Shindaiwa T2510Xの取扱説明書

デバイスShindaiwa T2510Xの取扱説明書

デバイス: Shindaiwa T2510X
カテゴリ: トリマー
メーカー: Shindaiwa
サイズ: 6.05 MB
追加した日付: 10/3/2013
ページ数: 40
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスShindaiwa T2510Xの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Shindaiwa T2510Xに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Shindaiwa T2510Xをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Shindaiwa T2510Xのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Shindaiwa T2510Xの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Shindaiwa T2510X 取扱説明書 - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Shindaiwa T2510Xを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Shindaiwa T2510Xの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

SHINDAIWA OWNER’S/OPERATOR’S MANUAL
T2510 TRIMMER
T2510X TRIMMER
T2510
T2510X
WARNING!
Minimize the risk of injury to yourself and
others! Read this manual and familiarize yourself with
the contents. Always wear eye and hearing protection
when operating this unit.
Part Number 82014 Rev.3/07

ページ2に含まれる内容の要旨

Introduction Attention Statements Read and follow this The Shindaiwa 510 Series hand held Throughout this manual are special operators manual. power equipment has been designed and “Attention Statements”. Failure to do so could result in serious injury. built to deliver superior performance and WARNING! reliability without compromise to quality, Wear eye and hearing protection at all times comfort, safety or durability. A statement preceded by the during the operation Shindaiwa engines

ページ3に含まれる内容の要旨

Safety Instructions Work Safely WARNING! Shindaiwa trimmers operate at very Minimize the Risk of Fire high speeds and can do serious damage or injury if they are misused or abused. Fuel leaks must be repaired before using NEVER smoke or light fires near Never allow a person without training or the unit. the engine. instruction to operate this unit! ALWAYS move the unit to a place well ALWAYS stop the engine and allow it to away from a fuel storage area or other cool before refueling

ページ4に含まれる内容の要旨

Be Aware of the Working Environment Make sure bystanders or Avoid long-term operation observers outside the 50- in very hot or very cold foot “danger zone” wear eye weather. protection. 50 FEET Reduce the risk of bystanders being struck by flying debris. Make sure no one is within 50 feet (15 meters)—that’s about 16 paces—of an When operating in rocky terrain operating attachment. or near electric wires or fences, use extreme caution to avoid contacting such items with the cutti

ページ5に含まれる内容の要旨

Product Description Using the accompanying illustrations as T2510 TRIMMER a guide, familiarize yourself with this unit Throttle and its various components. See Figure 4. Interlock Grip Understanding your unit helps ensure top Ignition performance, long service life, and safer Switch Handle operation. WARNING! Fuel Tank Do not make unauthorized Outer Tube Throttle modifications or alterations to any of Trigger these units or their components. Gear case Cutting T2510X TRIMMER IMPORTANT! Thr

ページ6に含まれる内容の要旨

Assembly and Adjustments Handle Handle Barrier Handle Bar Handle 1. The handle is attached to the outer tube at the factory and positioned vertically. Handle Positioning Label See Figure 5. . Loosen the 4 socket-head cap screws on the handle and rotate the handle 90 degrees. See Figure 5A. 3. Position the handle forward of the Handle Positioning Label at the best Outer Tube Outer position for operator comfort (usually Tube about 10 inches ahead of the throttle housing). Barrier Bar

ページ7に含まれる内容の要旨

Assembly and Adjustments Cutting Attachment Shield Socket- T2510 Head Cap Outer T2510X Bolt Cutting Screw Tube Upper Clamp Attachment Bracket Shield Shim Shim Nuts Clamp Screw Shim Line Cutter Shim Cutting Nut Attachment Retaining Mounting Cutting Attachment Shield Nut Hex Plate Figure 9A Screws Figure 9 Install the Cutting Attachment 3. Tighten the four socket-head cap Cutting Attachment Shield screws to secure the cutting attachment Shield T2510/T2510X. shield. 1. Insert the cuttin

ページ8に含まれる内容の要旨

Assembly Blade T2510X Slide the safety clip off-center Mount the Saw Blade. Shaft Bolt Turn the T510X upside down so the gear case output shaft is facing UP and remove Bolt Guard the shaft bolt, bolt guard and holder B from the gear case shaft. Output Holder B Shaft 1. Align the hole in blade holder A with the matching hole in the gear case Gear Shaft flange and then temporarily lock the Safety Safety Clip output shaft by inserting a hex wrench Clip through both holes. See Figure 1

ページ9に含まれる内容の要旨

Mixing Fuel Examples of 50:1 mixing quantities CAUTION! CAUTION! n 1 gallon of gasoline to .6 oz. mixing oil This engine is designed to operate on Some types of gasoline contain a 50:1 mixture consisting of unleaded n 5 liters of gasoline to 100 ml. mixing oil alcohol as an oxygenate. Oxygenated gasoline and ISO-L-EGD or JASO FC gasoline may cause increased IMPORTANT! class 2-cycle mixing oil only. Use of operating temperatures. Under Mix only enough fuel for your immediate needs! non-a

ページ10に含まれる内容の要旨

Starting the Engine (continued) When the Engine Starts... WARNING! WARNING! n After the engine starts, allow the engine Never start the engine from The cutting attachment may to warm up at idle  or 3 minutes before the operating position. rotate when the engine is started! operating the unit. 6. When the engine starts, slowly move the 7. Operating the throttle will automatically n After the engine is warm, pick choke lever to the “OPEN” position. See disengage the fast idle setting.

ページ11に含まれる内容の要旨

Checking Unit Condition NEVER operate the unit with the cutting ALWAYS make sure the cutting ALWAYS stop the engine immediately and attachment shield or other protective attachment is properly installed and firmly check for damage if you strike a foreign devices removed! tightened before operation. object or if the unit becomes tangled. Do not operate with broken or damaged NEVER use a cracked or warped cutting WARNING! equipment. attachment: replace it with a serviceable A cutting attachm

ページ12に含まれる内容の要旨

T U C T O N Using a Blade T2510X Blade Thrust Engine Operating Speeds WARNING! ‘Blade thrust’ is a sudden sideways or Operate the unit at full throttle while backward motion of the brushcutter. Such cutting. Best fuel efficiency is obtained by n Before working with a blade- motion may occur when the blade jams or releasing the throttle when swinging back equipped unit, always inspect catches on an object such as a sapling tree after a cut. and clean the area of objects that or tree stump. B

ページ13に含まれる内容の要旨

General Maintenance IMPORTANT! NOTE: WARNING! Using non-standard replacement MAINTENANCE, REPLACEMENT Before performing any parts could invalidate your Shindaiwa OR REPAIR OF EMISSION CONTROL maintenance, repair or cleaning work warranty. DEVICES AND SYSTEMS MAY on the unit, make sure the engine and BE PERFORMED BY ANY REPAIR cutting attachment are completely Muffler ESTABLISHMENT OR INDIVIDUAL; stopped. Disconnect the spark plug This unit must never be operated with a HOWEVER, WAR

ページ14に含まれる内容の要旨

10/15-Hour Maintenance Every 10 to 15 hours of operation: n Remove and clean the spark plug. Adjust Clean the spark plug the spark plug electrode gap to 0.04 and check the gap at 0.024–0.028 inch 0.08 inch (0.6-0.7 mm). If the spark the electrode. (0.6–0.7 mm) plug must be replaced, use only an NGK CMR5H or equivalent resistor type spark plug of the correct heat range. See Figure 9. NOTE: The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC). Figure 29

ページ15に含まれる内容の要旨

139/150-Hour Maintenance NOTE: n Replace the spark plug annually: Use Maintenance after first 139-hours, The NGK CMR5H also meets the require- only NGK CMR5H or equivalent resistor then every 150-hours thereafter. ments for electro magnetic compliance (EMC). type spark plug of the correct heat n Combustion chamber should be range. Set spark plug electrode gap to decarbonized, and the valve clearance 0.04-0.08 inch (0.6 -0.7 mm). should be adjusted. It is highly recommended that this is

ページ16に含まれる内容の要旨

Long Term Storage Whenever the unit will not be used for n Remove the spark plug and pour about CAUTION! 1/4 ounce of -cycle mixing oil into the 30 days or longer, use the following Gasoline stored in the carburetor cylinder through the spark plug hole. procedures to prepare it for storage: for extended periods can cause hard Slowly pull the recoil starter  or 3 times n Clean external parts thoroughly. starting and could also lead to so oil will evenly coat the interior of the incr

ページ17に含まれる内容の要旨

Troubleshooting Guide ENGINE DOES NOT START What To Check Possible Cause Remedy Faulty recoil starter. NO Fluid in the crankcase. Consult with an authorized servicing dealer. Internal damage. YES Loose spark plug. Tighten and re-test. NO Excess wear on cylinder, piston, rings. Consult with an authorized servicing dealer. Valves not seating. YES Fuel incorrect, stale or contaminated; Refill with fresh, clean unleaded gasoline with NO mixture incorrect. a pump octane of 87 or higher mixed wi

ページ18に含まれる内容の要旨

Troubleshooting Guide (continued) ADDITIONAL PROBLEMS Symptom Possible Cause Remedy Clogged air filter. Clean the air filter. Poor acceleration. Clogged fuel filter. Replace the fuel filter. Lean fuel/air mixture. Consult with an authorized servicing dealer. -1 Idle speed set too low. Adjust: 3,200 (±300) RPM (min ). Switch turned off. Reset the switch and restart. Engine stops abruptly. Fuel tank empty. Refuel. See page 9. Clogged fuel filter. Replace fuel filter. Water in the fuel. Drain; repl

ページ19に含まれる内容の要旨

The following statement only applies to United States and its territories Shindaiwa Corporation Federal Emission Design And Defect Limited Warranty Utility And Lawn And Garden Engines Shindaiwa Corporation warrants to the initial purchaser and each MAINTENANCE AND REPAIR REQUIREMENTS subsequent owner, that this utility equipment engine (herein You are responsible for the proper use and maintenance of the engine. engine) is designed, built and equipped to conform at the time of You should ke

ページ20に含まれる内容の要旨

NOTES © 2008 Shindaiwa Inc. Shindaiwa Inc. Shindaiwa Corporation 11975 SW Herman Rd. 6-2-11, Ozuka-Nishi, Part Number 82014 Tualatin, Oregon 97062 Asaminami-Ku, Hiroshima Revision 3/07 U.S.A. 731-3167, Japan Shindaiwa is a registered trademark of Telephone: 503 692-3070 Telephone: 81-82-849-2220 Shindaiwa, Inc. Fax: 503 692-6696 Fax: 81-82-849-2481 Specifications subject to change without notice. www.shindaiwa.com


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Shindaiwa 63848-94010 取扱説明書 トリマー 14
2 Shindaiwa 80844 取扱説明書 トリマー 8
3 Shindaiwa 80974 取扱説明書 トリマー 3
4 Shindaiwa 68800-94313 取扱説明書 トリマー 2
5 Shindaiwa 80775 取扱説明書 トリマー 0
6 Shindaiwa 81601 取扱説明書 トリマー 1
7 Shindaiwa 81606 取扱説明書 トリマー 0
8 Shindaiwa 81372 取扱説明書 トリマー 0
9 Shindaiwa 81010 取扱説明書 トリマー 0
10 Shindaiwa 81605 取扱説明書 トリマー 0
11 Shindaiwa 81646 取扱説明書 トリマー 0
12 Shindaiwa 81643 取扱説明書 トリマー 0
13 Shindaiwa 81642 取扱説明書 トリマー 0
14 Shindaiwa 82014 取扱説明書 トリマー 0
15 Shindaiwa 89309 取扱説明書 トリマー 0
16 Sony PCS-G70P 取扱説明書 トリマー 12
17 Sony PCS-G70 取扱説明書 トリマー 12
18 ABC Office 440 取扱説明書 トリマー 2
19 Sony 370A 取扱説明書 トリマー 83
20 ABC Office 448 取扱説明書 トリマー 2