ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
I WARNINGI ! Always exercise caution and common sense when operating your AviStart system. ! This product is intended for vehicles with fuel-injection and automatic transmissions only. NEVER attempt to remote start a vehicle with a manual (stick shift) transmission. Serious injury may occur with improper use. ! NEVER attempt to remote start the engine while anyone (including pets) is in the vehicle. ! NEVER attempt to remote start the engine while the vehicle is in an enclosed area without suffi
ページ3に含まれる内容の要旨
Table of Contents AviStart 4001 .............................. . 2 Lifetime Warranty ............................ 2 Remote Controls ............................ 2 Stealth Coding Technology....................... 3 Electronic Scan Prevention (ESP).................... . 3 Instant Remote Control Code Deletion................. . 3 One-Step Remote Control Code Learning ............... . 3 Valet Switch.............................. . 3 Operating Your AviStart.......................... 4 Remote-Contro
ページ4に含まれる内容の要旨
AviStart 4001 Congratulations! You have just purchased the AviStart 4001, a keyless entry and remote engine starter system manufactured by Avital Technologies. You are about to experience the convenience and luxury of being able to start your vehicle engine from the comfort of your home, office, department store or other remote location. To benefit fully from the capabilities of your AviStart system, we encourage you to read the Owner’s Manual thoroughly before using the system. If you should h
ページ5に含まれる内容の要旨
Stealth Coding Technology Stealth Coding™ technology offers the most advanced protection available against "code-grabbing" devices which thieves may use to record the digital code transmitted by your remote control. When you leave the area, thieves can then play back the code to unlock the doors and deactivate your system. But Avital’s remote controls with Stealth Coding™ randomly change the code every time you use them, and your system will not respond if any code is retransmitted. This tech
ページ6に含まれる内容の要旨
Operating Your AviStart Remote-Controlled Door Lock/Unlock* To Lock the Doors: Press the remote control C button for 1-2 seconds. The doors will lock, the parking lights will flash twice and the dash mounted LED will flash slowly. If the Remote Lock Starter Disable feature was programmed ON, the vehicle starter motor will be disabled. (See the "Programming Table for System Features" on page 11.) * If your sys tem was in stalled with this door lock/un lock fea ture, all other door lock/unlock re
ページ7に含まれる内容の要旨
To Activate: 1. Press the remote control C button for 3-4 seconds. 2. The siren/horn will sound and the parking lights will flash. 3. If the ignition key is "OFF," the doors will unlock. If the ignition key is "ON," the doors will lock. To Deactivate: 1. Press the remote control Cbutton for 1-2 seconds. 2. The siren/horn will shut off and the parking lights will stop flashing. User-Programmable Starter Disabl e The AviStart can be programmed to electronically disable the vehicle starter every ti
ページ8に含まれる内容の要旨
Remote Engine Start - Safety and Counter-Theft CAUTION: Be sure to read the "WARNING" bulletin on the inside I cover of this manual before attempting to operate remote start. Automatic Safety and Counter-Theft Features Before remote starting your engine, the AviStart system will automatically perform a safety check to ensure the following conditions have been met: • Brake pedal is not depressed. • Engine and ignition are turned off. • Hood is closed. After remote starting your engine, the AviSt
ページ9に含まれる内容の要旨
To Remote Start the Engine: 1. Press the remote control s button for 1-2 seconds, 10-15 minutes before you enter the vehicle (this will allow the climate control time to heat or cool the vehicle.) The parking lights will flash 2 times, the engine will start and the parking lights will remain on as a visual indication that the engine is running. AviStart will automatically lock the doors when the engine is remote started. If you have a diesel engine, the AviStart will be programmed to start 15
ページ10に含まれる内容の要旨
temperature every 2½ hours and will only start the engine during extreme cold temperatures. There are three temperature levels to choose from. (This feature is programmed OFF from the factory and must be programmed ON to operate. (See the "Programming Table for System Features"on page 11). To Activate: Press the remote control Cand s buttons at the same time. The parking lights will turn on for 3 seconds, shut off for 1 second and turn on for 3 seconds. This will be your visual indication that
ページ11に含まれる内容の要旨
4. Press the remote control Cbutton for 1-2 seconds to secure your vehicle. To Deactivate: 1. When you return to the vehicle, press the remote control Dbutton for 1-2 seconds. The doors will unlock. 2. Enter the vehicle (do not touch the brake pedal), turn the ignition key to the "ON" position and then press the brake pedal. The parking lights will shut off and you will now be able to drive the vehicle. Protected Valet Mod e You should place your system in Protected Valet Mode whenever your vehi
ページ12に含まれる内容の要旨
User-Programmable Features All AviStart system and remote control programmable features are accomplished by turning the ignition key on (or starting the engine) and flicking the valet switch on and off a preset number of times. The AviStart also allows you to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control functions. 1. Remove the system from Protected Valet Mode. Programming cannot be accessed while the system is in Prot
ページ13に含まれる内容の要旨
Programming Table for System Features Factory No. of Feature Secondary Action Setting Beeps Ignition-Controlled Wait 3 seconds, the piezo beeper will beep ON 7 Lock/Unlock once for OFF, twice for ON. Wait 3 seconds, the piezo beeper will beep Passive Starter Disable OFF 8 once for OFF, twice for ON. Remote Lock Starter Wait 3 seconds, the piezo beeper will beep ON 9 Disable once for OFF, twice for ON. Remote Start Run Time Wait 3 seconds, the piezo beeper will beep 20 Minutes 12 once for 30 minu
ページ14に含まれる内容の要旨
Programming Table for Remote Controls Factory No. of Feature Secondary Action Setting Beeps Press the Cbutton, the piezo beeper will Remote Door Lock/Panic C Button 16 beep 1 time. Press the Dbutton, the piezo beeper will Remote Door Unlock D Button 17 beep 2 times. Press the s button, the piezo beeper will Remote Engine Start s Button 18 beep 3 times. Press the dbutton, the piezo beeper will Remote Trunk Release d Button 19 beep 4 times. Temperature-Controlled C + s Press the C + s buttons, the
ページ15に含まれる内容の要旨
Life time Lim ited Fac tory War ranty - Terms and Con di tions Avital ve hi cle se cu rity sys tems and ac ces so ries re quire pro fes sional in stal la tion by an Authorized Avital Dealer. Un less the sys tem is sold and in stalled by an Authorized Avital Dealer, all prod uct war ran ties are void. As the manu fac turer, Avital Technologies war rants to the origi nal con sumer pur chaser, the sys tem con trol unit and re mote con trols to be free from de fects in ma te rial and work man ship f
ページ16に含まれる内容の要旨
Your sys tem se rial number is: Place se rial number sticker here © 1999 Avital Technologies, Inc., A Division of Clifford Electronics Part Number: 31-4001/AviStart4001OM/1099 AviStart 4001 Owner’s Manual 1099
