ページ1に含まれる内容の要旨
model
s800
ページ2に含まれる内容の要旨
2 © 2003 Directed Electronics, Inc
ページ3に含まれる内容の要旨
CONGRATULATIONS Congratulations for choosing a Directed cones and neodymium motors, the Studio neodymium component speaker Directed Studio line of automotive system from Directed Electronics. speakers will excite and delight the auto sound enthusiast with years of high Directed Electronics has been the quality audio reproduction. industry leader in high-quality automo- tive security and audio equipment since Directed Studio speakers are covered by 1990, and with the introduction of the a two-yea
ページ4に含まれる内容の要旨
LIMITED TWO-YEAR CONSUMER WARRANTY Directed Electronics, Inc. (DEI) promises to OF MERCHANTABILITY, FITNESS FOR PARTIC- the original purchaser, to replace this product ULAR PURPOSE, AND WARRANTY OF NON- should it prove to be defective in workman- INFRINGEMENT OF INTELLECTUAL PROPERTY ship or material under normal use, for a ARE EXPRESSLY EXCLUDED TO THE period of two years from the date of MAXIMUM EXTENT ALLOWED BY LAW, AND purchase from the dealer as indicated by the DEI NEITHER ASSUMES NOR AUT
ページ5に含まれる内容の要旨
FEATURES Exclusive Directed custom cast Heavy duty gold-plated three way aluminum frame. binding posts. Rugged Santoprene surround. Tuned to deliver optimum mid-bass response for up front bass. Multi-layered mica filled low reso- nance 0.7mm polypropylene cone. Outboard passive crossovers support three way system design. Powerful 140 gram neodymium magnets deliver lower distortion Custom impedance and frequency and higher efciency. matched crossover network. Optimized mechanical complia
ページ6に含まれる内容の要旨
SOUND QUALITY Obtaining the highest quality sound designing and installing an auto sound reproduction in the mobile environment system. requires installation techniques and To achieve the best sound quality knowledge of vehicle interiors that go possible from your Directed Audio loud- far beyond simple replacement of stock speakers, Directed recommends the speakers. Speaker location, orientation, installation be performed by an MECP phasing, and the vehicles interior mate- certified technician.
ページ7に含まれる内容の要旨
WOOFER INSTALLATION 1. Mark and cut a 7-5/8” (186mm) 5. Attach the wires to the speaker and hole for mounting the speaker. be sure to observe proper speaker polarity. 2. Drill the holes for the mounting screws using a 1/8” (3mm) drill 6. Place the woofer in the hole. Insert bit. screws through grill clips and woofer mounting holes. Screw 3. Route the wiring harness through the woofer into place using the six mounting hole. supplied mounting screws and grill clips. 4. Install the spring clips ove
ページ8に含まれる内容の要旨
WIRING CONNECTIONS Input s800 crossover. Connect the nega- tive input on the two-way crossover 1. Connect the positive from one to the light pass output negative on channel of the amplifier to positive the s800 crossover. input of s800 crossover. Connect the negative from the same 3. Connect the tweeter and mid-range channel of the amplifier to the speaker to the two-way crossover negative input of the s800 as per instructions provided with crossover. the two-way system. 4. To use the s800 mid-b
ページ9に含まれる内容の要旨
SPECIFICATIONS Directed model s800 Frequency response 40 Hz - 2 kHz Power handling RMS 75 watss Power handling peak 150 watts Impedance 3.256 ohms Magnet weight 140.5 g Vas 12.974 L Fs 66.153 Hz Qts 0.25 Efficiency (1W/1M) 93.488 Mounting Depth 2-5/16” Mounting hole diameter 7-1/8” C Co om mm mo on n D Drriiv ve err S Sp pe ec ciiffiic ca at tiio on ns s:: Magnet type Neodymium Magnet diameter 1.5” Voice coil forner Kapton Voice coil diameter 1-1/2” Voice coil layers 4 9 © 2003 Directed Elect
ページ10に含まれる内容の要旨
10 © 2003 Directed Electronics, Inc
ページ11に含まれる内容の要旨
11 © 2003 Directed Electronics, Inc
ページ12に含まれる内容の要旨
The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide customers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered. Directed Electronics, Inc. Vista, California 92083 Directed® is committed to delivering world-class quality products and services that excit
