ページ1に含まれる内容の要旨
OWNER’S
MANUAL
19 INCH COLOR TV/VCR
WF319E
VIDEO AUDIO POWER EARPHONE
This Owner’s Manual is made of
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
recycled paper.
®
As an ENERGY STAR
Partner, our company has
If you need additional assistance for set-up or operating after
determined that this product meets
®
the ENERGY STAR guidelines for
reading owner’s manual, please call TOLL FREE : 1-800-242-7158.
®
energy efficiency. ENERGY STAR
Or visit our WEB SITE at http://www.funai-corp.com
is a U.S.
ページ2に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DAN- CAUTION GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT RISK OF ELECTRIC SHOCK WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). MAINTENANCE INSTRUCTIONS IN THE NO USER SERVICEABLE PARTS INSIDE. REFER LITERATURE ACCOMPANYING THE
ページ3に含まれる内容の要旨
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRI C SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 13.Outdoor Antenna grounding-If an outside antenna or 19.Damage Requiring Service-Unplug this TV/VCR from cable system is connected to the TV/VCR, be sure the the wall
ページ4に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION LOCATION Unauthorized recording or use of broadcast televi- For safe operation and satisfactory performance of sion programming, video tape, film or other copy- your TV/VCR, keep the following in mind when righted material may violate applicable copyright selecting a place for its installation: laws. We assume no responsibility for the unautho- Shield it from direct sunlight and keep it away • rized duplication, use, or other acts which inf
ページ5に含まれる内容の要旨
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .17 NORMAL PLAYBACK . . . . . . . . . . . . . . . . . .17 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 AUTO REPEAT PLAYBACK . . . . . . . . . . . . .17 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 AVOID THE HAZARDS OF ELECTRICAL STILL PICTURE . . . . . . . . . .
ページ6に含まれる内容の要旨
FEATURES Infrared remote control Zero Return–The tape returns to counter of • • 0:00:00 by rewinding or fast forwarding. Trilingual on screen menu display selectable in • English, Spanish, or French Still–Freeze the picture at any time, for close view- • ing of a particular scene. Only tapes recorded in Real time counter–This shows the elapsed record- • SLP mode will show a fairly clear picture. ing or playback time in hours, minutes, and sec- onds. The “–” indication will appear when the tape D
ページ7に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS NOTE: We do not recommend the use of universal remote controls. Not all of the functions may be controlled with • a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. - TV/VCR FRONT PANEL - VIDEO AUDIO POWER EARPHONE 1 2 3 4 5 6 7 8 910 11 12 13 14 1 VIDEO input jack– Connect to th
ページ8に含まれる内容の要旨
- REAR VIEW - ANT. 26 27 +100 button– When selecting cable channels 8 REW button– Press to rewind the tape, or to view which are higher than 99, press this button first, the picture rapidly in reverse during playback then press the last two digits. (To select channel mode. (Rewind Search) 125, first press the “+100” button then press “2” s button– and “5”). Press to select a mode from a particular menu. • 16 MENU button– Press to display the main menu on (for example: LANGUAGE or USER’S SET the
ページ9に含まれる内容の要旨
OUT IN PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS From Cable System or Satellite Dish VHF/UHF Antenna Satellite Box or Rod Antenna (Not supplied) Cable Box (Not supplied) (Not supplied) VHF Antenna (Not supplied) UHF Antenna From (Not supplied) or Cable System ANT. VHF/UHF Combiner or (Not supplied) ANT. or 75-ohm Coaxial Cable (Not supplied) Flat twin-lead cable or VHF/UHF COMBINED ANTENNA VHF/UHF SEPARATE ANTENNAS The VHF/UHF Rod Antenna (not supplied) is detach- In some areas it will be n
ページ10に含まれる内容の要旨
TO RECORD A SCRAMBLED/UNSCRAMBLED INSTALLING THE BATTERIES CHANNEL 1. Set the TV/VCR channel selector to the output 1)Open the battery compartment cover by pressing channel of the Cable Converter Box or Satellite the cover on the remote unit in the direction of the Box. (Ex. CH3) arrow. 2.Select the channel to record from your Cable 2)Insert 2 “AA” penlight batteries into the battery Converter Box or Satellite Box. compartment in the direction indicated by the polarity (+/-) markings. 3)Replace
ページ11に含まれる内容の要旨
In the example below, the clock is to be set to: 8 Start the clock DATE May 6th, 2004 Press the MENU button on the 5:40 PM SETTING TIME 5:40PM remote control. Although seconds are not displayed, 1 Select “SETTING CLOCK” they begin counting from 00 when Press the MENU button on the you press the MENU button on the – M E N U – TIMER PROGRAMMING remote control. remote control. Use this feature to PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP synchronize the clock with the correct time. Press the P
ページ12に含まれる内容の要旨
1 Select “SETTING CLOCK” 5 Turn off the TV/VCR Press the MENU button on the Once the TV/VCR is turned off , it will periodically – M E N U – TIMER PROGRAMMING remote control. check and set the correct date and time. PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP Press the PLAY/K or STOP/L but- USER’S SET UP V-CHIP SET UP ton to select “SETTING CLOCK”. LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN Press the F.FWD/B button to enter TIME SEARCH DAYLIGHT-SAVING TIME “SETTING CLOCK” menu. Select thi
ページ13に含まれる内容の要旨
DELETING (OR ADDING) CHANNEL SET UP CHANNEL You can program the tuner to scan all the channels you receive in your area. The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you NOTE: Channel memory programming is NOT can add the deleted channel into the memory again.) needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex 1 Select “CHANNEL SET UP” CH3). T
ページ14に含まれる内容の要旨
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL The TV/VCR’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are 1 Turn on the TV/VCR preset to factory specifications. Although they are Press the POWER button to turn on the TV/VCR. usually the best, you may need to make some further adjustments for a natural looking image. 2 Select the channel number NOTES: Press the CHANNEL K or L button to select your Procedures must be followed within 5 seconds or • desired channel numbe
ページ15に含まれる内容の要旨
TO CANCEL THE CLOSED CAPTION CLOSED CAPTION SYSTEM SYSTEM You can view specially labeled (cc) TV programs, Repeat steps [1] and [2], select [OFF] using the movies, news, pre-recorded tapes with either a dia- F.FWD/B or REW/s button. Press the MENU but- logue caption or text display. ton on the remote control to return to TV mode. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning WHEN THE CLOSED CAPTION MODE the dialogues and the contents of news.
ページ16に含まれる内容の要旨
3 Select your desired item 4 Exit the V-Chip setting mode Press the PLAY/K or STOP/L but- Press the MENU button on the remote control to ton to point to your desired item. B TV–Y [VIEW] return to original mode. TV–Y7 ( ) [VIEW] TV–G [VIEW] Then, press the F.FWD/B button to TV–PG ( ) [VIEW] TV–14 ( ) [VIEW] TV–MA ( ) [VIEW] select [BLOCK] or [VIEW]. MPAA RATING SET UP Make sure ... When you select the rating category and turn it • [BLOCK], the higher rating will turn [BLOCK] TV/VCR power must be
ページ17に含まれる内容の要旨
PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in The TV/VCR has the auto repeat function that allows gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The you to repeat a tape indefinitely without touching the TV/VCR will automatic
ページ18に含まれる内容の要旨
NOTES: SEARCH Time Search can be set up to a maximum of 9 • hours 50 minutes (9:50) by 10 minutes at a time. PICTURE SEARCH This function will not operate in recording mode. • This feature is very useful in finding or skipping over In the example below: To watch a program after 2 a particular scene on a tape. In this mode, the sound hour 50 minutes from the present position, in either will be muted. direction. 1)You may view a video tape at a high speed in either a forward or reverse direction b
ページ19に含まれる内容の要旨
NOISE CANCEL (in the Still mode) RENTAL PLAYBACK This feature allows you to reposition or reduce the This function enables you to improve the picture noise lines of a still picture.Press the PAUSE/STILL quality when playing back worn cassettes such as button so that the noise lines change position on the rented tapes. screen so you can see the picture in its entirety with- out distracting noise lines. 1 Select “USER’S SET UP” – M E N U – NOTE: This feature can be activated ONLY when TIMER PROGRA
ページ20に含まれる内容の要旨
Make sure ... TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to • the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is This function enables you to set a recording length being recorded. simply by pressing the REC/OTR button on the TV/VCR. 1 Select the chan
