ページ1に含まれる内容の要旨
PH0900
EN User manual 3
PH0900L
SP Manual de utilizador 15
ページ2に含まれる内容の要旨
EN Contents 3 Safety Precautions 4 Regulatory Information 6 Getting Started 6 System Setup 8 Connecting Other Devices 10 Programming Additional Extension Units 12 Troubleshooting 13 Things You Should Know 14 Warranty 15 Technical Support 2
ページ3に含まれる内容の要旨
EN Safety Precautions Safety Precautions Warning Refer all repairs to the company from which you purchased the product or from the manufacturer. Any repairs made by the user may void the warranty. Safety Precautions • Read and understand all instructions. • Follow all warnings and instructions marked on the system and in this guide. • Unplug this equipment from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Instead, use a moder- ately damp cloth. (A cloth dampened with r
ページ4に含まれる内容の要旨
EN Safety Precautions • Avoid using a telephone, other than a cordless phone, during an electrical storm.There is a risk of electric shock from lightning. • As with any electrical device, it is recommended you unplug this equipment during lightning storms in order to avoid damaging the equipment. Regulatory Information Regulatory Information FCC Notices This equipment has been tested and found to comply with the limits for a Class B digital device according to FCC Part 15 Rules.These limits are
ページ5に含まれる内容の要旨
EN Regulatory Information should notify you in advance. If advance notice is not possible, the telephone company should notify you as soon as possible and should advise you of your right to file a complaint with the FCC.The telephone company could make changes regarding its facilities and procedures, which may affect the operation of this equipment. If this occurs, the telephone company should pro- vide advance notice, so you can make the necessary modifica- tions to maintain uninterrupted servi
ページ6に含まれる内容の要旨
EN Getting Started The package should contain the items listed below. If any of these items are not included, notify the shipper or dealer from which you purchased the product. Base Unit The base unit has two phone connectors on the right side (one labeled PHONE, the other labeled LINE), an indicator light on the bottom, right corner and a push button on the bottom, right side. It is also labeled BASE on both the voice/data and data-only versions. Extension Unit The extension unit has a single p
ページ7に含まれる内容の要旨
EN System Setup 2. Insert one end of the provided six-foot phone cord into a functioning wall phone jack. Plug the other end of same phone cord into the phone connector on the base unit labeled LINE. 3. After you have plugged the base unit into an electrical out- let, plug the extension unit into an A/C outlet where you desire connection. NOTE: The indicator light on the extension unit will blink red.As soon as it recognizes the base unit, the indicator light will then illuminate green. The in
ページ8に含まれる内容の要旨
EN Connecting Other Devices Connecting Other Devices Satellite Receiver Follow these steps to connect a satellite receiver to the Philips Wireless Phone Jack extension unit: 1. Locate an existing electrical outlet near the satellite receiver. 2. Plug the extension unit into the electrical outlet. 3. Plug one end of a phone cord into the single phone jack on the right side of the extension unit. 4. Plug the other end of a phone cord into the phone jack on the back of the satellite receiver. 5. Lo
ページ9に含まれる内容の要旨
EN Connecting Other Devices Troubleshooting section. 7. If possible, send a test fax from the fax machine you just con- nected. If you cannot send a test fax, ensure you have a dial tone. Dial-Up Modem Follow these steps to connect a dial-up modem to the Philips Wireless Phone Jack extension unit: 1. Locate an existing electrical outlet near your dial-up modem. 2. Plug the extension unit into the electrical outlet. 3. Plug one end of a phone cord into the single phone jack on the right side of t
ページ10に含まれる内容の要旨
EN Programming Additional Units Programming Additional Extension Units If you would like to add extension units to your current setup, or the indicator light on the extension unit remains red after following the proper installation procedure, you must program the new extension unit to function with the other units.To do so, follow these steps. 1. Press and release the button on the bottom right side of the base unit (two phone connectors),which puts the base unit into program mode.The indicator
ページ11に含まれる内容の要旨
EN Programming Additional Units program the extension unit again. If you do not intend to program the extension unit, unplug the extension unit, and plug it back in to restore a solid green indicator light. 4. When you have finished programming the extension units, press the button on the right side of the base unit.This takes the base unit out of program mode and the indicator light turns green. Ensure the indicator lights on the base and extension units are solid green. NOTE: If you forget t
ページ12に含まれる内容の要旨
EN Troubleshooting Indicator light not Either the indicator light itself has failed or the unit is not getting power. Ensure the unit is illuminated on plugged directly into a functional A/C outlet—not a switched outlet, plug strip, unit surge sup- baseunit and/or pressor, extension cord or GFCI-protected outlet.Try various electrical outlets. If problem per- extension sists, contact customer support at 919-573-7854. Extension unit’s Most likely, the extension unit cannot communicate with the b
ページ13に含まれる内容の要旨
EN Troubleshooting Troubleshooting Refer to the following table for common troubleshooting measures. Problem Explanation and Action Important Notes on Operation • Do not plug equipment into a surge protector, plug strip,A/C extension devices or GFCI-protected outlets. Doing so can negatively affect performance. • Equipment will not operate during a power outage. Use a hardwired phone during a power outage. • Equipment can only be used for a single phone line. • If you cannot get a dial tone, ref
ページ14に含まれる内容の要旨
EN Warranty One-Year Limited Warranty Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your purchase of this product.This warranty extends only to the original purchaser of the product, and is not transferable.To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the pr
ページ15に含まれる内容の要旨
SP Contenido 16 Precauciones de seguridad 17 Información reglamentaria 18 Información reglamentaria 19 Configuración del sistema 21 Conexión de otros dispositivos 23 Programación de unidades adicionales de extensión 25 Identificación y resolución de problema 26 Lo que debe saber 27 Garantía 27 Asistencia Técnica 15
ページ16に含まれる内容の要旨
SP Precauciones de seguridad Precauciones de seguridad Advertencia Dirija todos los pedidos de reparaciones a la compañía donde com- pró el producto o al fabricante. Las reparaciones efectuadas por el usuario pueden anular la garantía. Precauciones de seguridad • Asegúrese de leer y entender todas las instrucciones. • Observe todas las advertencias y siga todas las instrucciones identificadas en el sistema y en esta guía. • Desenchufe el equipo del tomacorriente de pared antes de limpiarlo. No u
ページ17に含まれる内容の要旨
SP Precauciones de seguridad • Evite usar teléfonos que no sean inalámbricos durante una tor- menta eléctrica, pues hay riesgo de sufrir descargas eléctricas por relámpago. • Tal como ocurre con cualquier otro dispositivo eléctrico, se recomienda desenchufar este equipo durante las tormentas eléctricas para evitar dañarlo. Información reglamentaria Información reglamentaria Avisos de FCC (Comisión Federal de Comunicaciones) Las pruebas de este equipo demuestran que cumplen las limitaciones corre
ページ18に含まれる内容の要旨
SP Información reglamentaria posible e informarle que tiene el derecho de presentar una queja ante la FCC. La compañía telefónica podría efectuar cambios en las instalaciones y los procedimientos, los cuales pueden afectar el fun- cionamiento de este equipo. Si esto ocurriera, la compañía telefóni- ca debería darle un aviso de antemano para que pueda hacer las modificaciones necesarias y mantener la continuidad del servicio. Número de equivalencia de llamador Aviso: El número de equivalencia de
ページ19に含まれる内容の要旨
SP Información preliminar Contenido del paquete El paquete debería contener los siguientes artículos. Si falta alguno de estos artículos, avise al consignador o distribuidor de quien haya adquirido el producto. Unidad base: La unidad base tiene dos conectores telefónicos del lado derecho (uno rotulado PHONE y el otro LINE), un indicador luminoso en la esquina derecha inferior y un botón pulsador del lado derecho inferior.También tiene el rótulo BASE tanto en la ver- sión para voz/datos como en l
ページ20に含まれる内容の要旨
SP Configuración del sistema NOTA: el indicador luminoso de la unidad base aparecerá en rojo luego de enchufarse la unidad en el tomacorrientes. 2. Inserte un extremo del cable telefónico de seis pies incluido en una ficha telefónica que funcione. Enchufe el otro extremo del mismo cable telefónico en el conector telefónico rotulado LINE de la unidad base. 3. Luego de enchufar la unidad base en un tomacorrientes,enchufe la unidad de extensión en un tomacorrientes de CA donde desee tener la conexi
