ページ1に含まれる内容の要旨
component
systems
owner’s
manual
THANK YOU
®
for purchasing a JBL Power Series
automotive loudspeaker component
system. We’ve organized this manual
to make your installation as simple and
trouble-free as possible. Please read it
thoroughly before proceeding. Remember
to keep your sales receipt and this manual in a
safe place so both are available for future reference.
ページ2に含まれる内容の要旨
INSTALLATION WARNINGS AND TIPS INSTALLATION ABOUT THESE REAR DECK •At the installation sites, locate Figure 1. Mounting the P550c woofer Figure 3. Mounting the P650c in a INSTRUCTIONS PRECAUTION and make a note of all fuel lines, with the grille. standard 6" opening. Installation of automotive stereo com- In some cars, fuel tanks may be hydraulic brake lines, vacuum lines NOTE: The P650c uses an adapter to ponents can require extensive experi- located directly beneath the rear and electrical wir
ページ3に含まれる内容の要旨
INSTALLATION CONNECTIONS Figure 5. Mounting the tweeter using Open the crossover housing by firmly squeezing the sides The Power Series component crossover features a 4) the I-Mount flush-mounting kit. of the top half and lifting it away from the bottom. Using tweeter-level adjustment. The tweeter level may be set to screws or a wire tie, mount the crossover using the holes 0dB (flat response), or it may be attenuated by approxi- – provided. Observing proper polarity, connect the speakers mate
ページ4に含まれる内容の要旨
SPECIFICATIONS P550c P650c Type: 5-1/4" two-way component system 6-1/2" two-way component system Speaker Impedance: 4 ohms 4 ohms Power Handling: 70W RMS, 210W Peak 90W RMS, 270W Peak Sensitivity (2.83V, 1m): 89dB 90dB Frequency Response: 55Hz – 23kHz 45Hz – 23kHz Mounting Depth: 2-3 ⁄16" (56mm) 2-1/4" (58mm) Cut-Out Diameter: 4-11/16" (120mm) 5-1/16" (129mm) GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker