ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Table of Contents Table of Contents Product Overview ........................................................4 Image Settings ............................................28 Package Contents....................................................4 Setup > Video ..................................................29 System Requirements .............................................4 Video Configuration ....................................29 Introduction ...................................................
ページ3に含まれる内容の要旨
Table of Contents Networking Basics ....................................................62 Check your IP address ..........................................62 Statically Assign an IP address .............................63 Technical Specifications ...........................................64 Contacting Technical Support ..................................66 Warranty .....................................................................67 Registration ...............................................
ページ4に含まれる内容の要旨
Section 1 - Product Overview Product Overview Package Contents • DCS-910/920 Internet Camera • CAT5 Ethernet Cable • Power Adapter • Antenna (available only for the DCS-920) • Manual and Software on CD • Quick Install Guide • Camera Stand Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements ® • Computer with W
ページ5に含まれる内容の要旨
Section 1 - Product Overview Introduction Congratulations on your purchase of the DCS-910/920 Internet Camera! The DCS-910/920 is a versatile and unique solution for your small office or home. Unlike a PC Camera, the DCS-910/920 is a stand-alone system with a built-in CPU that transmits high quality video images for monitoring. The DCS-910/920 can be remotely accessed, and controlled using a Web browser over the Intranet or Internet. The simple installation procedure and intuitive Web-based
ページ6に含まれる内容の要旨
Section 1 - Product Overview Features • Simple to Use: The DCS-910/920 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-910/920 supports both ActiveX mode for Internet Explorer ™ and Java mode for Internet Explorer and Netscape Navigator . • Supports a Variety of Platforms: Supporting TCP/IP networking, HTTP, and other Internet related protocols. The DCS-910/920 can also be integrated easily into other Internet/Intr
ページ7に含まれる内容の要旨
Section 1 - Product Overview Hardware Overview Front View Wireless Antenna* Power and Link LED Camera Lens Camera Stand * Wireless Antenna is provided with the DCS-920 only. D-Link DCS-910/90 User Manual
ページ8に含まれる内容の要旨
Section 1 - Product Overview Rear View Wireless Antenna* Reset Ethernet Connector Power Connector Camera Stand * Wireless Antenna is provided with the DCS-920 only. D-Link DCS-910/90 User Manual
ページ9に含まれる内容の要旨
Section 1 - Product Overview Hardware Installation Attach the Antenna* Locate the antenna included with your DCS-920 and attach it to the antenna connector located on the back of the DCS-920. Note: It is required that an Ethernet cable is used during initial setup. Once your wireless configuration is set, you may disconnect the Ethernet cable and begin communicating wirelessly with your DCS-920. Attach the Swivel Stand Locate the stand mount on the back panel of the DCS-910/920 and screw on
ページ10に含まれる内容の要旨
Section 1 - Product Overview Attach the External Power Supply Attach the external power supply to the DC power input connector located on the bottom panel of the DCS-910/920 and connect it to your local power supply. Note: Power source is confirmed when the red LED Power Indicator located below the lens on the DCS-910/920 is illuminated. The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet Camera back panel socket cavity. Attach the
ページ11に含まれる内容の要旨
Section - Installation Installation Wireless Installation Considerations The D-Link Wireless* Internet Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or
ページ12に含まれる内容の要旨
Section - Installation Software Installation Turn on the computer and Insert the D-Link DCS-910/920 Driver CD in the CD-ROM drive. The following step-by-step ® instructions will be shown in Windows XP. The similar steps and screens will be shown for other Windows operating systems. Click Setup Wizard If the CD Autorun function does not automatically start on your computer, click Windows Start > Run. In the Run command box type “D:\DCS910920.exe”, where D: represents the drive letter of you
ページ13に含まれる内容の要旨
Section - Installation Click Next to continue. Click Next Click Yes to accept the License Agreement. Click Yes D-Link DCS-910/90 User Manual 1
ページ14に含まれる内容の要旨
Section - Installation To start the installation click Next. Note: The installation may take several minutes to complete. Click Next Please wait while the Setup Wizard is being installed. D-Link DCS-910/90 User Manual 1
ページ15に含まれる内容の要旨
Section - Installation Click Finish to complete the installation. Click Finish D-Link DCS-910/90 User Manual 1
ページ16に含まれる内容の要旨
Section - Installation Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. The Setup Wizard will appear and display the MAC address of the DCS-910/920, and an IP Address (which may or may not be correct depending on what you have your DCS-910/920 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here. Note: A DHCP server is a device that supplies IP addresses to your network devices automatically. D-Link
ページ17に含まれる内容の要旨
Section - Configuration Configuration This section will show you how to configure your new D-Link Internet camera using the D-Link Setup Wizard SE. Setup Wizard The following options are available on the Installation Wizard screen: Your camera’s IP Address will be displayed along with its corresponding MAC Address here. Your camera’s IP Address will be displayed here along with its corresponding MAC Address. Click Wizard D-Link DCS-910/90 User Manual 1
ページ18に含まれる内容の要旨
Section - Configuration Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank. Click Next Select DHCP if you want to obtain a new IP address every time the camera boots up, or select static IP to use the same IP address at each boot up. Click Next Enable wireless settings and enter your wireless network information. Select your wireless security settings, and click Next. Note: Wireless is available only for the DCS-920. Click Next D-Link DCS-910/90
ページ19に含まれる内容の要旨
Section - Configuration Enter your wireless encryption key and click Next. Note: Wireless is available only for the DCS-920. Click Next If you need to make any changes, click Back to modify your settings. Otherwise, click Restart to save and apply your settings. Note: Wireless is available only for the DCS-920. Click Restart D-Link DCS-910/90 User Manual 19
ページ20に含まれる内容の要旨
Section - Configuration Viewing Your Internet Camera Your setup is now completed! Click Link to launch the Web page of your camera, and view the images using your Web browser. Click Link The Setup Wizard will automatically open your web browser to the IP address of the DCS-910/920, in this example it is: http://192.198.0.102. Your DCS-910/920 may have a different IP Address. Enter admin as the default username and leave the password blank. Click OK to continue. D-Link DCS-910/90 User Manu
