ページ1に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 1
RM94903
Universal
Remote Control
INSTRUCTION
MANUAL
ページ2に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 2 Table of Contents Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setting Up Your Universal Remote . . . . . . . . . . . . . . . .3 Programming Your Universal Remote For: TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 Cable Box or Other Device . . . . . . . . . . . . . . . . . .7-8 Operating A TV . . . . . .
ページ3に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 3 Button Description MUTE Operates the same as on your original remote. Indicator Light Flashes to show that the remote is working. POWER Operates the same as on your original remote. Device Buttons (TV, VCR/DVD, CBL/AUX) The TV, VCR/DVD and CBL/AUX buttons are used to select the home entertainment device you want to control. VOLUME and CHANNEL Operate the same as on your original remote. These buttons are also used to enter the code for your d
ページ4に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 4 Setting Up Your Universal Remote Place batteries in the remote 1. Remove the battery compart- ment cover. 2. Place two AAA batteries as shown, matching the + and – end of each battery as indi- cated in the battery compart- ment. 3. Replace the cover. Determine if your remote needs programming (Some RCA, GE and ProScan devices may already be pre-programmed. ) 1. Press the button of the device you want to control (for example TV). 2. If the devi
ページ5に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 5 Programming TV Using Code Lists 1. Manually turn on the TV. 2. Find the code for your brand in the list starting below. 3. Press and hold the TV but- ton for five (5) seconds, the Indicator Light will light up. 4. Release the TV button. The following buttons stand for each digit of the code: 1st Digit 2nd Digit 3rd Digit 5. Enter the first digit in the code with the REV button. Example: if the first num- ST ber is 3, depress the REV 1 CODE X N
ページ6に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 6 Programming TV Using Code Lists (con’t) 7. Enter the third digit in the RD 3 CODE code with the FOR button X NUMBER the same way as in step 5. If the number is 0, do not press FOR and proceed to next step. 8. Press STOP after code is entered and the Indicator Light will turn off. 9. With your TV on, press TV CODE CHANNEL Up. If the TV responds, no further programming is required. 10.Enter your code here for easy reference. Programming VCR or
ページ7に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 7 Programming VCR or DVD Player Using Code Lists (con’t.) The following buttons stand for each digit of the code: 1st Digit 2nd Digit 3rd Digit 5. Enter the first digit in the code with the REV button. ST 1 CODE Example: if the first number X NUMBER is 3, depress the REV button three times. If the number is 0, do not press REV and pro- ceed to next step. Note: The Indicator Light will blink after each number is entered. 6. Enter the second digi
ページ8に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 8 Programming VCR or DVD Player Using Code Lists (con’t.) 9. With your VCR or DVD player on, press CHANNEL Up. If the VCR or DVD player responds, no further programming is required. VCR/DVD CODE 10. Enter your code here for easy reference. Programming Cable Box Using Code Lists 1. Manually turn on the Cable Box. 2. Find the code for your brand in the list starting on the next page. 3. Press and hold the CBL/AUX button for five (5) seconds, th
ページ9に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 9 Programming Cable Box Using Code Lists Note: The Indicator Light will blink after each number is entered. 6. Enter the second digit in the code with the PLAY button ND 2 CODE the same way as in step 5. X NUMBER If the number is 0, do not press PLAY and proceed to next step. 7. Enter the third digit in the code with the FOR button RD 3 CODE NUMBER X the same way as in step 5. If the number is 0, do not press FOR and proceed to next step. 8.
ページ10に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 10 Operating A TV Turning the TV On and Off. 1. Press TV to set the remote to control the TV (most RCA, GE and ProScan models will only turn on when pressing TV not power). 2. Press POWER to turn the TV on or off. Change Channels and Volume on the TV. Press VOLUME UP or VOLUME DOWN to change volume on the TV. Press CHANNEL UP or CHAN- NEL DOWN to change chan- nels on the TV. Operating A Cable Box Turning the Cable Box On or Off. 1. Point the rem
ページ11に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 11 Operating A DVD Player Turning the DVD Player On and Off. 1. Point the remote at the DVD player and press VCR/DVD. 2. Press POWER to turn the DVD player on or off. 3. Press CHANNEL UP or CHAN- NEL DOWN for DVD SKIP functions. 4. Use REV and FOR for DVD reverse and forward func- tions. Operating A VCR Operating A VCR Turning the VCR On or Off. 1. Press VCR/DVD to set the remote to control the VCR. (Most RCA, GE and ProScan models will only tur
ページ12に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 12 Operating A VCR Operating A VCR (con’t) 4. Press STOP when you are finished. 5. Press REW to rewind the tape. 6. Press PAUSE to pause the tape. 7. Press RECORD twice to begin recording. Programming Using Code Search If your TV, VCR or Cable Box does not respond to your remote after you have tried all the codes for your brand, try searching for your code. Program a device button using Code Search. 1. Manually turn on your TV, VCR or Cable
ページ13に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 13 Code Retrieval If you need to find the three digit code after you have set up your remote, use this procedure. 1. Press the Device button (TV, VCR/DVD or CBL/AUX) for five (5) seconds. The Indicator Light will go on. Then release the device button. ON 2. Then press the Device button (TV, VCR/DVD or CBL/AUX) again. The Indicator Light will go off. Release the device button. OFF 3. For the first digit in the code, press the REV button and coun
ページ14に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 14 Operating A TV/VCR Combo Unit Some TV/VCR combination units may be con- trolled by using a combination of TV and VCR codes. For example, the Samsung TV/VCR combo unit may be controlled by both the Samsung TV code and the Samsung VCR code. GE, RCA and ProScan Brand Devices: Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming is required, the code search method is suggested. Note: With these bran
ページ15に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 15 Additional Electronic Products For additional electronic products, check out our web site at www.ge-electronics.com. Lost Your Codes? Enclosed with this remote is a sticker on which you should write the codes for each device you programmed. Apply the sticker to the back of the remote or somewhere convenient for future reference. Also on the sticker is our website address which, should you lose your codes or pro- gramming instructions, you can
ページ16に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 16 Indice Descripción del botón . . . . . . . . . . . .15-16 Arreglo su telecontrol universal . . . .16-17 Programando su TV telecontrol universal para: TV . . . . . . . . . . . . . . . . . . . . . . . .17-19 VCR/DVD . . . . . . . . . . . . . . . . .19-21 El rectángulo del cable/AUX . . . .21-23 Funcionamiento del TV . . . . . . . . . . . .23 Funcionamiento del rectángulo del cable . . .24 Funcionamiento del VC
ページ17に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 17 VOLUME and CHANNEL Funcione igual que en su telecontrol origi- nal. Estos botones también se utilizan para introducir el código para su dispositivo. Los botones del VCR Los botones de REV (rebobinado), del PLAY, del FOR (delantero rápido), de REC (expediente), STOP, y PAUSE controlan las mismas funciones que ésas encontradas en su telecontrol del VCR. Arreglo su Telecontrol Universal Ponga las baterías en el tele- control: 1. Alejado quita
ページ18に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 18 2. Si el dispositivo se gira, presione otro botón para confirmar (por ejemplo canal para arriba). 3. Si el dispositivo que usted seleccionó (TV) responde, usted no necesita programar el telecontrol. Si el disposi- tivo que usted seleccionó (TV) no responde, usted necesita programar el tele- control. 4. Relance los pasos de pro- gresión 1-3 para otros dis- positivos. Programación del TV usando Listas De Código 1. Gire manualmente la TV.
ページ19に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 19 4. Versión el botón de la TV. Los botones siguientes están parados para cada dígito del código: 5. Incorpore el primer dígito ST 1 CODE en el código con el botón de X NUMBER REV. Ejemplo: si el primer número es 3, presione el botón de REV tres veces. Si el número es 0, no presione REV y proceda al paso de progresión siguiente. Nota: La luz de indicador centelleo después de que se incorpore cada número. 6. Incorpore el segundo dígi-
ページ20に含まれる内容の要旨
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 20 8. Presione STOP después de que se introduzca el código y la luz de indicador darán vuelta apagado. 9. Con su TV encendido, presione CHANNEL para arriba. Si responde la TV, TV CODE se requiere la programación no adicional. 10. Introducza su código aquí para la referencia fácil. Programación su VCR usando Listas De Código 1. Gire manualmente el VCR. 2. Encuentre el código para su marca de fábrica en la lista que comienza abajo. 3. Pres
