ページ1に含まれる内容の要旨
Avital Model 5303
2-way remote
Owner’s Guide
Addendum
© 2008 Directed Electronics, Vista, CA
ADG5303L 2008-07
ページ2に含まれる内容の要旨
Contents Government Regulations ............................................................................................................... 3 About this addendum ................................................................................................................... 4 Remote configuration .................................................................................................................... 4 LCD 2-way remote ...........................................................
ページ3に含まれる内容の要旨
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agains
ページ4に含まれる内容の要旨
About this addendum This guide only includes information about using the Avital 5303’s LCD 2-way remote. For complete information about the 5303 Remote Start Security system, please consult the Owners Guide. Remote configuration ➤ LCD 2-way remote 4 3 2 1 5 31 6 30 7 29 8 28 9 27 10 26 11 25 12 24 13 23 14 22 15 21 20 16 19 17 18 © 2008 Directed Electronics. All rights reserved. 4
ページ5に含まれる内容の要旨
1 Vehicle Interior Temperature Indicator 2 Numeric Display 3 AM/PM Indicator 4 Alarm Clock Mode Indicator 5 Timer Function Indicator 6 Transmit Range Indicator 7 Transmission Indication 8 Vibrate/Beep Mode Indicator 9 Power Saver Mode Indicator 10 Remote Start Timer Mode Indicator 11 No Function 12 Vehicle Page Mode Indicator 13 Full Trigger Shock Sensor Indicator 14 Hood/Trunk Open or Trigger Indicator 15 Parking Light Indicator 16 Door Open or Trigger Indicator 17 Arm/Lock Bu
ページ6に含まれる内容の要旨
➤ System maintenance The system requires no specific main te nance other than battery replacement for the remote. LCD 2-Way Remote Battery Replacement The 2-way remote is powered by a 1.5V AAA battery. The Battery indicator has three levels that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the remote will generate a single notification chirp, and the Battery Level indicator will flash continuously. To replace the
ページ7に含まれる内容の要旨
LCD 2-way remote functions The remote buttons are used to send commands to the system. The descriptions below reflect the standard con- figuration for this system. The buttons can be custom configured for the user’s specific needs by the installer. ➤ Standard button configuration Button The System Arm/Lock and Multi-Level Security Arming functions are controlled by pressing this button. ������� Button The System Disarm/Unlock and High Security Disarm functions are controlled by pressing thi
ページ8に含まれる内容の要旨
������� ������� and Buttons The numeric display toggles between the time of the day and the alarm clock when these buttons are pressed simultaneously. ������� and Buttons Press these buttons simultaneously to activate the parking timer. Each additional press will toggle through the available options (10 min., 20 min., 30 min., 1 hour, 1.5 hours, 2 hours, and off). ������� and Buttons ������� When pressed simultaneously these buttons toggle between beep notification and vibrate notifica
ページ9に含まれる内容の要旨
The remote start timer mode icon indicates that the 24-hour Auto start feature is active. It automatically remote starts 24 hours from the time activated. The VRS mode icon has no function. The vehicle page mode icon displays when the alarm module is paging the remote. Page mode is activated when the valet switch in the vehicle is pressed and held for 4 seconds. The full trigger shock sensor icon indicates that the shock sensor has been triggered by a hard shock. and The hood/trunk ope
ページ10に含まれる内容の要旨
LCD 2-way button functions Function Button (s) Icon Audio ������� Lamp On (10 sec) ������� Power Saver Mode Melody + ������� Beep/Vibrate Mode 4 Vibrations/ 1 Beep + ������� Time Adjust Mode (hour)** 2 beeps + for 5 secs. ������� ������� ������� Time Adjust Mode (min) ** 1 Time*** ������� Alarm Clock Set Mode (hour)** 2 Times** ������� Alarm Clock Set Mode (min)** 3 Times ������� Alarm Clock Music or Power on Music 5 Selections 4 Times*** Selection 1/2/3/4/5 ������� Alarm Clock
ページ11に含まれる内容の要旨
LCD 2-way remote operation The remote start system operates at 434 MHz and incorporates Directed’s proprietary A.S.K. out-board two-way remote. The high frequency combined with Binary Data communication achieves superior range with two-way communication. ➤ Paging features The control module sends a page to the remote as confirmation of a received command, or alarm system status. When the remote receives a page a notification, it beeps or vibrates and the alarm status, armed or disarmed, (the
ページ12に含まれる内容の要旨
• Hood Trigger - Opening the hood will sound the siren, flash the lights for the programmed duration, and report Zone 1. • Trunk Trigger - Opening the trunk (if connected) will instantly sound the siren and flash the lights for the pro- grammed duration and report Zone 4. • Ignition Trigger - If the ignition is turned on the siren will chirp for three seconds, then the siren will sound and the lights will flash for the programmed duration and report Zone 5. When a Triggered Response is activat
ページ13に含まれる内容の要旨
The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consum- ers with the finest vehicle security and car stereo products and accessories avail- able. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for
