ページ1に含まれる内容の要旨
OPERATOR'S MANUAL
30cc String Trimmers
and Brushcutters
OE
ss30
RY30542/RY30943
BC30
RY30562/RY30963
Your new trimmer
has been engineered and manufactured
to our high standard for dependability, ease of operation,
operator safety. Properly cared for, give you years
it will of rugged, trouble-free performance.
A WnnrulruG:
To reduce the risk of injury, the user must read and
understand the operator,s manual before
using this product.
Thank you for your purchase.
ページ2に含まれる内容の要旨
r Do not touch area around the muffler or cylinder of the I A wmuruc, unit, these parts get hot from operation. Rules " ' I Safety General Read and instructions. r Always understand all Failure to follow all stop the engine and remove the spark plug wire Rules ' I SafetY " Specific instructions listed below may result in electric shock, fire before making any adjustments repairs or except for and/or personal serious injury. carburetor adjustments. Wear your protective I Symbols equip
ページ3に含まれる内容の要旨
make I Replace any blade that has been damaged. Always RULES FOR TRIMMER SAFETY Some of the product. following symbols may be used on this Please study them and learn their meaning for SPECIFIC safe is installed conectly and securely fastened sure blade operation this product. of USE Failure to do so can cause serious before each use. head if cracked, chipped, or damaged string SYMBOL Replace NAME EXPLANATION r inJury. properly Be sure the string head or blade is way. in any replacem
ページ4に含まれる内容の要旨
PRODUCT SPECIFICATIONS with this product. words and meanings are intended to explain the levels of risk associated foltowing signal The Weight (without - fuel) cs30............,..,. SIGNAL MEANING .................1 0.7 lbs. SYMBOL QQEN ..........,......12.1 tbs. situation', which' if not avoided', wirr resurt DANGER: String cutting width A il*:fi'"::Jffiiill[.n*"'0"'s cs30..............,.. sqqn which' ir not avoided' courd resurt wARNTNG: A lli::fi'"?#fil#rf*t"'situation' Blade cutt
ページ5に含まれる内容の要旨
KNOW YOUR STRING TRIMMER GRASS DEFLECTOR GRIP STARTER See Figures 1a - 1c. ROPE The trimmer includes a grass deflector that helps protect AND The safe use of this product requires you an understanding of from flying debris. REAR the information on the tool and in this HANDLE operator's manual as TOP-MOUNTED MOTOR well as a knowledge project you of the are attempting. Before TRIGGER use of this produci, yourself L()CK familiarize with all operating The top-mounted motor improves balance and
ページ6に含まれる内容の要旨
THE FRONT ATTACHING HANDLE CS3O AND THE POWER HEAD TO THE - INSTALLING SS3O ATTACHMENT See Figure 4. Figure 2. See I Remove 2 wing nuts, 2 bolts, and clamp from the front handle. wRnulruc' A r Install the front handle onto the too side of the drive shaft remove, or adjust install, any attachment while Never housing and move it to a comfortable position. power is running. Failure to head stop the engine can I Place the through bolt the front handle. personal injury. serious cause NO
ページ7に含まれる内容の要旨
fl rl ATTACHING THE SHOULDER HARNESS - DEFLECTOR THE GRASS ATTACHING HEX BC30 :1 SCREW Figure See 9. i unrulnc' A ,t I Connect the latch on the shoulder harness to the strap grass line cutting blade on the deflector is sharp. T: The hanger. 'ah' contact with the blade. Failure to avoid contact Avoid r Adjust the to a comfortable position. strap ri \ in serious personal injury. can result \ BRACKET FROM BRUSHCUTTER TO CONVERTING STRING TRIMMER BC3O ATTACH THE CURVED SHAFT GRASS - TO
ページ8に含まれる内容の要旨
TRIMMER FUELING AND REFUELING THE THE STRAIGHT REMOVING SHAFT GRASS A wnnnrnc' DEFLECTOR AND STRING HEAD MIXTURE FUEL FLANGED WASHER Figures 10 - 13. To avoid burns from hot surfaces, never operate unit with See product powered This is by a 2-cycle engine and requires the bottom of the enoine above waist level. I Align the slot in the flanged washer gaso- with the slot in the pre-mixing gasoline and 2-cycle oil. Pre-mix unleaded gear neao. line and 2-cycle engine oil in a clean 1 gallon co
ページ9に含まれる内容の要旨
I Inspect and clear the area of any hidden objects such as OPERATING THE BRUSHCUTTER SHAFT TRIMMER CURVED glass, wire, wood, metal, etc. rocks, concrete, fencing, See Figures 19 - 20. wnnrulruc' A r posts, your Never use blades near sidewalks, fencing, build- Hold the brushcuiter with right hand on the rear handle trimmer away from hold the string the body keep- Always DANGER()US your "J" ings or other immovable objects. and the hand on the Barrier Handle. Keep a firm the body product. cl
ページ10に含まれる内容の要旨
AND STOPPING STARTING wnnrurruc' 21 - 23. See Figures I PRIMER BULI parts. When servicing, use only identical replacement START A COLD ENGINE: TO pads Use of any other may create a hazard or cause the throttle trigger until the engine starts DO NOT squeeze dil^+ drm.^a ^r ano runs. r Lay the trimmer on a flat, bare surface. primer r the bulb 7 times. wnnuHc' PRIME - Press A posiiion. r SET the start lever to the START goggles glasses Always wear safety or safety with side Fig.24 shield
ページ11に含まれる内容の要旨
REPLACING AND CLEANING AIR FIITER REPLACEMENT STRING See Figures 29 - 30. AIR FILTER C(IVER 26 - 28' Figures See proper performance For and long life, keep air filter clean. plug wire. Hold disconnect the spark r Stop the engine and SPOOL I Remove the air filter cover by pushing down on the latch clockwise to and turn the spool retainer string head the \ with your thumb while gently pulling on the cover. remove. I Remove the air filter and clean it in warm soapy water. head. \\ the spoo
ページ12に含まれる内容の要旨
DEALER. IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE SERVICE DEALER' AUTHORIZED YOUR THE PROBLEM CONTACT DO NOT SOLVE SOLUTIONS IF THESE SOLUTION PROBLEM POSSIBLE CAUSE SOLUTION CAUSE POSSIBLE 1. Clean threads and lubricate with grease - if no Soool retainer hard to turn dirty or PROBLEM 1. Screw threads are improvement, replace the spool retainer. damaged. plug. Reattac Remove spark spark. 1. Check will not start Engine plug on plug and lay spark cap
ページ13に含まれる内容の要旨
THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS, Carburetor, Carburetor - Spark Plugs, A. Tune-ups STATEMENT WARRANW LIMITED lgnition, Filters Adjustments, TECHTRONIC INDUSTRIES NORTH AMERICA, INC., LIMITED WARRANTY the STATEMENT FOR FEDERAL America, Inc., warrants to Industries North Techtronic Spools, Cutting AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF.ROAD ENGINES Bump Knobs, Outer
ページ14に含まれる内容の要旨
MANUAL MANUEL D'UTILISATION OPERATOR'S D Taille-bordures Brushcutters d ligne et and Trimmers String 30cc o -'l D o il'r d6broussailleuses r,11 de 30 cc RY30522/RY30923 cs3o - RY3o542/RY30943 ss3o - BCSo RY30562/RY30963 - ss30 RY30542/RY30943 BC30 to california state of to the known product contains chemicals this exhaust from RY30562/RY30963 The engine harm' reproductive or other birth defects i"n""t, "uu"" O AND SERVICE PARTS your model parts' please obtain replacement
