ページ1に含まれる内容の要旨
Two-Way Radio Model MT 600
ENGLISH
1. Antenna
2. External Speaker/
Microphone/Charge Jack
3. Mode/Power Button
4. Lock Button
1 2
5. Channel Select Buttons
6. Speaker/Microphone
7. Light/Max Range Button
8. Volume Control Buttons
3
9. Talk Button
10
10. Call Button
4
11. Belt Clip
9
12. Battery Compartment
13. Lock Tab
5
8
11
7
6
12
13
Printed in China Part No. 480-329-P Version A
ページ2に含まれる内容の要旨
PRODUCT FEATURES English Features 1 2 3 • Two-Way Radio 4 with up to a 5 km (3 mile) range • 8 Channels* • 38 CTCSS Privacy Codes 11 5 • 83 DCS Privacy Codes • Backlit LCD Display 6 • Battery Saver Circuitry • Maximum Range Extender 7 • Call Alert (5 selectable tones) 10 • Scan (Channel, Privacy Codes) 8 9 • Vox Mode for Hands-Free Operation • Auto Squelch 1. Scan Icon 7. Battery Low Icon • Selectable On/Off "Roger Beep" Confirmation Tone 2. Roger Beep Icon 8. Privacy Code Numbers • Key Lock 3.
ページ3に含まれる内容の要旨
OPERATION English Charger and Rechargeable Batteries Remove Belt Clip Lock Tab Insert Batteries To Insert Batteries in Radio: 1. Remove belt clip by releasing belt clip latch and sliding clip up. 2. Push up on lock tab to remove battery cover. 3. Insert batteries according to polarity markings. NOTE: Estimated operation time on full charge: 12 hours. These rechargeable batteries must be recycled or disposed of properly in compliance with all applicable laws. They must not be thrown in the rubbis
ページ4に含まれる内容の要旨
OPERATION English Communicating with Another Person Talk Button 5 cm (2 Inches) From Mouth 1. Press and hold the TALK button. 2. With the microphone about 5 cm (2 inches) from your mouth, speak in a normal voice. 3. Release the button when you have finished talking and listen for a response. You cannot receive incoming calls while pressing the TALK button. NOTE: Both radios must be tuned to the same channel and privacy code to communicate. Listening for a Response Listening ® – Release the TALK
ページ5に含まれる内容の要旨
OPERATION English To Illuminate Display Light/Max Range Button – Press and release the LIGHT/MAX RANGE button to illuminate the display for 10 seconds. Auto Squelch/Maximum Range Extender ® Your microTALK radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise resulting from terrain, conditions or from reaching your maximum range limit. You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender, allowing all signals to be received
ページ6に含まれる内容の要旨
MODE FUNCTIONS OPERATION English Scrolling Through the Mode Functions ® By scrolling through the Mode Functions, you will be able to select or change preferred features of your microTALK radio. While you are scrolling through the Mode Functions, your radio features will be displayed in the same predetermined order: Set CTCSS Privacy Codes Set DCS Privacy Codes Set VOX On/Off Set VOX Sensitivity Level Set Channel Scan Set CTCSS Privacy Code Scan Set DCS Privacy Code Scan Set Call Tones Set “Roger
ページ7に含まれる内容の要旨
MODE FUNCTIONS OPERATION English DCS Privacy Codes Mode Button DCS OFF DCS (Digital Coded Squelch) is an advanced digital coding system allowing you to select one of 83 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If you are using a DCS code, both radios must be turned to the same channel and DCS privacy code to communicate. Each channel will remember the last code you selected. To Select a DCS Privacy Code: Select Privacy Code Channel Buttons 1. After se
ページ8に含まれる内容の要旨
MODE FUNCTIONS OPERATION English To Set the VOX Sensitivity Level: Mode Button Select VOX Channel Buttons Sensitivity Level 1. Press the MODE button until the VOX icon flashes and the current sensitivity level is displayed. The current sensitivity level is displayed with the letter “L” and a number 1 to 5, 5 being the most sensitive level and 1 being the least sensitive level. 2. Press the CHANNEL UP or CHANNEL DOWN button to change the setting. 3. When your desired VOX sensitivity level is disp
ページ9に含まれる内容の要旨
MODE FUNCTIONS OPERATION English CTCSS Privacy Code Scan Select Channel Mode Button ® Your microTALK radio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel. To Scan Privacy Codes: 1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the CTCSS privacy codes. Select Scan Privacy Channel Buttons Codes 2. Press the MODE button until the Scan icon, CTCSS icon and the small numbers flash on the display.
ページ10に含まれる内容の要旨
MODE FUNCTIONS OPERATION English DCS Privacy Code Scan Mode Button Select Channel You can automatically scan the DCS privacy codes (01 to 83) within one channel. NOTE: The radio must be in the CTCSS OFF MODE when scrolling through mode functions or DCS mode will be skipped. To Scan DCS Privacy Codes: 1. While in the LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the Channel Buttons Select Scan Privacy channel on which you wish to scan the DCS privacy codes. Codes 2. Press
ページ11に含まれる内容の要旨
MODE FUNCTIONS OPERATION English Set Call Tones Mode Button Select Call Tones You can choose between five (5) different call tones to transmit a unique call alert. To Change a Call Tone Setting: 1. Press the MODE button until the letter “C” is displayed. The current call tone number will be flashing on the display next to the “C.” The current call tone will sound for one (1) second. 2. Press CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings. Channel Buttons 3. When you have
ページ12に含まれる内容の要旨
D.O.C., WARRANTY & CUSTOMER SERVICE English Declaration of Conformity Warranty & Customer Service This declaration is the responsibility of the manufacturer/importer For warranty and customer service information, please contact your local dealer. Cobra Electronics Europe Limited Dungar House Northumberland Avenue Dun Laoghaire County Dublin, Ireland For use in EU countries, subject to local laws and regulations. Date: 15 January 2007 ® CEEL is a registered trademark of This certifies that the fo
