ページ1に含まれる内容の要旨
Operating Instructions
Digital Cordless Phone
Model No.
KX-TG1701NZ
KX-TG1702NZ
KX-TG1701
Charge the batteries for about
10 hours before initial use.
Table of Contents
Introduction ................................................. 2
Preparation .................................................. 4
Useful Telephone Settings ....................... 10
Making / Answering Calls ......................... 12
Phonebook ................................................. 14
Caller ID Service ..............
ページ2に含まれる内容の要旨
Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Note: • In the event of problems, you should contact your equipment supplier in the first instance. Your phone KX-TG1701 KX-TG1702 2
ページ3に含まれる内容の要旨
Introduction Included accessories Quantity No. Accessory items KX-TG1701 KX-TG1702 1. AC adaptor for base unit 11 Part No. PQWATG1070AL 2. Telephone line cord 11 Rechargeable batteries AAA size 24 3. Part No. HHR-55AAAB or HHR-4EPT 4. Handset cover* 12 Charger 5. –1 Part No. PQWETGA107AL * The handset cover comes attached to the handset. 1. 2. 3. 4. 5. Note: � When replacing the batteries, use only 2 rechargeable AAA size nickel metal hydride (Ni-MH) batteries of capacity u
ページ4に含まれる内容の要旨
Preparation Warning: Important information � To prevent the risk of electrical shock, do not expose this product to rain or General any other type of moisture. � Use only the AC adaptor included with � Unplug this unit from power outlets if it this product, noted on page 3. emits smoke, an abnormal smell or � Do not connect the AC adaptor to any makes unusual noise. These AC outlet other than a standard 220- conditions can cause fire or electric 240 V AC outlet. shock. Confirm that smoke has � T
ページ5に含まれる内容の要旨
Preparation � The grant of a Telepermit for any item General warnings: of terminal equipment indicates only � This equipment will be inoperable that Telecom has accepted that the when mains power fails. item complies with minimum � When a failure occurs which results in conditions for connection to its the internal parts becoming network. It indicates no endorsement accessible, disconnect the power of the product by Telecom, nor does it supply cord immediately and return provide any sort of warr
ページ6に含まれる内容の要旨
Preparation � The unit will not work during a power failure. We recommend connecting a Connections standard telephone to the same telephone line or to the same telephone jack using a Base unit BT double adaptor. � The unit is not designed to be used with rotary (pulse dialling) services. Hook If you subscribe to an ADSL service � Please attach a noise filter (contact your ADSL service provider) to the telephone line between the base unit and the telephone line jack in the event of the following
ページ7に含まれる内容の要旨
Preparation Panasonic Ni-MH battery Battery installation performance Important: � Wipe the battery ends (+,–) with a dry When you charge the batteries for 10 cloth. hours from the battery empty status, the � Install the batteries without touching the following performance is available. battery ends (+,–) or the unit contacts. 1 Press the notch of the handset cover firmly Operation Operation time and slide it in the direction of the arrow. In continuous use 10 hours max.* In continuous 120 hours
ページ8に含まれる内容の要旨
Preparation Base unit Controls Handset 1 2 1. Charge contacts 2. [ ] Page Charger KX-TG1702 1 1. Receiver 2. Display 3. [ /C] Mute / Clear 1. Charge contacts 4. [ ] Talk 5. [ /INT] Phonebook / Intercom 6. [ / ] Volume down / Redial list 7. Charge contacts 8. [ /OK] Setting / OK 9. [ /CID] Volume up / Call log 10. [ ] Off 11. [R] Recall 12. Microphone 8
ページ9に含まれる内容の要旨
Preparation Meaning Icons Displays Displayed when you press Icons Meaning [ ] Handset within range of base Displayed when you press unit [ ] � When this icon is not displayed: out of range, no registration or no power on Displayed when you press base unit [R] Setting mode Displayed when you long press [0] Making or answering a call If the current handset number [ ] Incoming call is 2, “[2]” is displayed Intercom call in progress Displayed when you press and hold [INT]. Ringer volume is off Key
ページ10に含まれる内容の要旨
Useful Telephone Settings Guide to telephone settings For your reference, a chart of all items which can be customized for the telephone is printed below. Items Page Default setting Date and time Page 10 - 12 and 24-hour display format Page 10 24-hour Handset ringer tone Page 10 1 Handset ringer volume 5 Page 11 Handset key tone Page 11 On Auto talk Page 11 Off Recall time * Page 11 600ms PIN * 0000 Page 11 * You do not need to program the same item using another handset (for models with 2 or mo
ページ11に含まれる内容の要旨
Useful Telephone Settings Setting PIN Handset ringer volume Set the PIN to prevent others from 1 [ /OK] > [5] accidentally resetting the telephone 2 Press [ ] or [ ] to select handset settings. ringer volume. � Factory setting is “0000”. � 5 levels are available. � The handset plays the selected tone Changing to a new PIN at that volume while selecting. If you change the PIN, please write down 3 [ /OK] to save the setting. your new PIN as the unit will not reveal the PIN to you. 1 [ /OK] > [ ] H
ページ12に含まれる内容の要旨
Making / Answering Calls Making calls Answering calls 1 Predial the phone number > [ ] 1 Press [ ] to answer the call. � If you make a mistake while 2 When finished talking, press [ ] or predialling a phone number, press [C] place the handset on the base unit or to clear it. Press and hold [C] to clear charger. all inputs. Note: 2 When finished talking, press [ ] or � With Auto Talk function switched on, place the handset on the base unit or you can talk directly when the handset charger. is pic
ページ13に含まれる内容の要旨
Making / Answering Calls Redialling Silent mode The last 4 numbers dialled (each 20 To switch off ringer, press and hold [ ] until “ ” shows on the display. digits max.) are stored in the redial list. � When an incoming call is received, 1 [ / ] > Press [ ] or [ ] to select a only “ ” flashes on the display to desired number. indicate an incoming call. 2 Press [ ] to start redialling. To switch on ringer, press and hold [ ] Note: until “ ” disappears from the display. � If the number is more tha
ページ14に含まれる内容の要旨
Phonebook Adding entries to the phonebook The phonebook allows you to make calls without having to dial manually. You can add 10 phone numbers to the phonebook. 1 [ /OK] > [ ] 2 Press [ ] or [ ] to select a phonebook location (0-9). 3 Enter the party’s phone number (20 digits max.). 4 [ /OK] to save the phone number in the phonebook. Making calls 1 [ ] > Press [ ] or [ ] to display the desired entry. 2 [ ] Editing numbers 1 [ /OK] > [ ] 2 Press [ ] or [ ] to select a phonebook location (0-9). 3
ページ15に含まれる内容の要旨
Caller ID Service � The following will not be left in the call Using Caller ID service log: Important: -“-O-” (Out of area): The caller dialled from an area which does not provide � This unit is Caller ID compatible. To use Caller ID features (such as Caller ID service. displaying caller phone numbers), you -“-P-” (Private caller): The caller requested not to send caller must subscribe to Caller ID service. Consult your service provider/ information. -Caller information for the answered telephon
ページ16に含まれる内容の要旨
Multi-unit Operation (KX-TG1702) Intercom between Transferring an outside call handsets to handsets Intercom calls can be made between Example: When handset 1 transfers an handsets. outside call to handset 2 Example: When handset 1 calls handset 2 1 Handset 1: 1 Handset 1: During an outside call, press and hold Press and hold [INT] until “ ” shows [INT] until “ ” shows on the display. on the display. Press [2] (desired Press [2] (desired handset number). handset number). � The outside call wil
ページ17に含まれる内容の要旨
Useful Information Troubleshooting If you still have difficulities after following the instructions in this section, disconnect the base unit’s AC adaptor and remove the handset batteries. Then reconnect the AC adaptor and install the batteries. Problem Cause & Solution disappears. � The handset is too far from the base unit. Move closer. � The AC adaptor is not connected. Check the connections. � You are using the handset or base unit in an area with high electrical interference. Place the
ページ18に含まれる内容の要旨
Useful Information Problem Cause & Solution Noise is heard during a call. � You are using the handset or base unit in an area with high electrical interference. Place the handset and base unit away from interference sources, such as antennas and mobile phones. Pressing [ ] does not display/ dial � The redialled number was more than 20 digits long. the last number dialled. Redial the number manually. I tried to charge the batteries, but they � Make sure the charge contacts are not dirty an
ページ19に含まれる内容の要旨
Useful Information � Operating conditions: 5 °C–40 °C, Handset registration 20%–80 % relative air humidity (dry) The included handset and base unit are � Dimensions: preregistered. If is not shown on the Base unit: Approx. 47 mm × 116 mm × handset display when the unit is turned 107 mm on, the handset is not registered to the Handset: Approx. 142 mm × 34 mm × base unit. Register the handset. 47 mm *1 1 Base unit: Charger : Approx. 45 mm × 88 mm × Press and hold page button [ ] for 79 mm � Mass
ページ20に含まれる内容の要旨
Customer Support Centre Tel. No.: (09) 272 0178 Website: http://www.panasonic.co.nz Sales Department: Panasonic New Zealand Ltd. 350 Te Irirangi Drive East Tamaki Private Bag 14911 Panmure Auckland NEW ZEALAND Panasonic Communications Zhuhai Co., Ltd. 3 Ping Xi 8 Lu, Nanping Keji Gongye Yuan, Zhuhai, Guangdong, China 519060 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is pr