ページ1に含まれる内容の要旨
Mini Remote
®
INSTEON Remote Control Keypad, 8 Scene
(formerly RemoteLinc 2)
Owner’s Manual
2342-222, 2444A3WH8 (US)
2342-422 (EU)
2342-522 (AUS/NZ)
Page 1 of 16 2342-222/2444A3WH8, 2342-422, 2342-522 Rev: 11/19/2013 8:18 AM
ページ2に含まれる内容の要旨
About Mini Remote ........................................................................................................................................................ 3 Features & Benefits....................................................................................................................................................... 4 What’s in the box? ...................................................................................................................................
ページ3に含まれる内容の要旨
About Mini Remote INSTEON Mini Remote is the smallest, most versatile INSTEON controller in the world. This wireless 8- button controller can easily be reconfigured to give you toggle control of up to 8 scenes and/or devices. Mini Remote can be: - Handheld (wireless remote) - Mounted on wall with no trim plate (wireless keypad) - Mounted on wall in a single-gang Decorator trim plate (wireless keypad, built-in look) - Mounted on wall in a multi-gang Decorator trim plate (add to the numbe
ページ4に含まれる内容の要旨
Features & Benefits • Small, elegant design • Super-easy setup • Rechargeable battery included • 8 Scene On/Off toggle control • Can be reconfigured for 4 scene control with discrete On and Off buttons • Can be installed into a single Decorator style opening (requires Wall-Mount Bracket, sold separately) • Can be used as a table-top controller (requires Tabletop Stand, sold separately) • Can be used as a visor-mounted remote control for lights, garage door opener etc. (requires Visor Cli
ページ5に含まれる内容の要旨
Optional Accessories Wall Mount Bracket (2444B4) • Wall mount your Mini Remote anywhere • Gang two or more together for more control • Can be installed adjacent to existing wired-in switches • Mini Remote can easily be removed for portability or recharging • Use with any decorator wallplate Pair the Wall Mount Bracket with any decorator style wall plate (sold separately) for the perfect wireless wall switch solution. Tableto
ページ6に含まれる内容の要旨
Getting Started Fully charge your Mini Remote prior to programming or anytime the unit is not responding. Mini Remote charges via a USB cable (Type A to Micro-B, sold separately). The red charging LED will turn off once the battery has been fully charged (approximately 1 hour). To turn on Mini Remote, simply slide the power switch to the on position. Note: Mini Remote uses a subtle beeper sound to assist setup. It is recommended that you program the unit in a quiet area. Scenes Scene: O
ページ7に含まれる内容の要旨
3) Press and hold the Mini Remote set button until it beeps again LED will being blinking red 4) Press and hold the Responder’s Set button until it double-beeps (or LED blinks) Mini remote will double-beep and its LED will stop blinking 5) Confirm that scene removal was successful by tapping the Mini Remote button on/off Responder will not respond 6) If you wish to remove multiple responders from Mini Remote, repeat steps 1-5 for each additional responder (or see Remove Mini Rem
ページ8に含まれる内容の要旨
Turn Unit On/Off (Pocket Mode) The Mini Remote features a power switch located next to the Set button. If you plan on carrying the Mini Remote in your pocket it is recommended that you turn it off to prevent buttons from accidentally being pressed. This is also recommended if your Mini Remote will not be in use for long periods of time. Power Switch (right On, left Off) Stuck Button If a button on Mini Remote is held for more than 4 minutes, the Mini Remote will automatically st
ページ9に含まれる内容の要旨
Change Button / Scene Configuration (e.g., Change to 4 Button Mode) 1) Press and Hold Set Button for 3 seconds - until you hear a beep LED will blink green nd time for 3 seconds - until you hear a beep 2) Press and Hold Set Button a 2 LED will blink red rd 3) Press and Hold Set Button a 3 time for 3 seconds - until you hear a beep LED will blink green th 4) Press and Hold Set Button a 4 time for 3 seconds - until you hear a beep LED will blink red 5) Tap Set Button LED will double-bli
ページ10に含まれる内容の要旨
LED Off a, v LED On (default) a, ^ Mini Remote will double beep and its LED will turn off Turn Beeper On During Usage (or Back Off) 1) Press and Hold Set Button for 3 seconds - until you hear a beep LED will blink green nd time for 3 seconds - until you hear a beep 2) Press and Hold Set Button a 2 LED will blink red rd 3) Press and Hold Set Button a 3 time for 3 seconds - until you hear a beep LED will blink green 4) Tap Set Button LED will double-blink green 5) Press the
ページ11に含まれる内容の要旨
Failure to add a scene responder Long Beep (3 seconds) Exiting Stuck Button Long Beep (3 seconds) LED Behavior During Setup Mini Remote has a two-color LED (Green & Red) which displays helpful information. LED State Meaning Blinking Green slowly Add Responder Setup Mode, or LED on/off Setup Mode Blinking Red slowly Remove Responder Setup Mode, or Double-Blinking Green slowly Multi-Add Responder Setup Mode, or Beeper on/off Setup Mode Double-Blinking Red slowly Multi-Remove Respond
ページ12に含まれる内容の要旨
Specifications General Product Name Mini Remote 8-Scene (formerly RemoteLinc 2) Brand INSTEON Manufacturer product number 2342-222, 2444A2WH8 (US) 2342-422 (EU) 2342-522 (AUS/NZ) UPC 813922012279 (US) 813922012569 (EU) 813922012576 (AUS/NZ) FCC ID SBP23422 Patent Number Protected under U.S. and foreign patents (see www.insteon.com/patents) Warranty 2 Years, Limited INSTEON Scenes 8 (default), configurable to 4 Scene Configurations 8 Toggle (default), 8 Always On or 4 On/Off Maxi
ページ13に含まれる内容の要旨
Beeper Yes, configurable Battery Charging LED Yes, Embedded (shines red through case during charge) RF Range 50’ Line-of-Sight RF Frequency 915MHz (US) 869MHz (EU) 921MHz (AUS/NZ) Retains all settings without power Yes, all saved in Non-volatile EEPROM Mechanical Color White Plastic UV stabilized ABS Dimensions 2.6" H x 1.3" W x 0.39" D Weight (w/battery) 1 Oz. Button Style Plastic Paddles over Contact Switches Optional Hardware Wall Mount Tabletop Stand Visor Clip Operating En
ページ14に含まれる内容の要旨
Problem Possible Cause Solution Responder’s Load doesn’t appear to turn on right The Ramp Rate may be set too slow. Re-link to Responder with fast Ramp Rate away Remove all unused Responders from the Mini Remote. HINT: If you are using home automation Responder(s) is taking a Mini Remote may be sending software, you can easily check scene membership long time to respond to a commands to a Responder(s) that is no and eliminate unnecessary Links Mini Remote longer in use If the above d
ページ15に含まれる内容の要旨
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of INSTEON products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing th
ページ16に含まれる内容の要旨
Protected under U.S. and foreign patents (see www.insteon.com/patents) © Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022, www.insteon.com Page 16 of 16 2342-222/2444A3WH8, 2342-422, 2342-522 Rev: 11/19/2013 8:18 AM
