ページ1に含まれる内容の要旨
OWNER’S
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
MANUAL
COLOR TV/DVD
EWC20D5 A (20 inch)
SUPPLIED ACCESSORIES
Remote Control Unit Batteries Owner’s Manual
Owner's Manual
INSTRUCCIONES
EN ESPAÑOL INCLUIDAS.
NE221UD 2 AA Batteries 1EMN20223
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at http://www.emersonaudiovideo.com
Ple
ページ2に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DAN- CAUTION GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT RISK OF ELECTRIC SHOCK WITHIN THIS UNIT. DO NOT OPEN THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). NO MAINTENANCE INSTRUCTIONS IN THE USER SERVICEABLE PARTS INSIDE. REFER SER- LITERATURE ACCOMPANY
ページ3に含まれる内容の要旨
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRI C SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 12.Power-Cord Protection-Power-supply cords should be 19.Damage Requiring Service-Unplug this unit from the wall routed so that they are not likely to be walked on or
ページ4に含まれる内容の要旨
PRECAUTIONS LASER SAFETY IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public This unit employs a laser. Only a qualified service performance and lending of discs are prohibited. person should remove the cover or attempt to ser- This product incorporates copyright protection vice this device, due to possible eye injury. technology that is protected by U.S. patents and other intellectual property rights. Use of this CAUTION: USE OF CONTROLS OR ADJUST- copyright protection te
ページ5に含まれる内容の要旨
LOCATION SYMBOLS USED IN THIS MANUAL The following symbols below appear in some head- For safe operation and satisfactory performance of ings and notes in this manual, with the following your unit, keep the following in mind when selecting meanings a place for its installation: Shield it from direct sunlight and keep it away from • TV sources of intense heat. : Description refers to TV operation (in the TV mode). Avoid dusty or humid places. • DVD-V Avoid places with insufficient ventilation for
ページ6に含まれる内容の要旨
TABLE OF CONTENTS FAST FORWARD / FAST REVERSE . . . . . . .21 C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 SLOW FORWARD / SLOW REVERSE . . . . .21 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5 TITLE / CHAP
ページ7に含まれる内容の要旨
FEATURES TV Mode DVD Mode ¡Dolby Digital sound 181 channel capability PLL frequency synthesiz- • This unit can handle Dolby Digital surround sound er tuner with direct station call having 5.1 channels when connected to a Dolby Digital (A converter may be necessary to view scrambled cable decoder. channels.) ¡Still/fast/slow/step playback Infrared remote control • Various playback modes are available including still pic- Trilingual on screen menu display selectable in • tures, fast forward/reve
ページ8に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS [Fig. 1] FRONT PANEL OPEN/ POWER VOLUME CHANNEL STOP SKIP PLAY SKIP PAUSE CLOSE VIDEO L–AUDIO–R – SEARCH – HEADPHONE 128 3 4 5 6 7910111213 14 7. Remote Sensor Window [Fig. 2] REMOTE CONTROL 8. STOP C Button [page 21] Stops operation of the disc. 9.SKIP H Button [page 22] Plays back from the beginning of the current OPEN/ chapter or track. POWER PICTURE SELECT CLOSE 4 13 SEARCH h Button (Front Panel) 34 36 [page 21] 123 During playback or in the pause mode, pres
ページ9に含まれる内容の要旨
[Fig. 3] REAR VIEW ANT. COAXIAL 37 38 39 17. SLEEP Button [page 16] 32. K / L / { / B Buttons Hit to display the sleep timer and start the function. TV Mode: [page 13] The shut off time can be determined by the number Hit to select a setting mode from the menu on the of times you hit this button. (0, 30, 60, 90 or 120 TV screen. minutes) Hit to select or adjust from a particular menu. 18. REV h Button [page 21] DVD Mode: [page 20] Hit to fast reverse the Disc. Hit [PAUSE F], then Press to select
ページ10に含まれる内容の要旨
OUT IN PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or VHF/UHF Antenna From Cable System or Cable Box (Not supplied) Satellite Dish (Not supplied) VHF Antenna (Not supplied) UHF Antenna From (Not supplied) Cable System ANT. COAXIAL VHF/UHF Combiner or (Not supplied) ANT. or 75-ohm Coaxial Cable (Not supplied) Flat twin-lead cable [Fig. 4] or Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro
ページ11に含まれる内容の要旨
CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on another [Front of the unit] source (VCR or video camera), use the audio/video input jacks on the front of the unit. To the [Another source] audio out- Connect the audio/video output put jacks jacks of another source to the AUX AUDIO L/R and VIDEO jacks of this unit. Then hit [SELECT] until "AUX" appears on the screen. VIDEO L–AUDIO–R To the video NOTE: output jack When you connect a monaural VCR (another • source) to this un
ページ12に含まれる内容の要旨
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections. Center speaker ANT.
ページ13に含まれる内容の要旨
TV SECTION SET UP FOR USE SELECTING THE LANGUAGE CHANNEL SET UP TV TV You can program the tuner to scan all the channels 1 Plug in the unit power cord you receive in your area. Plug the unit power cord into a standard NOTE: Channel memory programming is NOT AC outlet. needed when connected to a cable box or satellite NOTE: box. Just select the unit channel selector to the output If any digits appear in the corner of • channel of the cable box or satellite box (Ex CH3), the screen, hit [POWER] wi
ページ14に含まれる内容の要旨
DELETING (OR ADDING) CHANNEL(S) TV The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) 1 Select “CHANNEL SET UP” - TV SETUP - Hit [SETUP] on the remote control. Press [K K / L L] to point to “CHAN- B CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] NEL SET UP”. CAPTION [OFF] Then hit [ENTER]. – CHANNEL SET UP – 2 Select “ADD/DELETE CH” B ADD / DELETE CH (CATV) Press [K K / L L] to point to AUTO
ページ15に含まれる内容の要旨
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV TV 1 Turn on the unit The unit’s picture controls – BRIGHT, CON- Hit [POWER] to turn on the unit. TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further 2 Select the channel number adjustments for a more natural looking image. Press [CH. K K/L L] to select your desired channel num- Make sure ... ber or press the number buttons. unit power must be turned on
ページ16に含まれる内容の要旨
NOTE: SLEEP TIMER If the unit displays a black box on the TV screen, this means that the TV unit is set to the TEXT mode. To clear screen, select [CAPTION1], The Sleep Timer function enables you to shut off the power [CAPTION2] or [OFF]. without hitting [POWER] after a desired time period. Make sure ... 1 Set “SLEEP TIMER” unit power must be turned on. • Hit [SLEEP] on the remote control. You may change the sleep time with hitting [SLEEP] repeatedly. 1 Select “CAPTION” The timer is set up to 120
ページ17に含まれる内容の要旨
Selection Rating Category Explanations V-CHIP SET UP TV-Y Appropriate for all children TV TV-Y7 Appropriate for children seven and older TV-G General Audience V-CHIP enables parents to prevent their children TV-PG Parental Guidance suggested. from watching inappropriate material on TV. TV-14 Unsuitable for children under 14 V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on TV-MA Mature audience only premium cable channels and Emergency Broadcast NO
ページ18に含まれる内容の要旨
CHANGE ACCESS CODE MPAA RATING SET UP B C Follow steps to in the “V-CHIP SET UP” section Follow steps to in the “V-CHIP SET UP” sec- 1 3 1 3 on page 17. tion on page 17. 4 Select your desired item 4 Enter New code G [VIEW] NEW CODE Press [K / L] to point to your Press the Number buttons to PG [VIEW] PG–13 [VIEW] _ _ _ _ B R [BLOCK] desired item, then hit [ENTER] to enter your desired access code in NC–17 [BLOCK] X [BLOCK] CONFIRM CODE select [BLOCK] or [VIEW]. the “NEW CODE” space, then _ _
ページ19に含まれる内容の要旨
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Recorded Playable Disc size Mark (logo) Region code Disc types discs signals DVD-Video or * 1,2,3,10 Example 12 cm Title 1 Title 2 Digital video DVD-RW or Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 DVD-R (MPEG2) - 8cm * 1,3,4,5,6 8,9 DVD+RW DVD+R - * 1,3,4,5,7,8,9 Audio CD * 3,5 Audio CD Example 12 cm - Digital audio or Track 1 Track 2 Track 5 Track 6 Track 3 Track 4 CD-RW 8cm CD-R * 3,4,5,8,9 is a trademark of DVD Format/Logo Licensing
ページ20に含まれる内容の要旨
PLAYING A DISC BASIC PLAYBACK GENERAL FEATURES DVD-V CD DVD-V DVD may contain menus to navigate the disc and access Getting started special features. Press appropriate the number buttons ¡Turn on the power of amplifier and any other com- or [K K/L L/s s/B B] to highlight your selection in the DVD ponents, if necessary. main menu and hit [ENTER] to confirm. 1 Hit [POWER]. NOTES: ¡The power will turn on. ¡Select DVD mode by hitting [SELECT] on the remote control. Then hit [PLAY O O] or 2 Hit
