ページ1に含まれる内容の要旨
OWNER’S
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
MANUAL
9-INCH COLOR TV/DVD
EWC09D5
EWC09D5 B
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at http://www.EmersonAudioVideo.com
Please read before using this equipment
ページ2に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE RISK OF ELECTRIC SHOCK CONSTITUTING A RISK OF ELECTRIC DO NOT OPEN SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). NO MAINTENANCE INSTRUCTIONS IN THE USER SERVICEABLE PARTS INSIDE. REFER LITERATURE ACCOMPANYING THE S
ページ3に含まれる内容の要旨
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRI C SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 12.Power-Cord Protection-Power-supply cords should be 19.Damage Requiring Service-Unplug this unit from the wall routed so that they are not likely to be walked on or
ページ4に含まれる内容の要旨
PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION LASER SAFETY Unauthorized copying, broadcasting, public perfor- This unit employs a laser. Only a qualified service mance and lending of discs are prohibited. person should remove the cover or attempt to ser- This product incorporates copyright protection tech- vice this device, due to possible eye injury. nology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by C
ページ5に含まれる内容の要旨
LOCATION WARNING For safe operation and satisfactory performance of Moisture condensation may occur inside the unit your unit, keep the following in mind when selecting when it is moved from a cold place to a warm place a place for its installation: or after heating a cold room or under conditions of high humidity. If a DVD is played in a unit which has Shield it from direct sunlight and keep it away from • moisture, it may damage the DVD and the unit. sources of intense heat. Therefore when the
ページ6に含まれる内容の要旨
TABLE OF CONTENTS STEP BY STEP PLAYBACK . . . . . . . . . . . . .20 C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 FAST FORWARD / FAST REVERSE . . . . . . .20 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 SLOW FORWARD / SLOW REVERSE . . . . .20 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21 SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5 TRACK SEARCH . . . .
ページ7に含まれる内容の要旨
FEATURES ¡Screen saver/Auto power-off functions TV Mode The screen saver program starts when there is no input from the unit for 5 minutes in the stop mode. After the 181 channel capability PLL frequency synthesiz- • screen saver program is activated for 15 minutes, the er tuner with direct station call power automatically turns off. (A converter may be necessary to view scrambled ¡Subtitles in a desired language cable channels.) You can select a desired language for the display subtitles, Infr
ページ8に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS [Fig. 1] FRONT PANEL [Fig. 3] REAR VIEW DC 13.2V ANT. VIDEO L AUDIO R POWER VOLUME CHANNEL STOP SKIP PLAY SKIP PAUSE OPEN/CLOSE HEADPHONE COAXIAL SEARCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 37 38 39 40 7.Remote Sensor Window 8. C STOP Button [page 19] Stops operation of the disc. [Fig. 2] REMOTE CONTROL 9. H SKIP Button [page 21] Plays back from the beginning of the current chapter or track. OPEN/ POWER PICTURE SELECT CLOSE E SEARCH Button (Front Panel) 4 13 [page
ページ9に含まれる内容の要旨
30. RETURN Button [page 21, 24] 17. SLEEP Button [page 15] Returns to the previous screen in the setup menu. Sets the sleep timer. 18. REV h Button [page 20] 31. ENTER Button [pages 14, 19] Hit to fast reverse the Disc. Hit [PAUSE F], then hit Hit to accept a setting. this button to begin slow motion playback. Hit this 32. K / L / s / B Buttons button repeatedly to change the reverse speed of slow TV Mode: [page 14] motion. Press to select a setting mode from the menu on FWD g Button [page 20] t
ページ10に含まれる内容の要旨
PREPARATION FOR USE ANTENNA/CABLE CONNECTION Cables used here are commercially available. [ANTENNA CONNECTION] [CATV/SATELLITE CONNECTION] CATV Box or Satellite Box * VHF/UHF 75-ohm Coaxial Cable OR DC 13.2V VHF OUT IN ANT. COAXIAL From Cable System or UHF Satellite Antenna VHF/UHF 75-ohm Combiner ANT. OR Coaxial Cable From Cable System VHF VHF Adaptor or or UHF UHF [Fig. 4] Flat twin- *Some cable TV systems use scrambled signals and lead cable require a special converter to receive these chan
ページ11に含まれる内容の要旨
CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the AUX AUDIO/VIDEO input jacks on the front of the unit. Connect the AUDIO/VIDEO output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit. Then hit [SELECT] until “AUX” appears on the screen. VIDEO L AUDIO R POWER ex. VCR or video camera, etc. To the Audio output jacks (OUT) Audio Cable (IN) (commercially available) VIDEO L AUDIO R To the Vide
ページ12に含まれる内容の要旨
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS (for DVD) Use an audio coaxial digital cable (commercially available) for the audio connections. Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. ex. MD deck, DAT deck, etc. DC 13.2V To Coaxial digital ANT. Audio input jack COAXIAL COAXIAL (IN) Audio coaxial digital cable (OUT) (commercially available) To COAXIAL jack (Only DVD AUDIO OUT) [Fig. 7] NOTES: The audio source on a disc in a 5.1
ページ13に含まれる内容の要旨
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables (commercially available) for the audio connections. Center speaker Front speaker Fr
ページ14に含まれる内容の要旨
TV SECTION TV OPERATION AND SETTINGS SET UP FOR THE WATCHING A TV PROGRAM FIRST TIME TV TV 1 Turn on the unit 1 Plug in the unit power cord Hit [POWER] to turn on the unit. Plug the unit power cord into a standard AC outlet. 2 Select the channel number NOTE: Press [CH. K / L] to select your desired channel If some digits appear in the corner of • number or press the Number buttons. the screen, hit [POWER] without Note for using the Number buttons: unplugging the power cord. ¡When selecting cabl
ページ15に含まれる内容の要旨
PICTURE CONTROL SLEEP TIMER TV TV The unit’s picture controls – BRIGHT, CON- The Sleep Timer function turns off the unit without TRAST, COLOR, TINT and SHARPNESS – are using [POWER] after a desired period of time. preset to factory specifications. Although they are usually the best, you may need to make some further 1 Call up the Sleep Timer Setting adjustments for a natural looking image. Hit [SLEEP] so that “SLEEP TIMER” appears. Make sure ... The unit must be turned on. • 2 Set sleep time Hit
ページ16に含まれる内容の要旨
ADDING/DELETING CHANNELS CHANNEL RESETTING The channels you no longer receive or seldom watch TV can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) Make sure ... The unit power must be turned on. • 1 Select “CHANNEL SET UP” Hit [SETUP]. - TV SETUP - RESETTING CHANNELS Press [K / L] to point to “CHAN- B CHANNEL SET UP LANGUAGE [ENGLISH] NEL SET UP”, then hit [ENTER]. 1 Select “CHANNEL SET UP” - TV SETUP - Hit [SETUP] on the remote control. Press [
ページ17に含まれる内容の要旨
MENU LANGUAGE TV 1 Select “LANGUAGE” - TV SETUP - Hit [SETUP]. CHANNEL SET UP Press [K / L] to point to “LAN- B LANGUAGE [ENGLISH] GUAGE”, then hit [ENTER] to select “ENGLISH” or “ESPAÑOL”= Spanish or “FRANÇAIS”= French. 2 Exit the Language mode Hit [SETUP] to return to exit the menu. NOTE: This function effects only the language on the • screen menu and not the audio source. If Spanish or French is selected accidentally, • 1) Hit [SETUP]. 2) Press [K / L] to point to “IDIOMA [ESPAÑOL]” or “LAN
ページ18に含まれる内容の要旨
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Recorded Playable Region code Disc size Disc types Mark (logo) signals discs DVD-Video or * 1,2,3,10 Example 12 cm Title 1 Title 2 Digital video DVD-RW or Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 DVD-R (MPEG2) - 8cm * 1,3,4,5,6 8,9 DVD+RW - DVD+R * 1,3,4,5,7,8,9 Audio CD * 3,5 Audio CD Example 12 cm - Digital audio or Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 CD-RW 8cm CD-R * 3,4,5,8,9 is a trademark of DVD Format/Logo Licensing
ページ19に含まれる内容の要旨
PLAYING A DISC BASIC PLAYBACK GENERAL FEATURES DVD-V CD DVD-V DVD may contain menus to navigate the disc and access Getting started special features. Press appropriate the Number buttons ¡Turn on the power of amplifier and any other com- or use [K / L / s / B] to highlight your selection in the ponents, if necessary. DVD main menu and hit [ENTER] to confirm. 1 Hit [POWER]. NOTES: ¡The power will turn on. ¡Select DVD mode by hitting [SELECT]. Then press [PLAY O] or [OPEN/CLOSE A A] before you
ページ20に含まれる内容の要旨
FAST FORWARD / RESUME FAST REVERSE DVD-V CD DVD-V CD 1 During playback, hit [STOP C]. 1 During playback, press ¡Resume message will appear on the TV screen. g g h h [FWD ] or [REV ]. ¡“ g 1” or “h 1” appears on the screen. 2 Hit [PLAY O], playback will resume from the point at which playback was stopped. 2 To select another speed, repeat step 1 until ¡To cancel resume, hit [STOP C] twice. your required speed appears on the screen. ¡If the unit is turned off, resume function will be can-
