ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Safety ................................................................. GB2 Copyright & Glossary ......................................... GB3 Reference ........................................................... GB4 STB Connections ................................................ GB5 ~ GB8 Remote Control Unit ........................................... GB9 ~ GB10 Guide of Functions ............................................. GB11 ~ GB13 Guide of Main Menu ...........................
ページ3に含まれる内容の要旨
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 90 - 250V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus. CLEANING : Disconnect the STB from the wall outlet befo
ページ4に含まれる内容の要旨
Copyright & Glossary CAUTION To watch Pay Per View programmes, be sure to inform your STB dealer of the STB’s and Smart card’s serial numbers. So that they can pair your STB with your Smart card. Otherwise, you cannot watch the programmes because they are scrambled. NOTE When the changed Network Information is sent, Nagravision realizes that the appropriate satellite/cable service information has been changed. And it will re-organize the service information based on the sent Network Info
ページ5に含まれる内容の要旨
Reference 1. Loop Through If you have another analogue or digital STB and you wish to use the same RF Signal then you can connect it via the loop through. Connect one end of a RF cable to the TV/VCR on the STB and connect the other end to the RF(ANT) on your second STB. 2. Software Upgrade HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications. Whenever a problem is found with this software or, in fact, extra functions or enhanced app
ページ6に含まれる内容の要旨
STB Connections Front Panel F1-4000T Free-To-Air NA-4710T 1 Smart card STANDBY 1 Press to switch between Operation and Standby modes. 2 TV/RADIO Press to switch between TV and Radio modes. - p + 3 Use to change services down/up. - v + 3 Use to change volume down/up. STANDBY LED(RED) 5 Indicates that the STB is under standby. 6 TV LED(AMBER) The LED lights on in TV mode. 7 RADIO LED(GREEN) The LED lights on in RADIO mode. 8 DISPLAY Shows service number, error messages, RCU commands and ti
ページ7に含まれる内容の要旨
Rear Panel 1 TV SCART For the audio/video input of the TV. 2 VCR SCART For the VCR. 3 AUDIO/VIDEO OUTPUT Audio/video signal from your STB to VCR or TV. 4 ANTENNA Use to connect a general Aerial Antenna and CABLE jacks to a ANTENNA input jack on the STB. 4 TV/VCR Use to connect a RF signal from your STB to RF(ANT) input jack on your TV or VCR . 4 RS-232C Use it when connecting to your PC. GB6
ページ8に含まれる内容の要旨
STB Connections Example 1 In this example a TV set is connected to the digital receiver. If possible the TV should be connected with the digital receiver through a Scart cable. If the TV doesn’t have a Scart connection or if you want to connect a second TV to the digital receiver, the UHF output of the modulator may be used. Example 2 In example 2 a VCR and a hifi stereo components system are connected to the digital receiver in addition to the TV. The VCR should be connected through a Scart
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
Remote Control Unit GB9
ページ11に含まれる内容の要旨
NUMERIC BUTTONS TV/DTV 1 10 Press to select a service, enter your PIN Code or Press to select the TV/DTV mode. numeric on the menu. 11 TV/RADIO INFORMATION (RED) 2 Press to select the TV/RADIO mode. Press to display the programme information box on the screen. And this button functions same as 12 MUTE the RED button on the menus. Press to temporarily cut off the sound. SOUNDTRACK (GREEN) 3 13 MENU Press to display the soundtrack list for the current Press to display the Main Menu on the screen
ページ12に含まれる内容の要旨
Guide of Functions Information Box (I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part. SERVICE-PART (Left side of the box) SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol • Service name, Service number, icons • Subtitle, Teletext, Scrambling service symbol (These are automatically displ
ページ13に含まれる内容の要旨
Changing Services To change services, do in the following sequence; 1. Press the NUMERIC buttons(0~9) on the remote control unit. 2. Press the buttons or buttons. Or press the RECALL( ), Service-list( ), EPG( )mode button. To switch between TV and Radio services, press the TV/Radio ( ) button. To select the previous viewed Service, press the RECALL( ) button. Volume Control To adjust the volume level, use the buttons or buttons. To temporar
ページ14に含まれる内容の要旨
Guide of Functions Subtitle When the current broadcasting programme provides subtitle, press the SUBTITLE( )button to see the current subtitle language list. To change the subtitle language: 1. Use the buttons to select a Subtitle language you want. 2. Press the button and the selected language is highlighted and then the Subtitle Language you want is displayed on the screen. Press the button to cancel the Subtitle mode. Teletext Use your TV Remote Control Unit t
ページ15に含まれる内容の要旨
Guide of Main Menu 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. 2. TV Guide Your STB has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services. In ad
ページ16に含まれる内容の要旨
Guide of Main Menu 1. Select Service To select the desired in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: Simple Service List 1. Use the buttons to select “Select Service” from the Main Menu and press the button. 2. Use the buttons to select “Sim
ページ17に含まれる内容の要旨
Service Favourite Service Favourite 1. Press the GREEN( )button on the remote control unit to select the Favourite service list. Note : The groups are labeled in four different alphabet characters (A,B,C,D). 2. Use the buttons to select a favourite group that you want. 3. Press the GREEN( )button to toggle group and service list. Service Network 1. Press the YELLOW( )button on the remote control unit to select the Network service list. 2. Use the button
ページ18に含まれる内容の要旨
Guide of Main Menu 2. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • RED ( )button : Use to displa
ページ19に含まれる内容の要旨
Weekly mode Shows the information of programmes that will be played for a week. Select a day you want using the buttons. To watch and reserve a programme you want, do the same steps with the Now/Next mode. Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name. To cancel the Reserved service, s
ページ20に含まれる内容の要旨
Guide of Main Menu 3. Parental Control You can set a parental guidance rating to each programme in this mode. 1. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. 0000 ** The default PIN code is . 2. Enter the PIN code on the display window. (If any problem occurs when entering a PIN code, you cannot switch to the next mode.) 3. Set the parental
