ページ1に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 1
Empowered by Innovation
Multibutton Telephone
User Guide
1093095
Rev 1, May 2006
Printed in U.S.A.
Using IntraMail Features to make you Answering and A Quick Tour of Setting Up Your
Voice Mail More Productive Placing Calls Your Telephone Telephone
ページ2に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 2 Installing the Handset And Line Cord When installing the handset: 1. Plug the handset cord into the handset jack on the bottom of the telephone. 2. The handset cord routes through the lower channel on the right side of the telephone base. 3. The line cord does not use a channel and drapes down from the telephone line cord jack or connects to the telephone legs. Adjusting the Two-Position Viewing Angle To set the low viewing angle position: 1. Fold t
ページ3に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 3 Removing and Reinstalling the Faceplate To remove the faceplate (if installing a custom DESI label): 1. Put your finger in the recessed area under the faceplate and lift off the faceplate. To reinstall the faceplate: 1. Remove the old label, then insert the customized replacement DESI label. 2. Press down on the faceplate as shown. How To Use This Guide When using the instructions in this user guide, you: 1. Dial a digit on the key pad. For example:
ページ4に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 4 the Display and Soft Keys Alphanumeric Display While your phone is idle, the display shows: – The date and time, your name (see page 14), and your extension number. – The idle menu soft key functions. Menu Push to set up features on your phone (such as Call Forwarding). Dir Push to call a co-worker on the Intercom by selecting their name. VM:xx Push to call your voice mailbox (xx is the number of new messages). CL:xx Push to review your Caller ID l
ページ5に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 5 Understanding the Ring/Message Lamp The Ring/Message Lamp – Two quick flashes (green): You have new (unreviewed) calls in your Caller ID log. – Slow flash (green): A call is ringing your phone. – Fast flash (red): There are new voice mail messages in your mailbox. Setting Up Your Speed Dial Bin Keys To store a Personal Speed Dial number in a bin key: – Push Menu + Spd + Press bin key + HOLD + Dial line number (e.g., 1) on which the stored number sh
ページ6に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 6 Outside Calls To answer an outside call: 1. Lift the handset. 2. If you are not automatically connected, press flashing line key. – If you hear a call ringing a co-worker, dial ** and their extension number to pick it up. To place an outside call: 1. Press a line key (normally located on your first two rows of Feature Keys). 2. Wait for outside dial tone, then dial your outside number. OR 1. Press INTERCOM. 2. Dial 9. – You may also be able to dial o
ページ7に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 7 Intercom Calls To And From Co-Workers To answer an Intercom call from a co-worker: 1. Do one of the following: – If you hear two beeps, speak toward your phone. – If you hear Intercom ringing, lift the handset. To dial a co-worker over the Intercom: 1. Press INTERCOM. 2. Dial your co-worker’s extension number. – If you hear Intercom ringing, wait for your co-worker to answer. – If you hear two beeps, your call has voice-announced. Go ahead and speak.
ページ8に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 8 Place A Call On Hold To place your call on System (Regular) Hold: (Your co-workers can pick up calls you place on System Hold.) 1. Press HOLD. – While an outside call is on Hold, the line key will flicker (green). – While an Intercom call is on Hold, your INTERCOM key will flicker (green). – A call you leave on Hold too long will recall to you. If you don’t answer the recall from an outside call, it will then ring your co-workers. – Your co-workers c
ページ9に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 9 Set Up A Conference (Telephone Meeting) To set up a telephone meeting: 1. Place or answer your first call. 2. Press CONF. 3. Place or answer your next call. 4. Press CONF again to set up the Conference. – Repeat steps 2 through 4 to add additional callers to your Conference. – You can add either Intercom or outside callers. – If you hear an error tone after trying to add another party, your Conference is full. – To place a Conference on Hold, press H
ページ10に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 10 Dialing By Name (Directory Dialing) To dial a co-worker or outside call by selecting from a group of names: 1. Push Dir. 2. Select a Directory Dialing type: – To call a co-worker, push Ext. – To call a Personal Speed Dial number, push Pers. – To call a System Speed Dial number, push Cmpy. 3. Press a VOLUME key to scroll through the list of names. – Before pressing VOLUME, you can narrow your search by dialing the first letter of the name + 1, 2, or
ページ11に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 11 Change Ring Tones For Specific Feature Keys To turn Feature Key ringing on and off: (These steps apply to line keys, Call Coverage keys, and Group Call Pickup keys. See the Telephone Feature Handbook for more on setting up Feature Keys.) 1. Do one of the following: – For line keys, dial #RAL (#725). – For Call Coverage keys, dial #RAC (#722). – For Group Call Pickup keys, dial #RAP (#727). 2. Make a note of the Feature Key lamps. – The lamps in the
ページ12に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 12 Installing And Using a Headset To install an optional headset: 1. Plug the headset cord into the headset jack on the bot- tom of the telephone. 2. The headset cord routes through the upper channel on the right side of the telephone base. To set up a headset Feature Key: 1. Dial #KP (#57). 2. Press the Feature Key you want to assign + HOLD. 3. Press INTERCOM. – INTERCOM flashes (red). 4. Press a VOLUME key until you see HEADSET. 5. Press HOLD + SPEAK
ページ13に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 13 Using A DSS Console For more call handling power and flexibility, the DSS Console pro- vides 60 additional Feature Keys as well as three Speed Processing Keys along the bottom. (For more on setting up Feature Keys, see the Telephone Feature Handbook.) To use the Speed Processing Keys: The ANSWER Key 1. Press ANSWER to answer any call ringing your phone. The RELEASE Key 1. Press RELEASE to hang up (disconnect) your call. The TRANSFER Key 1. Press TRA
ページ14に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 14 Programming Your Extension’s Name To program your extension’s name: 1. Push Menu+ More+ More+ Name. 2. Enter the name following the Name Programming Chart below + Press HOLD. – Also use this procedure to program Personal Speed Dial names and Display Messages. Name Programming Chart Key 1 Press 2 Presses 3 Presses 4 Presses 5 Presses 6 Presses 7 Presses 8 Presses 9 Presses 1 & - / ‘ 1 2 A B C a b c 2 3 D E F d e f 3 4 G H I g h i 4 5 J K L j k l 5 6
ページ15に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 15 Additional User Programmable Features To program a feature, dial # and the feature’s code. For example, to enable incoming Paging, dial # + V P Y, then SPEAKER to hang up. Normally, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to extension 300. For more on the features, see the Telephone Feature Handbook. User Programmable Features Chart Feature Mnemonic Numeric Operation Call Forwarding Clear All #CC + Y to cle
ページ16に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 16 Calling (Logging Into) Your Mailbox Voice Mail lets callers leave recorded messages for you and lets you leave recorded messages for co-workers. Messages get stored in each person’s mailbox. To listen to your messages or use other voice mail features, you call your mailbox and access the Main Menu. When you have new messages, your Ring/Message lamp flashes (red) and your VM:xxsoft key shows the number of new messages. The Automated Attendant can ans
ページ17に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 17 Voice Mailbox Basics Review these basic features before using your mailbox for the first time. To record a greeting for your mailbox: (Callers hear your greeting before leaving you a message.) 1. Press V-MAIL or push VM:xx. 2. Push Greet. – If you want calls from your company’s Automated Attendant to go directly to your mailbox (with- out first ringing your phone), dial the letter O (6) before the next step. 3. Push Gr1, Gr2or Gr3to select which of
ページ18に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 18 More Mailbox Features When you log onto your mailbox, you get your mailbox main menu of options. These additional features are avail- able from your main menu. To record and send a message to a co-worker: 1. Press V-MAIL or push VM:xx. 2. Push Rec. 3. Enter the message recipient’s mailbox number. 4. Do one of the following: – To begin recording your message, push Cont. – To select a different message recipient, push Mbox. 5. Record your message and
ページ19に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 19 More Mailbox Features After listening to a message, to have voice mail announce the message sender, as well as the time and date the message was sent to you: 1. Press V-MAIL or push VM:xx. 2. Push Time. 3. Do one of the following: – Push Onto turn Auto Time Stamp on. – Push Offto turn Auto Time Stamp off. – Push Exitto exit without changing the current setting. To be notified (called) at your pager, cell phone, or home office when you have new messa
ページ20に含まれる内容の要旨
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 20 System Administrator Options The following administrative features are available only at the System Administrator’s extension (normally 300). See the IntraMail Feature Handbook for more on each of the underlined features. To use the System Administrator options: 1. At extension 300, press V-MAIL or push VM:xx. 2. Dial SA. 3. For the System Administrator recording and routing options, do one of the following: – To record an Instruction Menu message (
