ページ1に含まれる内容の要旨
SA-5
The Official Mixer of
The Allies All-star Beatdown
OWNER’S M A N U A L
STANTON MAGNETICS, INC
info@stantonmagnetics.com
www.STANTONDJ.com
© 2003, Stanton Magnetics, Inc.
ページ2に含まれる内容の要旨
W E L C O M E ! W A R R A N T Y This unit has been designed and manufactured using quality components. Thank you for making Stanton your first choice in professional DJ mixers. This Therefore, it is warranted to be free from defects in materials (limited as specified innovative mixer has been developed with input from the professional DJ below), and workmanship for a period of twelve (12) months from the original community, bringing to the marketplace a previously unavailable, affordable purchas
ページ3に含まれる内容の要旨
T E C H N I C A L S P E C I F I C AT I O N S S A - 5 F E A T U R E S Line input: 2 (RCA) x 2 channels, -10 dBV / 10 kOhm The SA-5 “The Official Mixer Of The Allies All-Star Beatdown” Session Input: 2 (RCA), -10 dBV / 10 kOhm Phono input: 2 (RCA) x 2 channels, -50 dBV / 47 kOhm Introducing the world’s first all fader battle mixer. Designed by Stanton based on DJ Infamous’ requirements, the SA-5 is a high-end, affordable mixer with all the Mic input: 1(1/4") -50 dBV / 2.4 kOhm balanced requirement
ページ4に含まれる内容の要旨
DESCRIPTION OF FUNCTIONS FADER CLEANING AND REPLACEMENT 5. Examine the center channel of the fader body (found inside the bottom of 2 3 4 the fader casing) and if dirty, clean using cotton buds. 6. Re-assemble and lubricate the fader as follows: a) Secure the end block and guide rail onto the fader body. b) Insert track into the fader body. 1 c) Insert slider assembly onto guide rail and into the fader body. Move 6 slider from end to end to disperse the oil evenly. Carefully wipe away any excess
ページ5に含まれる内容の要旨
FADER CLEANING AND REPLACEMENT M I X E R F U N C T I O N S After constant scratching, the SA-5 faders may need to be cleaned and 6. Crossfader Reverse: Reverses the direction of the crossfader. When lubricated from time to time. This will ensure long life and keep a smooth feeling switched down, channel 1 will be assigned to the right side of the throughout the fader's lifetime. Follow the instructions below to lubricate and crossfader, and channel 2 to the left side. clean your faders: 7. OS2 l
ページ6に含まれる内容の要旨
BACK P A N E L B A C K PA N E L 28. Headphone output: Standard 1/4” headphone output connector. 22 23 25 26 26 27 25 29. Session/Mic switch: Used to assign the Session/Mic fader to either the Session input or the MIC input. 30. Microphone input: 1/4” connector for connecting a microphone. 31. Phono Inputs: Phono level inputs for channels 1 and 2. Do not plug line 20 outputs into phono inputs. 28 32. Line inputs: Line level inputs for channels 1 and 2. 29 19 30 F R O N T PA N E L 21 24 31 32
