ページ1に含まれる内容の要旨
OWNER’S
MANUAL
model CSX-T
ページ2に含まれる内容の要旨
CONGRATULATIONS Congratulations for choosing a Directed grade neodymium motors, the Directed SX series neodymium component SX line of automotive speakers will speaker system from Directed Electronics. excite and delight the auto sound enthu- siast with years of high quality audio Directed Electronics has been the reproduction. industry leader in high-quality automo- tive security and audio equipment since Directed SX speakers are covered by a 1990, and with the introduction of the two-year limit
ページ3に含まれる内容の要旨
LIMITED TWO-YEAR CONSUMER WARRANTY Directed Electronics, Inc. promises to the orig- FOR PARTICULAR PURPOSE, AND WARRANTY inal purchaser, to replace this product should OF NON-INFRINGEMENT OF INTELLECTUAL it prove to be defective in workmanship or PROPERTY ARE EXPRESSLY EXCLUDED TO THE material under normal use, for a period of two MAXIMUM EXTENT ALLOWED BY LAW, AND years from the date of purchase from the DIRECTED ELECTRONICS, INC. NEITHER dealer as indicated by the date code marking ASSUMES NOR
ページ4に含まれる内容の要旨
FEATURES Tweeter Crossover assemblies for each tweeter. New hotter 19mm ferrofluid cooled silk dome tweeters with neodymium Butyl rubber segments provided to magnet. facilitate grill mounting, sealing air leaks, or damping unwanted vibra- 2 Angled and 2 non-angled 19mm tion. flush and surface mount tweeter housings provided. WARNING High-powered car audio They may also impair a driver’s ability to systems may produce sound hear traffic sounds or emergency vehi- pressure levels that exceed cl
ページ5に含まれる内容の要旨
INSTALLATION PRECAUTIONS The Directed SX series neodymium sepa- distortion or shorting of the speaker rates are designed for installation into leads to the chassis ground. Over- factory speaker locations, custom sized holes will not allow the mounting enclosures or any flat mounting mounting screws to make sufficient surface inside the vehicle. The following contact with the panel, allowing the precautions and instructions cover the speaker to become loose. basic and most common types of install
ページ6に含まれる内容の要旨
TWEETER INSTALLATION Review the Installation Precautions 5. Remove the tweeter grill, and the remove the tweeter from the section of this guide before proceeding. surface mount housing using the Flush Mounting into tweeter tool (turn CW). Insert the Mounted Panels proper length machine bolt through N No ot te e:: Use either the standard mount the housing and connect to the housing or the angled mount housing. metal mounting bracket. (See Figure 2.) 1. Determine the tweeter mounting location, the
ページ7に含まれる内容の要旨
Tweeter Surface Mounting route the speaker wire from the crossover through the grommet. N No ot te e:: Use either the standard mount housing or the angled mount housing. 5. After removing the surface mount tweeter assembly, route the tweeter 1. Determine the tweeter mounting wires through the larger hole in the location, then route the wires from housing and connect to the speaker the crossover to the tweeter loca- wires from the crossover. (See tion. Figure 4.) 2. Remove the tweeter grill, and
ページ8に含まれる内容の要旨
SPECIFICATIONS M Mo od de ell C CS SX X--T T T Tw we ee et te err Fs 1.9 kHz Efficiency (1W/1M) 91dB Magnet Diameter 3/4” Voice Coil Diameter 3/4” Mounting Hole Diameter 1–3/4” C Crro os ss so ov ve err 12 dB/octave with tweeter protection 8 8 © 2004 Directed Electronics, Inc
ページ9に含まれる内容の要旨
The company behind this system is Directed Electronics, Inc. Since Directed Electronics, Inc. its inception, Directed has had one purpose, to provide customers with the finest Vista, California 92081 vehicle security, car stereo products, rear seat entertainment, and accessories avail- www.directed.com able. The recipient of more than 20 patents in the field of advanced electronic tech- nology, Directed is ISO 9001 registered. Directed® is committed to delivering world-class quality products an
