ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
®
IMPORTANT INFORMATION
Read before use
& retain for future reference
ページ2に含まれる内容の要旨
CONTENTS 1 Carton Contents A handle bolt steady handle handle knob guard screws fixing plugs instruction manual wall bracket Integrated battery charger guarantee card scraper tool LIST OF INSTRUCTION MANUAL CONTENTS CONTENTS (1) IMPORTANT ! SAFETY (2-4) Please check the contents of the carton are ASSEMBLY correct BEFORE assembling your new Flymo & ADJUSTMENT (5-7) product. USE (8) IF ANY PARTS ARE MISSING CONTACT:- MAINTENANCE (9-10) Flymo/Partner Customer Service Department direct Telephone
ページ3に含まれる内容の要旨
360º 2 If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer. The operator is responsible for following the warning and safety instructions in this manual and on the trimmer. Explanation of Symbols General on the Cordless Trimmer 1. Never allow children or people unfamiliar with these instructions to use the trimm
ページ4に含まれる内容の要旨
SAFETY 3 11. Do not attempt to repair the unit including Maintenance and storage the battery. Nylon line replacement and 1. Keep all nuts, bolts and screws tight to be cleaning the unit are the only items suitable sure the trimmer is in safe working for user maintenance. condition. 12. Do not insert any object into the motor area. 2. Replace worn or damaged parts for safety. Keep free of debris to avoid overheating. 3. Only use the replacement cutting line 13. Do not incinerate or mutilate the
ページ5に含まれる内容の要旨
4 Battery Care Bench Top Re-charging 1. If over a period of time the battery quickly The wall bracket can also be used as a runs down after a full 24 hour charging "bench top" stand for re-charging your period, a replacement battery is needed. cordless trimmer. 2. There will be some charge present in the Winter Storage battery but to ensure maximum running 1. Fully charge for 24 hours before winter time, recharge your trimmer for 24 hours storage. before use. 2. If you are unable to leave your c
ページ6に含まれる内容の要旨
ASSEMBLY 5 Product Rating Label Your product is uniquely identified by a B Product Number . . . . . . . . . . . . . . . . . silver and black product rating label. To ensure you have full product Model Number. . . . . . . . . . . . . . . . . . . information when obtaining spares or advice from one of our approved service centres, or if you need to contact our Serial Number . . . . . . . . . . . . . . . . . . . customer service department, you should make a note in the space provided of the D
ページ7に含まれる内容の要旨
6 Fitting the wall bracket • IMPORTANT ! G Switch charger off at the wall socket before connecting or disconnecting the trimmer to the wall bracket. 1 1. It is recommended that the wall bracket (G2) should be mounted on a smooth, vertical and internal wall which is strong enough to hold the weight of the product, in a well ventilated area between 5°C and 25°C. 2. There are 3 holes on the wall bracket. Position the wall bracket with the two holes at the top. See Fig H. 2 3. Ensure that when the
ページ8に含まれる内容の要旨
ADJUSTMENT 7 Handle Adjustment bolt I 1. Attach steady handle to product using bolt and handle knob as shown in Fig I. 2. Adjust the steady handle to a comfortable handle operating position, see Fig J., by knob unscrewing the handle knob, springing the side lugs apart, moving the handle to the required position, carefully re-engaging the J K teeth and then tightening the handle knob. See Fig K. Auto Line Feed System How the automatic line feed works (L) L 1. A short length of new line is fed out
ページ9に含まれる内容の要旨
8 How to trim and edge To start your trimmer 1 M N 1. Hold as illustrated in Fig M. 2. To start, press lock-off button (M1), squeeze the switch lever (M2), release lock-off button. How to trim 2 1. Cut with nylon line at an angle using the tip. See Fig N 2. Swing trimmer in and out of the cutting area taking small cuts (O) 3. Line is fed out automatically every time the O trimmer head stops rotating and returns to operating speed. • Extra line can be fed out manually as described on page 9. 4. T
ページ10に含まれる内容の要旨
MAINTENANCE 9 Nylon Line To manually feed the nylon line V If required, line can be fed out manually. To operate, gently pull on the line whilst at the same time alternately pressing and releasing the button, on the side of the spoolholder. See fig V. To replace nylon line. Replacement nylon line is available from most Flymo/Partner stockists. Do not depress the button more than three times. You can buy it either as spool and line Excessive line will snag the line cutter and cause complete, or
ページ11に含まれる内容の要旨
10 Fault Finding Hints & Service Recommendations Fault Finding Hints Service Recommendations 1. Always use genuine Flymo Spare Parts. 1. Line too short 2. Prepacked spares are available from Manually feed out the line. most Flymo/Partner stockists. 3. If you have a problem with your machine contact your local Approved Service 2. Line broken inside cutting head Centre ensuring you have full details of Remove cap and re-thread line. your product as described on the product rating label. 3. Line j
ページ12に含まれる内容の要旨
11 Guarantee & Guarantee Policy If any part is found to be defective due to faulty Failures due to the following are not covered, manufacture within one year of original therefore it is important that you read the purchase, Flymo/Partner, through its Authorised instructions contained in this Operator's Manual Service Repairers will effect the repair or and understand how to operate and maintain replacement to the customer free of charge your machine: providing: Failures not covered by guarantee
ページ13に含まれる内容の要旨
12 Environmental Information Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. • Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling. • Awareness of the environment must be considered when dispo
ページ14に含まれる内容の要旨
Certificate of Conformity I, THE UNDERSIGNED P. HOWELLS OF ELECTROLUX OUTDOOR PRODUCTS, AYCLIFFE INDUSTRIAL ESTATE, NEWTON AYCLIFFE, COUNTY DURHAM DL5 6UP ENGLAND Certify that the Trimmer 1. Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electric 2. Make . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flymo Conforms to the specifications of Directive 84/538/EEC/ Type of Cutting Device . .
ページ15に含まれる内容の要旨
The use of eye protection is recommended to protect against objects thrown by the cutting line. Flymo Safety Glasses are available from most leading stockists GUIDE PRICE GUIDE PRICE ONLY £3.49 ONLY £3.49 Contact your nearest stockist or telephone (01325) 300303 for more details Electrolux Outdoor Products Aycliffe Industrial Estate NEWTON AYCLIFFE Co.Durham DL5 6UP ENGLAND Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339 UK Customer Helpline - 01325 300303 Fax - 01325 310339 Our po
