ページ1に含まれる内容の要旨
ZR800-CW
Subwoofer
owner’s manual
Thank you for choosing a JL Audio Evolution ZR Component Woofer for your
automotive sound system. With proper installation, your new speaker
will deliver years of listening pleasure.
We strongly recommend that you have your new Evolution speaker installed
by your authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble your interior panels,
install your new speakers and reassem
ページ2に含まれる内容の要旨
ZR800-CW SPECIFICATIONS B Cast Alloy Frame D (U.S. Patent #6,219,431 & #6,229,902) Elevated Frame Cooling DMA-Optimized Motor System E A F Mineral-Filled Polypropylene Cone Santoprene Surround 1.75-in. / 44 mm Voice Coil C Kapton® Former Progressive Roll Spider Woofer Physical Dimensions Ferrite Magnet Frame Outer Diameter (A) 8.26 in. / 209.8 mm Precision-Built in Miramar, Florida - USA Grille Tray Outer Diameter (B) 8.49 in. / 215.6 mm Magnet Outer Diameter (C) 4.54 in. / 115.3 mm Continuous
ページ3に含まれる内容の要旨
APPLICATION INFORMATION The ZR800-CW is a powerful 8-inch Infinite Baffle: component woofer designed to operate As a dedicated mid-bass speaker operating in automotive sound systems reproducing above 50 Hz (with active filtering) the the frequency range between 30 Hz ZR800-CW can be safely operated at and 400 Hz. It can be used in infinite- power levels momentarily exceeding 200 baffle or enclosed applications as an watts per woofer. When operating below extremely potent, dedicated mid- 50
ページ4に含まれる内容の要旨
GETTING STARTED SPEAKER INSTALLATION • T urn off the audio system. It is also Run speaker wire to the desired mounting a pilot hole in the center of the speaker advisable to disconnect the negative location. If you are running wires into a door, mounting hole at this time. Then, using a (–) terminal of your vehicle’s battery use existing factory wiring boots whenever saber saw, make the circular cut out for the whenever performing installation work. possible. If you are drilling new holes,
ページ5に含まれる内容の要旨
Diagram A: Typical Woofer Installation JL AUDIO ZR800-CW 5
ページ6に含まれる内容の要旨
ENCLOSURE SPECIFICATIONS Driver Recommended Sealed Design Volume External Dimensions F3 Fc Qtc (net int.) (Width x Height x Depth) (Hz) (Hz) 0.750 ft3 15.5 in. x 12 in. x 10.5 in. ZR800-CW 60 80.73 1.155 21.2 litres 394 mm x 305 mm x 267 mm Sealed Design Ported Design Driver Recommended Ported Design Volume Enclosure External Dimensions Round Port Specs Tune to: F3 (net int.) (Width x Height x Depth) (Inner Diameter x Length) (Hz) (Hz) 1.125 ft3 18 in. x 15 in. x 10.5 in. 2 in. x 5 in. ZR800-CW
ページ7に含まれる内容の要旨
RECOMMENDED CONTINUOUS (RMS) POWER RANGE FOR ONE COMPONENT WOOFER: MEDIUM GRAY (MINIMUM): LIGHT GRAY (OPTIMUM): DARK GRAY (MAXIMUM): BLACK (WARRANTY VOID): From a reliability standpoint, this zone This zone represents the best Slightly more SPL will be gained by We do not recommend operating represents a very comfortable operating compromise between long-term pushing the power into this zone, but woofers at this level of power. In this power range for each driver. This level reliability, high
ページ8に含まれる内容の要旨
LIMITED WARRANTY - (USA) AUTOMOTIVE SPEAKER SYSTEMS JL AUDIO warrants this speaker to be free of defects in materials Any applicable implied warranties are limited in duration to the and workmanship for a period of one (1) year from the original date period of the express warranty as provided herein beginning with of purchase. the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some Damage caused by the followin
