ページ1に含まれる内容の要旨
OWNER’S MANUAL
COMBINATION 20” FLAT COLOR TELEVISION
AND VIDEO CASSETTE / DVD VIDEO PLAYER
MVDT2002A
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer
for the required programming code.
TV/CABLE MODE SELECTION
When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable Television) mode.
If not using CABLE, set this menu option to the “TV” position.
Before operating the unit, please read this manual thoro
ページ2に含まれる内容の要旨
The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence RISK OF ELECTRIC SHOCK of uninsulated dangerous voltage within DO NOT OPEN the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral SHOCK, DO NOT REMOVE COVER (OR triangle is intended to alert the user to BACK). NO USER-SERVICEABLE
ページ3に含まれる内容の要旨
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners
ページ4に含まれる内容の要旨
IMPORTANT SAFEGUARDS (continued) 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines
ページ5に含まれる内容の要旨
IMPORTANT SAFEGUARDS (continued) 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 27. NOTE TO CABLE TV SYSTEM INSTALLER This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that prov
ページ6に含まれる内容の要旨
Features Color TV with DVD/CD Player/Video Cassette Recorder • Color TV with DVD/CD player with Video Cassette Recorder - Unique space saving design combines a color TV, a DVD/CD player and a Hi-Fi Video cassette recorder. A DVD disc has much more capacity, but is the same size as an audio CD disc. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD PLAYER can play back audio CDs. • High Quality Picture - More than 400 lines (VCR mo
ページ7に含まれる内容の要旨
Contents Before using your unit Disc playback operation IMPORTANT SAFEGUARDS ..........................3 Disc ................................................................ 42 Power source ...................................................5 Preparation..................................................... 43 Features ........................................................... 6 Status display of disc ..................................... 43 Contents ............................................
ページ8に含まれる内容の要旨
Parts and functions Front Disc tray Cassette loading slot Skip buttons (DVD) Stop/ Rew Eject Play F.Fwd Rec/Otr Channel Power Rec/Otr T.Rec Open/Close Volume Skip Stop Play Skip Power (Mono) Phones Video In L – Audio In – R Phones jack Power button Video In jack Play button (DVD) Audio In (L/R) jacks Stop button (DVD) Rew (Rewind) button (VCR) Volume ▲/▼ buttons Stop/Eject button (VCR) Open/Close button (DVD) Play button (VCR) T.Rec indicator (VCR) F.Fwd button (VCR) Rec/Otr indicator (VCR) Rec/
ページ9に含まれる内容の要旨
Remote control Page POWER Power on/off 10,15,16,19,43,44 TV/VCR Press to operate TV/VCR 10,15,33,35,36,38,39 DVD Press to operate DVD 10,38,43,44,52~56 CH +/– Select channel 10,20,36,38 0-9 Direct channel selection of TV 10,19,23,36,38 Input setting 46,47,49 Enter a password 24,26,55~57 VOL +/– Adjust volume of TV 19,20 MUTE Switch off the sound 20 DISPLAY/CALL Display TV/VCR or DVD operation status 16,20,25,34,35,37,39,43 JUMP Locating desired scene 47 QUICK VIEW Switch between present/last cha
ページ10に含まれる内容の要旨
Remote control (continued) Inserting Batteries Install two “AAA” batteries (not Replace the compartment Open the battery 12 3 paying attention to the compartment cover in the supplied), cover. direction of the arrow. polarity diagram in the battery compartment. Battery precautions The precautions below should be followed when using batteries in this device: 1.Use only the size and type of batteries specified. 2.Be sure to follow the correct polarity
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service (CABLE), see page 12 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the RF IN jack. RF IN RF IN If your combination VHF/UHF antenna has a 300 jack jack ohm twin-lead wire, the use of the 300-75 ohm matching
ページ12に含まれる内容の要旨
Cable TV connections This unit has an extended tuning range and can tune most Cable TV channels without using a Cable TV Converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. For subscribers to basic to basic Cable TV service For basic Cable TV service not requiring a Converter/ RF IN Descrambler box, connect t
ページ13に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround sound as follows, you can enjoy the various audio systems including Dolby Digital Surround a
ページ14に含まれる内容の要旨
Connections to other equipment (continued) Using the audio/video inputs If you connect the unit to camcorder or TV game, you can select by pressing INPUT SELECT. Press INPUT SELECT repeatedly to select the desired mode. LINE “LINE” or TV channel will display on the screen for 4 seconds. TV Channel LINE (Front) NOTE: In the DVD mode this key will not operate. 1. To connect the unit to a camcorder To playback from a camcorder, connect the camcorder to the unit as shown. Camcorder Front of unit (Mo
ページ15に含まれる内容の要旨
Setting the on screen display language You can choose from three different Press POWER to turn on the unit. 1 languages (English, Spanish and French) for the on-screen displays. Press TV/VCR to select the TV/VCR mode. 2 Press SETUP/TV MENU. Press 3 CH or to select option. Press or to select 4 CH “LANGUAGE”, then press . Press or to select the 5 CH des
ページ16に含まれる内容の要旨
Auto clock setting The Auto clock function will automati- Auto clock setting cally set the built-in clock (Month, Day, Year and Time) when the unit is Connect the Antenna or Cable system. 1 connected to an Antenna or Cable TV • If you use a cable box, turn it on. system and it is turned off. As the unit searches for a receivable station in Plug the AC Power cord to the AC outlet. 2 your area and it receives a broadcast signal for Auto clock, the Auto clock Make sure the unit is turned off. 3 nee
ページ17に含まれる内容の要旨
Auto clock setting (continued) To set standard time In the rare event that you live within broadcast range of two stations in two different time zones, the unit may recognize the wrong station for the Auto clock set. To correct the situation: Press SETUP/TV MENU in the TV/VCR mode. 1 The TV/VCR menu screen will appear. Press or to select option. 2 Press or to select “STANDARD TIME”, then press . 3 Press or to select your time zone, then press ENTER. 4 ATLANTIC : GMT – 4 hours (GMT: Gre
ページ18に含まれる内容の要旨
Manual clock setting You must set the date and time EXAMPLE: Setting the clock to “8:30 AM” March, 25 (SAT), 2006. manually for Timer Recordings, ON/ Press SETUP/TV MENU in the TV/VCR mode. OFF Timer and Daylight Saving Time 1 if the Auto clock process did not set The TV/VCR menu screen will appear. them correctly. Press or to select the 2 CH option. CLOCK SET ON/OFF TIMER AUTO CLOCK
ON STANDARD TIME DAYLIGHT
SAVING TIME // // MENU Press or to select the 3 CH “CLOCK SET” option, then pre
ページ19に含まれる内容の要旨
TV operation To turn on the unit, press POWER. 1 Adjust the volume level by 2 pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. Set the TV/CABLE menu 3 TV - VHF/UHF channels option to the appropriate CABLE - Cable TV channels position. (See page 22.) Press the Direct Channel 4 Selection buttons to select the cha
ページ20に含まれる内容の要旨
TV operation (continued) CHANNEL +/– Press and release CH + or –. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 22 and 23 “Memorizing channels”. CALL Press DISPLAY/CALL to display the TV/VCR 8 : 47AM MON CH 125 current information on the screen. STEREO SAP Press DISPLAY/CALL again to clear the call display. • Channel number or VIDEO mode 00 : 00 : 00 SP • Stereo or SAP (se
