ページ1に含まれる内容の要旨
Instruction Manual
IWTS-14 SR and 30 SR
High Performance In-Wall Surround Speakers
DIPOLE/THX
BIPOLE
IWTS-14 SR
IWTS-14 SR
DIPOLE/THX
BIPOLE
IWTS-30 SR
IWTS-30 SR
ページ2に含まれる内容の要旨
Table of Contents 2 IWTS-14 SR and 30 SR High Performance In-Wall Surround Speakers Table of Contents IWTS-14 SR and IWTS-30 SR High Performance In-Wall Surround Speakers 2 Unpacking the Speakers 3 Speaker Descriptions 3 IWTS-14 SR and 30 SR Thank you for choosing Atlantic Technology products. Y our new speaker 4 Speaker Setup components are precision-crafted to give you years of enjoyable, trouble-free 4 Dipole/Bipole Operation of the IWTS SR Speakers service. This manual covers the A
ページ3に含まれる内容の要旨
Speaker Descriptions 3 Instruction Manual Speaker Descriptions Figure 1 IWTS-14 SR and 30 SR The IWTS-14 SR and IWTS-30 SR are in-wall surround speakers that deliver spacious, enveloping surround effects for top-grade home theater systems. They feature two angled banks of drivers facing front and rear that fill the listening area with the three-dimensional ambient sound essential for convincing, lifelike theater sound. DIPOLE/THX BIPOLE Both speakers incorporate dual woofers (4½” in the 14 S
ページ4に含まれる内容の要旨
4 Speaker Setup IWTS-14 SR and 30 SR High Performance In-Wall Surround Speakers Surround Effects and SR Speaker Locations Speaker Setup The IWTS SR’s shape allows great flexibility in placement. Due to their swit- Dipole/Bipole Operation of the IWTS SR Speakers chable Dipole/Bipole design, it’s possible to place the speakers almost any- where within the rear third of the room and get good results. However, the In Dipole mode the IWTS SRs produce ambience with DIPOLE/THX best location for surro
ページ5に含まれる内容の要旨
Speaker Placement 5 Instruction Manual Speaker Placement Front Speaker Array should be placed as close to ear level as possible. Place the Left and Right speakers about 6-10 feet apart. Subwoofer placement is dependent on room size and shape. Left Center Right Experiment to find a location that produces the Surround Speakers smoothest response. should be placed directly to the sides of the seating area and approximately 3 feet above the listener’s Subwoofer ear level. Dipole is b
ページ6に含まれる内容の要旨
6 Speaker Installation IWTS-14 SR and 30 SR High Performance In-Wall Surround Speakers Removing and Installing the Grille Speaker Installation Remove the grille from the speaker using an awl or the point of a drywall NOTE: We always recommend a professional be involved in the instal- screw in a grille opening near one of the grille corners. Slowly pry the grille lation of the IWTS SRs. out, being careful not to damage the speaker’s frame or its finish. Installation of the IWTS SRs in New Cons
ページ7に含まれる内容の要旨
Speaker Wiring 7 Instruction Manual Installing the Speaker Assembly Speaker Connection The clamping mechanism allows the wall material to range from ½" to 1½" (13 to 38 mm) in thickness. There must be a minimum depth 5 behind the wall face of 3 ⁄ 8” (92 mm). As noted above, be sure to keep the top and bot- tom of the cutout at least 1½" (38mm) away from obstruc- tions, as the rotating clamps will not operate properly if you don’t. Insert the speaker into the cutout and using a level
ページ8に含まれる内容の要旨
343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.com 015-1305