ページ1に含まれる内容の要旨
DisplayPort Extender over
Fiber Optic Cable
Model #: FO-DP-XX-MM
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No
ページ2に含まれる内容の要旨
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi
ページ3に含まれる内容の要旨
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions suppl
ページ4に含まれる内容の要旨
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction Avenview FO-DP-XX-MM Series with fiber optic cable system lets you extend DisplayPort digital sig
ページ5に含まれる内容の要旨
1.7 Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com 5
ページ6に含まれる内容の要旨
1.8 Installation Avenview FO-DP-XX-MM is composed of a Transmitter converting the graphic signal of a computer to optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted from the optical signal to electrical signal. The Transmitter should be connected to computer/media player DisplayPort connector and the Receiver should be connected to a monitor/TV with DisplayPort connector. Avenview FO-DP-xx-MM is designed to self-detect
ページ7に含まれる内容の要旨
Section 2: Specifications Item Description Units FO-DP-XX-MM (Transmitter) FO-DP-XX-MM (Receiver) Unit Description DisplayPort Fiber Optic Transmitter DisplayPort Fiber Optic Receiver Video Bandwidth 10bit Deep Color / 60Hz Supported Resolution & Up to WQXGA 2560 x 1600 @ 65 meters ( 210 feet) Distance Optical Converter 4 ch 850 nm Multi-Mode VCSEL 4 ch GaAs PIN photo Diode Connector Type 20 pin DisplayPort Plug (Male) 20 pin DisplayPort Plug (Female) Fiber Type 50/125 µm Multi-mode gl
ページ8に含まれる内容の要旨
2.1.2 Receiver Module Parameter Symbol Min Type Max Units Supply Voltage Vcc +5.0 V Power Supply Current Icc 280 mA Power Dissipation Po 1.4 W Diff. P-to-P Output Level 1 VTX-DIFF-PP-H 120 0.46 mV Diff. P-to-P Output Level 2 VTX-DIFF-PPR 40 0.68 mV Signal RXDAC Common Mode VTX-DC-CM 0 20 V 2.2 Connector Pin Assignment 2.2.1 Transmitter (Male) Pin Pin Name Pin Pin Name ML_Lane0(p) GND 1 2 ML_Lane0(n) 3 4 ML_Lane1(p) GND ML-Lane1(n) 5 6 ML-Lane2(p) GND 7 8 ML_Lan
ページ9に含まれる内容の要旨
2.3 Mechanical Specifications 2.3.1 Case Dimensions www.avenview.com 9
ページ10に含まれる内容の要旨
2.3.2 Optical Cable Info Dimensions of DisplayPort Cable Items Unit Specifications DisplayPort Cable Make-up - Layer Stranding Drain Wires (Size/Stranded) mm(AWG) -0.203/7 (24) AL-Mylar Screen Shield - A helically Cable Outer Diameter Mm 7.40 ± 0.20 Jacket Color - Black Fiber Cable Characteristics Item Spec Unit Condition Storage Temperature -20 ~ 70 °C Spooled Operational Test 0 ~ 50 °C - Max. Tensile Load 245 N Min. Radius Bend 25 mm 40 Crush Resistance 490 N/50mm
ページ11に含まれる内容の要旨
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
