ページ1に含まれる内容の要旨
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
SPK-WA511
On-Wall Active Speakers
P/N: 2900-300112 Rev 3
ページ2に含まれる内容の要旨
This page is intentionally left blank
ページ3に含まれる内容の要旨
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 4 Defining the SPK-WA511 5 5 Installing the Speakers 7 5.1 Choosing the Best Location 7 5.2 Installing the Speaker Wires 7 6 Technical Specifications 9 Figures Figure 1: Active On-Wall Speakers in a Home Theater Setup 4 Figure 2: Active On-Wall Speakers in a Conference Room Setup 4 Figure 3: SPK-WA511 Active Speaker 5 Figure 4: Connecting the Active Speaker to the Passive Speaker 7
ページ4に含まれる内容の要旨
This page is intentionally left blank
ページ5に含まれる内容の要旨
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
ページ6に含まれる内容の要旨
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high-performance high-resolution cables Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware i upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performanc
ページ7に含まれる内容の要旨
3 Overview The SPK-WA511 is a powered two-way speaker system designed for indoor wall mounting. The system accepts a line level stereo input and amplifies it using a built-in amplifier and outputs a speaker signal to the passive speaker. The SPK-WA511 speaker system features: • Three available inputs (that can either be connected separately or connected simultaneously to form a mix of the inputs) that consist of: A Line level unbalanced stereo audio input on a 3.5mm mini jack connect
ページ8に含まれる内容の要旨
Figure 1 and Figure 2 show examples of how the speakers can be installed in conference room and home theater setups, respectively. Figure 1: Active On-Wall Speakers in a Home Theater Setup Figure 2: Active On-Wall Speakers in a Conference Room Setup 4 SPK-WA511 - Overview
ページ9に含まれる内容の要旨
4 Defining the SPK-WA511 This section defines the active SPK-WA511: Figure 3: SPK-WA511 Active Speaker SPK-WA511 - Defining the SPK-WA511 5 5
ページ10に含まれる内容の要旨
# Feature Function 1 SPEAKER OUT Connectors Connect the active speaker to the (+) and (-) stereo sockets on the passive speaker The L speaker is active and the R speaker is passive 2 INPUT 5-pin Terminal Block Connect the audio source to one or more of the Connectors 3 3.5mm Mini Jack input connectors 4 L and R RCA 5 BASS Control Knob Rotate the button to control the bass 6 TREBLE Control Knob Rotate the button to control the treble 7 VOLUME Control knob Rotate the button to adju
ページ11に含まれる内容の要旨
5 Installing the Speakers This section explains how to: • Choose the best location for your speakers (see Section 5.1) • Install the speaker wires (see Section 5.2) 5.1 Choosing the Best Location Before installing the speakers: • Experiment by placing the speakers in different locations before finally deciding on the most suitable location • Be sure that the wall type is appropriate for the mounting brackets, that is, either solid wood, bricks, concrete, hollow building blocks, or w
ページ12に含まれる内容の要旨
2. Connect the audio source (for example, a CD or a DVD player and so on) to one of the INPUT connectors on the active speaker. 3. Connect the power. 4. Adjust the volume on the input source. 5. Adjust the volume control on the rear side control panel. 6. Adjust the bass and treble control on the rear side control panel. 7. If required, connect an additional set of speakers by connecting the LOOP OUTPUT connector to the input of a second active speaker. 8. If required, mount the speake
ページ13に含まれる内容の要旨
6 Technical Specifications Audio and Power DESCRIPTION: 2-way Bass Reflex active cabinet speaker HIGH FREQUENCY DRIVER: 1/2" MYLAR dome tweeter LOW FREQUENCY DRIVER: 5 1/4” Polypropylene cone with rubber edge woofer IMPEDANCE: 4Ω DISPERSION COVERAGE: 130° @2000Hz CROSSOVER FREQUENCY: 8000Hz NOMINAL SENSITIVITY: 85dB SPL @1m, 1W DAMPING FACTOR: >100 @ 8Ω/400Hz DIRECTIVITY FACTOR (Q): 5.8 (averaged 100Hz – 10kHz); 6.6 (2kHz) DIRECTIVITY INDEX (DI): 7.6dB (averaged 100Hz – 10kHz); 8.2
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
This page is intentionally left blank
ページ16に含まれる内容の要旨
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING Disconnect the unit from the power ! supply before opening and servicing P/N: 2900-300112 Rev: 3
