ページ1に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 2
Table of Contents
6. Manual recording . . . . . . . . . . . . . . . . . . . . . . .12
1. Connecting the TV-Video Combi . . . . . . . . . . .3
General information . . . . . . . . . . . . . . . . . . . . .12
Important for the United Kingdom . . . . . . . . . .3
Recording without automatic switch-off . . . . . .12
Preparing the remote control for operation . . . . .3
Recording with automatic switch-off
Connecting the cable . . . . . . . . . . . . . . . .
ページ2に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 1 TVCR 14PV360/07 14PV365/07
ページ3に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 3 IN BRIEF The remote control EJECT A A To eject the cassette. STANDBY/ON y y To switch TVCR On or Off or to interrupt menu function. CLEAR To delete last entry/Clear programmed recording MENU To call up main menu of TVCR. (TIMER). EJECT STATUS/EXIT To access or remove the TVCR’s on-screen status display. To exit on- STANDBY/ON RECORD/OTR I To record the TV channel selected at this MENU STATUS/EXIT CLEAR screen menus. moment or press repeatedly to start a On
ページ4に含まれる内容の要旨
Front of the device Back of the set STANDBY Aerial input socket: To connect the aerial cable. Power switch: To switch the TV-Video Combi off. EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc. Caution: If you switch off using the power switch, TIMER-recordings are impossible! y y Standby/on: To switch TVCR On or Off or to interrupt a menu function. + – 5 5 Volume: In connection with the button , to adjust the volume. The control lights at the front of machine P
ページ5に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 1 OPERATING INSTRUCTIONS These operating instructions have been Thank you for buying a Philips TV-Video combi. printed on non-polluting paper. This TV-Video combi is one of the most sophisti- cated and easy-to-use TV-Video combi on the Deposit old batteries at the appropriate col- lection points. market. Please take the time to read this operat- ing manual before using your TV-Video combi. It Please make use of the facilities available in your country for d
ページ6に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 3 1. Connecting the TV-Video Combi 1. 1.Take the remote control and the enclosed Important for the United Kingdom batteries (2 batteries). 2.Open the remote control's battery compart- 2. This apparatus is fitted with an approved 5 Amp plug. ment and place the batteries in it as shown in To change a fuse in this type of plug proceed as fol- the picture and close the battery compart- lows: ment. 1. 1.Remove fuse cover and fuse. The remote control is now ready
ページ7に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 4 2. Important notes for operation Switching on You can switch TV-Video Combi on with STANDBY/ON y y . Power outage/no power Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute. Navigation in the screen menu You can check/change many functions and set- tings of your TV-Video Combi via on-screen menu. The individual functions are selected, via the remote control as follows: MENU Call up the menu:with
ページ8に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 5 3. Installing your TV-Video Combi Preparation for use Decoder allocation Some TV channels transmit encoded TV signals 1.After you have connected the aerial or cable, 1. which can only be viewed with a commercially confirm the picture on the TV screen with purchased or rented decoder without distur- B1 . bances. You can connect such a decoder to this Connecting additional devices TV-Video Combi. The following function will auto- After you have connected add
ページ9に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 6 Manual TV channel search Using the satellite receiver In some cases it could occur that all of the TV You can receive channels from the satellite channels were not found and saved during the AV1/EXT1 receiver via the scart socket . Preparation for use. In this case, the missing or To do this, select the channel number 'AV1' by coded TV channels must be searched for and 0..9 pressing 0,0,1, with the keys on the remote stored manually. control.You will have
ページ10に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 7 Sorting and clearing TV channels Setting the clock manually If the display shows an incorrect time or ' --:-- ' the time and date must be reset manually. You can use this function to individually sort the MENU 1. 1.Press . The main menu will appear. TV channels already saved or to delete unwant- ed TV channels or those with poor reception. KB LC 2.Select 'GENERAL SET UP' with 2. The clock resets automatically B1 and confirm with . If you save a TV channel
ページ11に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 8 4. TV SET FUNCTIONS . KB 3.Select an item using LC , and then 3. Selecting a TV channel B1 modify with s0 . 4.To end, press STATUS/EXIT . Select the desired TV channel (= the programme 4. P+ P- 0..9 number) with , or with on the SELECT KL ADJUSTE s/ B remote control. BRIGHTNESS < > CONTRAST < > COLOUR < > Selection of the scart socket SHARPNESS < > TINT <
ページ12に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 9 Changing the picture setting with If you would like to turn this function off, press SLEEP SMART Picture on the remote control several times until switch-off appears. '--:--' will appear on the You can change the picture setting during play- screen. back. SLEEP To check the time until switch-off, press SMART PICTURE 1. 1.Press to show the current pic- on the remote control. ture setting. If a recording is in process, switch-off function 2.Press SMART PICT
ページ13に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 10 5. Playback Playing cassettes Playing back NTSC cassettes You can use this TV-Video Combi to playback Cassettes that have been recorded in the NTSC recorded VHS video cassettes. You can operate standard (for example, American cassettes) can the TV-Video Combi using the remote control or be played back using this TV-Video Combi. the buttons on the set. Your TV-Video Combi can only record and play Displaying current tape position standard VHS cassettes. 1.
ページ14に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 11 Searching for a tape position with Manual Tracking picture (scanning) To adjust the tracking manually, press P+ or P- . on the TV/VCR during playback 1.While a cassette is playing, press s0 1. Tracking returns to Automatic Tracking B1 (reverse) or (forward) one or more LC Adjustment when you press or insert a times. tape. KB 2. 2.Press to resume playback. Still picture 2 1.During playback, press STILL to stop the 1. tape and display a still picture. KB 2.
ページ15に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 12 6. Manual recording General information Recording with automatic switch-off (OTR One-Touch-Recording) Use 'Manual Recording' to make a sponta- neous recording (for example, a programme cur- 1.Insert a cassette. 1. rently being shown). P+ P- 2.Use or 0..9 to select the pro- 2. If you want to start and stop a recording manual- gramme number you want to record. ly, read the section 'Recording without auto- RECORD/OTR I 3.Press . 3. matic switch-off'. 4.Each
ページ16に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 13 Selecting the recording speed (SP Automatic controlled recording from or LP) a satellite receiver (RECORD LINK) LP allows to double the recording duration on tape This function automatically starts recording on the (for example six hours instead of three hours on a switched-off TV-Video Combi when a video signal is E180 cassette). recognised through the connected scart cable. If your satellite receiver has a programming function, 1.Press MENU . The main
ページ17に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 14 7. Programming a recording (TIMER) 3. 3.Enter the entire PlusCode number. This is up General information to 9 digits long and can be found next to the start time of the TV programme in your TV Use a TIMER programming to automatically start listing magazine. [e.g:1-234-5 or 1 234 5] and stop a recording at a later time or date. The If you make a mistake, you can clear your TV-Video Combi will switch to the right pro- CLEAR input with . gramme number and be
ページ18に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 15 6 6The decoded data appears after confirmation. Programming a recording (without You can go back to change the data. Select the B1 corresponding input field using CLEAR . + or VIDEO Plus system) 0..9 Change the data with . 1. 1.Press MENU . The main menu will appear. 7.When all input data are correct, press 7. KB LC 2. 2.Select 'TIMER' with . Then press STATUS/EXIT . The programming is stored in a B1 . TIMER block. 3. 3.Select ONCE, DAILY, or WEEKLY reco
ページ19に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 16 How to check, change or delete a programmed recording (TIMER) 1. 1.Press MENU . The main menu will appear. KB LC 2. 2.Select 'TIMER' with . Then press B1 . KB LC 3. 3.Select 'TIMER LIST' with , and B1 confirm with . SELECT KL CHOOSE B ONCE DAILY WEEKLY →TIMER LIST END=EXIT B1 4. 4.Select timer block with . 5.To cancel the recording, press CLEAR . 5. 6.To end, press STATUS/EXIT 6. . How to change a programmed recording (TIMER) 1.Press MENU . The main menu
ページ20に含まれる内容の要旨
PAL I(EN).qx3 02.4.2 6:42 PM Page 17 8. Other functions B1 4. 4.Select function 'ON' with . Switching the status display off or If you select 'OFF', continuous playback will be on switched off. STATUS/EXIT 5. 5.To end, press . Along with the on screen menu, the status dis- 6. 6.Insert a cassette. play also displays information on the current KB 7. 7.Start the continuous playback with operating status (counter, playback, recording, . TV channel, etc.) on the TV screen. 1.Press MENU . The mai
