Shindaiwa T3410X/EVCの取扱説明書

デバイスShindaiwa T3410X/EVCの取扱説明書

デバイス: Shindaiwa T3410X/EVC
カテゴリ: トリマー
メーカー: Shindaiwa
サイズ: 2.19 MB
追加した日付: 10/3/2013
ページ数: 72
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスShindaiwa T3410X/EVCの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Shindaiwa T3410X/EVCに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Shindaiwa T3410X/EVCをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Shindaiwa T3410X/EVCのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Shindaiwa T3410X/EVCの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Shindaiwa T3410X/EVC 取扱説明書 - Online PDF
Advertisement
« Page 1 of 72 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Shindaiwa T3410X/EVCを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Shindaiwa T3410X/EVCの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

English................1
Español.........SP_1
Françias........FR_1
SHINDAIWA OWNER’S/OPERATOR’S MANUAL
T3410/EVC TRIMMER
T3410X/EVC TRIMMER
T3410
T3410X
WARNING!
Minimize the risk of injury to yourself and
others! Read this manual and familiarize yourself
with the contents. Always wear eye and hearing pro-
tection when operating this unit.
Part Number 89301 Rev. 06/2009

ページ2に含まれる内容の要旨

Introduction IMPORTANT! The Shindaiwa C4 series of hand-held WARNING! The information contained in these instruc- power equipment is designed and built The engine exhaust from this tions describes units available at the time to deliver superior performance and reli- product contains chemicals known to of publication. ability without compromise to quality, the State of California to cause can- comfort, safety or durability. Shindaiwa cer, birth defects or other reproduc- Shindaiwa Inc. r

ページ3に含まれる内容の要旨

Safety Work Safely WARNING! WARNING! Trimmers and brushcutters operate at Never make unauthorized Never operate very high speeds and can do serious dam- attachment installations. power equipment of any kind age or injury if they are misused or abused. if you are tired or if you are under the Never allow a person without training or - instruction to operate this unit! Stay Alert tion or any other substance that could You must be physically and mentally fit to affect your ability or judgem

ページ4に含まれる内容の要旨

Safety (continued) The Properly Equipped Operator Wear hearing protection devices and a Always wear eye protection such as broad-brimmed hat or helmet. A helmet goggles or safety glasses to shield is required when using a blade-equipped against thrown objects. brushcutter to clear small trees. Always wear a harness when operating the unit . It adds comfort and helps ensure safety by limiting Prolonged exposure to excessive noise movement fore and aft. When the harness is is fatiguing an

ページ5に含まれる内容の要旨

Product Description Using the illustration as a guide, familiarize yourself with your machine and its T3410 various components. Under- standing your machine Ignition Switch helps ensure top perfor- mance, long service life and safer operation. Fuel Tank T3410X Outer Tube Throttle Trigger Ignition Switch Throttle Interlock Gearcase Cutting Handle Attachment Shield Grip Fuel Tank Outer Tube Throttle Trigger Trimmer Head Barrier Gearcase Bar Hanger WARNING! Cutting Attachment Shield Do not ma

ページ6に含まれる内容の要旨

Assembly This unit comes fully assembled with the This unit comes fully assembled with the Engine and shaft assembly exception of the cutting attachment shield exception of the cutting attachment shield and cutting attachment. Cutting attachment shield and cutting attachment. IMPORTANT! Cutting attachment Prior to Assembly The terms “left”, “left-hand”, and “LH”; Before assembling, make sure you have all “right”, “right-hand”, and “RH”; “front” and Kit containing cutting attachment the com

ページ7に含まれる内容の要旨

Assembly (continued) Cutting Attachment Shield - T, TX unit 1. Insert the cutting attachment shield T unit between the outer tube and the cutting Socket- attachment mounting plate. Head Cap Outer Tube Screws Bracket NOTE: It may be necessary to loosen the retain- ing nut and clamp screw to adjust cutting Cutting attachment shield mounting plate. Shim Attachment Shield 2. Fit the two shims and the bracket over Clamp Screw the outer tube and loosely install the four socket-head screws. 3. Tig

ページ8に含まれる内容の要旨

Assembly (continued) Adjust throttle lever free play The throttle lever free play should be approximately 4 - 6 mm (3/16” - 1/4”). Make sure that the throttle lever oper- ates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illus- trations that follow. 4-6 mm (3/16”-1/4”) 1. Loosen the air cleaner cover knob(s) Throttle Free Play and remove the air cleaner cover. Throttle lever free play Remove air cleaner cover 2. Loosen the lock

ページ9に含まれる内容の要旨

Assembly (continued) Installing Brushcutter Blade WARNING! Shaft Bolt Slide the safety clip off-center Do not attach any blade to a unit without proper installation of Bolt Guard Output Shaft all required parts. Failure to use the proper parts can cause the blade to Holder B Safety Clip and/or bystanders. Gear shaft Safety Clip 1. Turn the unit upside down so the gear case output shaft is facing UP and Holder A remove the shaft bolt, bolt guard and holder B from the gear case shaft. 2.

ページ10に含まれる内容の要旨

Mixing fuel Examples of 50:1 mixing quantities CAUTION CAUTION U.S. METRIC 2-cycle 2-cycle Never use any type of gasoline contain- This engine is designed to operate on Gasoline Gasoline mixing oil mixing oil ing more than 10% alcohol by volume! a 50:1 mixture consisting of unleaded US Gallons Fl.oz. Liter cc. Some types of gasoline contain alcohol gasoline and ISO-L-EGD or JASO FD 1 2.6 4 80 as an oxygenate. Oxygenated gaso- class 2-cycle mixing oil only. Use of 2 5.2 8 160 line may cause

ページ11に含まれる内容の要旨

Starting the Engine IMPORTANT! Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP. WARNING! Return Tube Primer Bulb ON Never start the engine from the operating position. 1. Slide the ignition switch to the “ON” Throttle Lock position. Button 2. Set the throttle lever to the “fast idle”: a. Squeeze the throttle lever toward the handgrip on the shaft tube. Press primer Slide ignition to ON bulb... b. Dep

ページ12に含まれる内容の要旨

Starting the Engine (continued) Starting A Flooded Engine 1. Disconnect the spark plug lead and use 3. Open the choke and fully depress the 5. Repeat the starting procedure for a the spark plug wrench to remove the throttle lever with your left hand, then warm engine. spark plug (turn counter clockwise to pull the starter handle rapidly with your 6. If the engine still fails to start, refer to remove). right hand to clear excess fuel from the the troubleshooting section near the combustion

ページ13に含まれる内容の要旨

Operation Shoulder Strap IMPORTANT! WARNING! TX unit Adjust the shoulder strap or harness so the Always wear a shoulder strap shoulder pad rests comfortably on the off-side Harness when operating this unit with a blade. shoulder and the cutting path of the cutting A shoulder strap is also recommened attachment is parallel to the ground. Make sure when using trimmer line. all hooks and adjustment devices are secure. 1. Hook the strap hook to the hanger on the outer tube. 2. Wear the shoul

ページ14に含まれる内容の要旨

T U C T O N O D Operation (cont.) Using a Blade Brushcutter harness Whenever you strike a hard object with a WARNING! blade, always stop the brushcutter and A harness provides additional protection carefully inspect the blade for damage. against blade thrust. In addition, a har- Before working with a blade-equipped NEVER OPERATE THE BRUSHCUT- ness gives significant support and comfort unit, always inspect and clean the TER WITH A DAMAGED BLADE! to help ensure safe and efficient opera- ti

ページ15に含まれる内容の要旨

Maintenance General maintenancel IMPORTANT! WARNING! WARNING! MAINTENANCE, REPLACEMENT Before performing any mainte- Non-standard accessories, cut- OR REPAIR OF EMISSION CONTROL nance, repair, or cleaning work on the ting attachment, or replacement parts DEVICES AND SYSTEMS MAY BE PER- unit, make sure the engine and cutting may not operate properly with your unit FORMED BY ANY REPAIR ESTABLISH- attachment are completely stopped. and may cause damage and lead to MENT OR INDIVIDUAL; HOWEVE

ページ16に含まれる内容の要旨

Maintenance (continued) 10-Hour maintenance (more frequently in dusty conditions) Loosen fasteners 1. Remove the air filter cover by loosen- ing the cover screw(s) and lifting. 2. Remove and inspect the pre-filter. If the pre-filter is torn or otherwise dam- aged, replace it with a new one. 3. Clean the pre-filter with soap and water. Let dry before reinstalling. 4. Inspect the air filter element. If the ele- Filter element ment is damaged or distorted, replace it with a new one. 5. Tap filter gen

ページ17に含まれる内容の要旨

Maintenance (continued) 50-hour maintenance Remove and replace the fuel filter element. Use a hooked wire to extract the fuel filter from inside the fuel tank. Inspect the fuel filter element. If it shows signs of contam- ination, replace with a genuine Shindaiwa replacement fuel filter element. CAUTION! Make sure you do not pierce the fuel line Hooked wire with the end of the hooked wire. The line is delicate and can be damaged easily. Before reinstalling the new filter element, inspect the

ページ18に含まれる内容の要旨

Maintenance (continued) If the engine becomes sluggish and low on power, check and clean the spark arrester screen. Engine Cover WARNING! Engine Cover Screws Never operate the unit with a arrester! Operating with a missing or and could also damage your hearing. 1. With a 3 mm hex wrench remove the engine cover screws and the engine cover. 2. With a 4 mm hex wrench, remove the 3 muffler bolts and the muffler. 3. With a small flat bladed screwdriver remove the 2 screws holding the

ページ19に含まれる内容の要旨

Maintenance (continued) Blade Sharpening WARNING! Shindaiwa Tornado™ Blade Multiple-tooth Circular Blade Wear protective gloves when handling or performing maintenance Round on the blade. File When the cutting edges of the blade become dull, they can be resharpened with a few strokes of a file. Round File In order to keep the blade in balance, all cutting edges must be sharpened equally. Maintain a radius of 0.04 to 1 to 1.5 mm (0.06”) WARNING! The top plate of each at the base of each too

ページ20に含まれる内容の要旨

Troubleshooting Guide ENGINE DOES NOT START What To Check Possible Cause Remedy Faulty recoil starter. Consult with an authorized servicing dealer. NO Fluid in the crankcase. Does the engine crank? Internal damage. YES Loose spark plug. Tighten and re-test. NO Good compression? Excess wear on cylinder, piston, Consult with an authorized servicing rings. dealer. YES Fuel incorrect, stale, or contaminated; Refill with fresh, clean unleaded gasoline mixture incorrect. with a pump octane of 87 or


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Shindaiwa 63848-94010 取扱説明書 トリマー 14
2 Shindaiwa 80844 取扱説明書 トリマー 8
3 Shindaiwa 80974 取扱説明書 トリマー 3
4 Shindaiwa 68800-94313 取扱説明書 トリマー 2
5 Shindaiwa 80775 取扱説明書 トリマー 0
6 Shindaiwa 81601 取扱説明書 トリマー 1
7 Shindaiwa 81606 取扱説明書 トリマー 0
8 Shindaiwa 81372 取扱説明書 トリマー 0
9 Shindaiwa 81010 取扱説明書 トリマー 0
10 Shindaiwa 81605 取扱説明書 トリマー 0
11 Shindaiwa 81646 取扱説明書 トリマー 0
12 Shindaiwa 81643 取扱説明書 トリマー 0
13 Shindaiwa 81642 取扱説明書 トリマー 0
14 Shindaiwa 82014 取扱説明書 トリマー 0
15 Shindaiwa 89309 取扱説明書 トリマー 0
16 Sony PCS-G70P 取扱説明書 トリマー 12
17 Sony PCS-G70 取扱説明書 トリマー 12
18 ABC Office 440 取扱説明書 トリマー 2
19 Sony 370A 取扱説明書 トリマー 83
20 ABC Office 448 取扱説明書 トリマー 2