Winegard RP80RTSの取扱説明書

ページ1に含まれる内容の要旨

Stationary Electronics Replacement Kit
Model RP80RTS
For help, email help@winegard.com or call 1-800-788-4417.
For receivers and programming, call 1-866-609-9374.
For up-to-date information on receiver compatibility and
programming, visit www.winegard.com/receivers.
2452280

ページ2に含まれる内容の要旨

Parts of the Antenna Removing the Existing Installing the Replacement Overhead View (Dome Removed) Stationary Electronics Box Stationary Electronics Box Reflector Cable harness 1 1. 1. Before starting, turn off the power to the unit, Insert the second (larger) motor connection and unplug the unit from the receiver. into the port underneath “P4 ELEVATION” on Cable harness 2 the replacement stationary electronics box. 2. Using a #2 Phillips screwdriver, remove the LNB Cable harness 3 screws ho

ページ3に含まれる内容の要旨

Routing Cables through Re-Installing the Dome the Four Cable Harnesses 1. Replace the dome. 1. Route the two coaxial cables underneath 2. Align the holes in the base with the holes in “LNBF” and “RECEIVER” through cable the dome. If installing a handle, align the holes harness 1. in the handle with the holes in the base. To protect the cable connections from accidental 2. Route the cable running from “RECEIVER” damage, install the handle using the two holes and the cable running from th