ページ1に含まれる内容の要旨
TWO-WAY 6 - BUTTON LCD AU TOMATI C/MANUAL
TRANSMISSION REMOTE STAR TER
AS-3472TW-FM
User Guide
WARNING
It is the responsibility of the vehicle operator to ensure their vehicle
is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic trans
ページ2に含まれる内容の要旨
Table of Contents Introduction ............................................................ 2 Ignition Relock .................................................. 13 Using the Transmitter............................................ 3 Secure Lock ...................................................... 13 LCD Remote Functions ...................................... 3 Remote Trunk Release..................................... 13 Vehicle Presets......................................................
ページ3に含まれる内容の要旨
Using the Transmitter Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two independent vehicles equipped with identical remote starters (see Multi-car operation section, later in this Guide, for second-car transmitter functions). LCD Remote Functions The transmitter offers several command-confirmation and timer features. This section explains some of the key functions available. The next section gives a summary of the button combinations used to
ページ4に含まれる内容の要旨
Backlight Button Press for < 1 second Backlight ON for 3 sec. Press for > 3 seconds and < 5 seconds Backlight ON for 3 sec. Press for > 5 seconds Backlight will stay ON until button is released. Selecting and adjusting Menu options: When in MENU, press button to enter the menu. Press button to move up in the menu or button to move down in the menu. Press button to select the option you would like to adjust. Press button to increase the value, activate or deactivate a f
ページ5に含まれる内容の要旨
colors 8 LCD On Menu LCD OFF 01 OFF 15 1 min., 15 min., 30 min., 60 min. and LCD on time OFF 30 ON OFF 60 1 min. is default. ON 9 Clock Menu CLOCK 12:00 Adjust clock hour(s) Clock hour 12 is flashing. (value from 0 to 12) 12:00 Adjust clock minute(s) Clock minute 00 is flashing. (value from 0 to 59) 10 Temperature Menu TEMP CTEMP Deg Celsius or Fahrenheit Temperature Or Deg. Celsius is default FTEMP 11 Language Menu LANGU ENG Language Or English is default FRAN
ページ6に含まれる内容の要旨
Valet menu: When this feature is enabled, press to enter Valet mode. When this feature is disabled, press + buttons simultaneously. Time start menu: This feature is used to remote start the car at a pre-programmed time. Once the pre-programmed time is reached, the remote will send a start command to the car module. Secure Remote feature: This feature is used to lock the keypad of the transmitter to avoid accidental button press. When the remote is locked and a button is pressed, th
ページ7に含まれる内容の要旨
Button LCD Beep(s) Temperature L --01 → Trunk button L --01 → Start button CWM or MTF text for 1s 1 beep (pressed more than 3s) L --02 → Lock button LOCK and Lock icon 1 beep nd (2 car unlock) nd L --02 → Unlock button (2 ULOCK and Unlock icon 2 beeps car unlock) nd L --02 → Trunk button(2 car TRUNK text for 1s 1 beep trunk) nd L --02 → Start button(2 car START text for 1s 1 beep start) L --03 → Lock button 1 beep (Channel 1) L --03 → Unlock button 1 beep (Channel 2) L
ページ8に含まれる内容の要旨
- The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if configured this way) if no door is left opened (if the doors are monitored) and the ignition is not turned ON. Active Mode: • To arm the Starter Kill, press the LOCK button on the transmitter. - The parking lights will flash once. - The LED on the antenna will flash slowly. - If remote door locks are installed, this will also lock the doors and arm the OEM-style alarm. • To disarm the
ページ9に含まれる内容の要旨
c. START/STOP to shut down the engine without affecting the doors. Note: The vehicle will also enter Ready Mode once the engine run time expires. Remote-starting Press the button for approximately 1 second. The parking lights will come ON to inform you that the remote starter has received your signal. Approximately 5 seconds later, the engine will start. The parking lights will remain ON during the pre-programmed run time of the engine. If the vehicle does not start at the first attempt,
ページ10に含まれる内容の要旨
Valet Mode When your vehicle is in Valet Mode, the remote starter and alarm (if configured) functionalities are disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-started accidentally. Any of the following features will put your remote car starter into Valet Mode: • Ignition Valet: This feature allows you to put your system into Valet Mode by using the ignition key. • Remote valet: This feature allows yo
ページ11に含まれる内容の要旨
The parking lights will flash twice and the LED on the antenna will flash quickly to indicate that the vehicle is now out of Valet mode. • To put the system o u t o f Valet mode using the PUSH BUTTON SWITCH (Valet Switch Mode): a. Insert the ignition key into the ignition switch. b. Turn the key into the ON position c. Within 5 seconds, press the push button switch until the Parking lights flash twice. d. Release the push button and turn the ignition to the OFF position. The LED on
ページ12に含まれる内容の要旨
The parking lights flash three times. To exit Cold Weather Mode, do any one of the following actions: • Open the hood. • Start the engine by remote. • Turn the ignition key to the IGNITION ON (RUN) position. • Press and release the button. You will hear a beep. L-01 will appear on the display. • Within 3 seconds, press and hold the button for at least 3 seconds. The remote control will beep once, then once again when the icon disappears. The parking lights flash once. To
ページ13に含まれる内容の要旨
Passive or Active Arming of the Starter Kill See section “Arming the Starting Kill” earlier in this guide. OEM-Style Alarm The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the ignition. • To arm the OEM-style alarm, press the LOCK button on the transmitter. - The OEM-style alarm will ONLY arm if the LOCK button on the transmitter is press
ページ14に含まれる内容の要旨
Safe Start If this feature is enabled, the user must press the START/STOP button twice within 3 seconds to remote-start the vehicle. This will eliminate accidental remote starts, e.g. when children are playing with the transmitter. • To remote-start your vehicle if Swap Start Mode is selected, press and then LOCK. • The AUX 2 output can be activated by pressing the START/STOP button. Installer-programmable Valet Mode TM “Home Valet ” Mode If configured at installation, this feature wil
ページ15に含まれる内容の要旨
Note: The vehicle will enter Ready Mode once the engine run time expires. Engine Run Time If you have a gas engine, your remote starter can be programmed to run the engine for 3, 15, or 25 minutes (15 minutes by default). If you have a diesel engine, the remote starter can be programmed to run the engine for 8, 20, or 30 minutes (20 minutes default). (Indication purpose only) How to Access to Runtime Status Function By pressing Icon Gasoline Diesel 3 minutes 8 minutes Engine runti
ページ16に含まれる内容の要旨
Press + simultaneously: .................................................. LOCK Press + simultaneously:................................................... UNLOCK Press + simultaneously: .................................................................START Press + simultaneously:................................................... STOP Press : ........................................................... TRUNK or Press :.........................................................
ページ17に含まれる内容の要旨
Missing a Start or a Stop Confirmation If you have not received a Start or the Stop confirmation after pressing the button, simply press the button. Pressing the button will refresh the display and will confirm if the vehicle was started or stopped. No Start Confirmation Was Received: If after remote starting the vehicle no confirmation was received, simply press the button, this will refresh the display. If the vehicle was started successfully, the icon will appear as well as the
ページ18に含まれる内容の要旨
: customized feature 4 Accessing the Multi-Level Features and Other Transmitter Functions To access a Level 1 feature, press and release the button and you will hear a “beep”; L-01 will be displayed. This display means that you are now in Level 1. Simply press the corresponding button to access the desired feature. To access a Level 2 feature, press and release the button and you will hear a “beep’’; L-02 will be displayed. This display means that you are now in Level 2
ページ19に含まれる内容の要旨
Troubleshooting Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: • The condition of the battery in the transmitter. • The operating environment (for example: downtown radio-frequency noise, airports, cellular phone towers…). • Metal: any type of metal will affect operating range. This includes the vehicle itself. • The shape of the vehicle can affect range as well (vans in general have less range). • The shape of the roof and A-pillars
ページ20に含まれる内容の要旨
LIMITED LIFETIME WARRANTY REMOTE STARTERS AND ALARM SYSTEMS: As the manufacturer, 4366859 Canada Inc. (“Autostart”) warrants to the original consumer purchaser only (nontransferable) that the remote starter module (control box) shall be free from defects in materials and workmanship for as long as the original consumer purchaser continuously owns the vehicle in which the remote starter was originally installed, as specified below: 1) For the first two years after the date of manufacture, a
