JL Audio Stealthbox SB-F-MUCUPE2/13W3v3の取扱説明書

ページ1に含まれる内容の要旨

SB-F-MUCUPE2/13W3v3 INSTR_SKU# 011004
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the force exerted by the woofer(s).
SB-F-MU

ページ2に含まれる内容の要旨

SB-F-MUCUPE2/13W3v3 INSTR_SKU# 011004 s t e P 4 S T E P 7 Push the enclosure back into the side until it is snug in place, Set the enclosure into the trunk on the passenger side of Mark the spot where the bracket lines up with seat brace the car, familiarize yourself with the location of the threaded insert at the front top of the enclosure. Rotate the enclosure structure, drill a 1/2” hole. into place. Before drilling, always make sure that you are not going to be drilling into any gas

ページ3に含まれる内容の要旨

SB-F-MUCUPE2/13W3v3 INSTR_SKU# 011004 I n C l u d e d H a R d W a R e 3) 3/8-16x1-1/4” Hex Head Bolt 3) 3/8x1-1/4” Fender Washer 3) 3/8” Split Lock Washer 1) Custom Bracket 1) 3/8x16 Locking Nut s P e C I F I C a t I o n s Enclosure Type: Acoustic Suspension (sealed) Driver Type: 13W3v3-4 Nominal Impedance: 4 ohms Continuous Power Handling: 600 watts P o W e R R e C o m m e n d a t I o n JL Audio recommends high quality amplifiers such as the JL Audio HD900/5, 500/1v2 or J2 500.1. The di