ページ1に含まれる内容の要旨
Mini 1:8 HDMI 1.3 Splitter
GTV-MHDMI1.3-148
User Manual
www.gefentv.com
ページ2に含まれる内容の要旨
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentv.com support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Mini 1:8 Splitter for HDMI 1.3 is a trademark of Gefen Inc.
ページ3に含まれる内容の要旨
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The Mini 1:8 Splitter For HDMI 1.3 7 EDID Management 9 Internal EDID Specifi cations 10 Automatic Deep Color Detection 11 Specifi cations 12 Warranty
ページ4に含まれる内容の要旨
INTRODUCTION Congratulations on your purchase of the Mini 1:8 Splitter for HDMI 1.3. Your com- plete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you fi nd you
ページ5に含まれる内容の要旨
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE MINI 1:8 SPLITTER FOR HDMI 1.3 • The Mini 1:8 Splitter for HDMI 1.3 features EDID selection that may impact the resolutions/features that are available for use. Please see the EDID Mode section on page 6 for more information on the usage of this feature. • HDMI 1.3 Features: 225 MHz (up to 12 bit YUV 444 @ 1080p) Deep Color (XV Color) Dolby TrueHD & DTS-HD Master Audio Color Space Conversion CEC Pass Through and xvYCC Lip
ページ6に含まれる内容の要旨
FEATURES Features • Simultaneously displays a single HDMI 1.3 source on up to 8 HDMI- compliant monitors without signal loss • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p@60 Hz • EDID Detection/Adjustment for rapid integration of source and displays • Supports LPCM 7.1 audio, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio • Supports DVI source and DVI displays using HDMI-to-DVI converter cable • HDCP keysets allow each output to work independently
ページ7に含まれる内容の要旨
PANEL LAYOUT 12 3 4 5 6 6 4
ページ8に含まれる内容の要旨
PANEL DESCRIPTIONS 1 HDMI Outputs 1-4 Connect an HDMI capable device to any of these output ports. The device attached to output port 1 will be used to read EDID when the EXTERNAL EDID mode is selected. NOTE: All devices connected to any of the output ports must be capable of accepting at least one resolution listed in the EDID of the device connected to output port 1 when using the EXTERNAL EDID mode. All devices connected to any output port must be capable of accepting at least one resol
ページ9に含まれる内容の要旨
CONNECTING AND OPERATING THE MINI 1:8 SPLITTER FOR HDMI 1.3 How to Connect the Mini 1:8 Splitter for HDMI 1.3 1. Connect an HDMI source device to the HDMI input port on the Mini 1:8 Splitter for HDMI 1.3 using the INCLUDED HDMI cable. 2. Connect up to 8 HDMI capable devices to the output ports on the Mini 1:8 Splitter for HDMI 1.3 using USER supplied HDMI cables. NOTE: Always connect one HDMI output device to output port 1 when using the EXTERNAL EDID mode. Please read the Operation Notes (pa
ページ10に含まれる内容の要旨
EDID MANAGEMENT What options do I have to manage the EDID in the Mini 1:8 Splitter for HDMI 1.3? It is important to understand that the EDID contains much more than just listings of supported resolutions and audio formats. However, resolutions and audio formats are the two key types of information that a user will need to understand how to use these EDID management functions. Common problems that a user may encounter while using a splitter can be: 1. Video may not be visible on all output de
ページ11に含まれる内容の要旨
EDID MANAGEMENT Continued from the previous page NOTE: All other HDMI capable devices/displays connected to the output ports MUST be compatible with at least one resolution/audio format specifi ed in this EDID. It is recommended to set, on the source device, a common resolution and audio format shared by all attached devices/displays. This is to ensure a compatible signal is output to all connected devices/displays. -To use this mode, set the EDID Mode Switch on the front panel to the INT po
ページ12に含まれる内容の要旨
INTERNAL EDID SPECIFICATIONS Listed Resolutions: Interlaced (I) Resolution Timing (Hz) Aspect Ratio Progressive (P) 640x480 P 59.94/60 4:3 720x480 I 59.94/60 4:3 720x480* P 59.94/60 4:3 1280x720 P 59.94/60 16:9 1920x1080 I 59.94/60 16:9 1920x1080 P 59.94/60 16:9 1920x1080 P 23.97/24 16:9 720x576 I 50 4:3 720x576 P 50 4:3 1280x720 P 50 16:9 1920x1080 I 50 16:9 1920x1080 P 50 16:9 720x480 P 59.94/60 16:9 720x576 P 50 16:9 *Naitive resolution Listed Audio Formats In Multi Channel Mode: Supported F
ページ13に含まれる内容の要旨
AUTOMATIC DEEP COLOR DETECTION Automatic Deep Color EDID Features The Mini 1:8 Splitter for HDMI 1.3 features an automatic EDID modifi cation feature that will evaluate all connected devices/displays for Deep Color compatibility. Regardless of the selected EDID Mode, if an output device/display that is connected does not support the HDMI 1.3 specifi ed Deep Color feature, all EDID Deep Color features will be removed. This will maximize compatibility in a mixed output device environment. This
ページ14に含まれる内容の要旨
SPECIFICATIONS Single Link Bandwidth ............................................................................. 225 MHz Input Video Signal .............................................................................. 1.2 volts p-p Input DDC Signal ......................................................................... 5 volts p-p (TTL) Maximum Video Resolution ............... 1080p@60 Hz with up to 12-bit Deep Color HDMI Connector ................................... type A 19 pin femal
