ページ1に含まれる内容の要旨
TBXPAL
Remote Operation (1)
TV Mode
Button Function
1. POWER Power On/Off
3. A/P (AUTO PROGRAM) Channel Scanning
4. / 5./ 14./ 16. ( ▲ ◄ ► ▼) Up/Down/Left/Right
6. CH (+/-) Channel Up/Down
7. 1/2/3/4/5/6/7/8/9/0 Numbers
8. LED TV Mode – Red Flash
DVD Mode – Green Flash
9. TV TV Mode Selected
11. MUTE (TV) Mutes Audio
To prevent battery leakage which may result in
bodily injury or damage to the remote:
12. MENU OSD Menu for TV setting
1. Install all bat
ページ2に含まれる内容の要旨
Remote Operation (2) Button Descriptions Included Remote 1 MENU 1. Press “MENU” to activate the OSD menu. 2. Press again to navigate options TUNER MODE (RF input mode) AUDIO OUTPUT (audio output mode) CHANNEL SKIP (channel skip mode) RESET:(restore to factory default value) 3. Press ◄ or ► to browse and select an option. OSD menu will disappear 6 seconds after no input. 2 ◄ / ► Browse and select an option for a item in the OSD menu 3 VOL- Decrease the volume of so
ページ3に含まれる内容の要旨
Basic Operations rd rd 1. Power TBXPAL On 5-3 Press [ MENU ] 3 time. The 3 menu item is “CHANNEL SKIP”. 1-1 Feed the “+12VDC” power supply to TBXPAL’s “POWER INPUT” socket. Press [ ► ] or [ ◄ ] to turn the skip mode “ON” or “OFF”. When skip mode is “ON”, pressing [ CH+ ] or [ CH- ] will go to next or previous 2. Set TV source to A/V input broadcasted channel. When skip mode is “OFF”, pressing [ CH+ ] or [ CH- ] will increase or decrease 3. Scan Channels and Auto-programming
ページ4に含まれる内容の要旨
Installation Instructions 1. Locate a suitable location close to “AV monitor” (Television, etc.) 2. Connect Red wire to +12VDC Accessory Source. 3. Connect Black wire to a known chassis ground -12VDC 4. Plug the other end of the DC power cord into the TBXPAL. 5. Connect TBXPAL A/V output to TV A/V input using supplied RCA cable. 6. Connect TV coax cable to “TV ANTENNA INPUT”. 7. Plug the external IR cable for remote controlling. Connect the external IR cable and mount IR Senso
