ページ1に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:26 Page 1
FP102
Hands Free Speaker Phone
with Pre-Programmed 5+15 Memory
Operating Guide
Feature•Phone Series
ページ2に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:26 Page 2 INTRODUCTION Congratulations on the purchase of your Uniden FP102 Telephone. The FP102 has been designed and engineered to exacting standards for reliability, long life and outstanding performance. To obtain the full benefit from your new telephone, please read this Operating Guide thoroughly. For your future reference, please fill in the panel below and attach your Purchase Receipt/Sales docket. Serial No. Date of purchase (found on the bottom of the unit)
ページ3に含まれる内容の要旨
CONTENTS FP102-OM.qxd 7/12/98 09:26 Page 3 CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Caring for your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . .6 Parts Ch
ページ4に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:26 Page 4 CONTENTS Receiving a Telephone Call . . . . . . . . . . . . . . . . . . . . . . . .18 Accessing Call Waiting (New Zealand Model only) . . . . . . .18 Accessing Call Waiting (Australian Model only) . . . . . . . . . .19 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Placing a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
IMPORTANT INFORMATION FP102-OM.qxd 7/12/98 09:26 Page 5 IMPORTANT INFORMATION When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth
ページ6に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:26 Page 6 IMPORTANT INFORMATION 9. Unplug this product and refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled into the product. B. If the product has been exposed to rain or water. C. If the product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage, and will
ページ7に含まれる内容の要旨
PARTS CHECKLIST FP102-OM.qxd 7/12/98 09:26 Page 7 PARTS CHECKLIST (For New Zealand Model) Base Unit Curly Cord Handset Telephone Line Cord Wall Mounting Bracket FP102 Hands Free Speaker Phone with Pre-Programmed 5+15 Memory Operating Guide Feature•Phone Series Memory Storage Card Operating Guide 2 x Wall Mounting Screws and Wall Plugs 7
ページ8に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 8 PARTS CHECKLIST (For Australian Model) Curly Cord Base Unit Handset Telephone Line Cord Wall Mounting Bracket and Plug FP102 Hands Free Speaker Phone with Pre-Programmed 5+15 Memory Operating Guide Feature•Phone Series Memory Storage Card 2 x Wall Mounting Operating Guide Screws and Wall Plugs 8 PARTS CHECKLIST
ページ9に含まれる内容の要旨
FEATURES FP102-OM.qxd 7/12/98 09:27 Page 9 FEATURES • Pre-Programmed Feature Buttons Instant access to some of Telecom’s / Telstra’s most popular network service features* have been factory programmed into this telephone for your convenience. * Some of these services will require subscription. • 15 One Touch Speed Dial Buttons Your most important numbers can be programmed into the memory, for one touch speed dialling. • HandsFree Speakerphone Great for the home or office when handsfree sp
ページ10に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 10 FEATURES • Last Number Redial If the number you are dialing is engaged, simply end the call. Then pickup the handset and press the redial button. The telephone will automatically redial the last number called. • Hearing Aid Compatible Inductive transducer coil handsets provide hearing aid compatibility. • Status LED Dual coloured LED provides visual indication and differentiation for calls 'In Use' or 'On Hold' or in ‘SpeakerPhone’ mode. • Call LED Bri
ページ11に含まれる内容の要旨
FUNCTIONS FP102-OM.qxd 7/12/98 09:27 Page 11 FUNCTIONS NEW ZEALAND MODELS 1. Button 2. Button 6 1 3. Button 2 4. Button 7 5. Button 3 6. One Touch Speed Dial Buttons 4 7. Memory Storage Card 5 AUSTRALIAN MODELS 1. Button 2. Button 6 1 3. Button 2 4. Button 7 3 5. Button 6. One Touch Speed Dial Buttons 4 7. Memory Storage Card 5 NOTE: If required the Memory Storage Card can be turned over to give 20 One Touch memory buttons, as shown below 11
ページ12に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 12 FUNCTIONS 17. status LED 8. Button 18. Button 9. Button 19. Button 10. Button 20. Not used 11. Button 21. tone Slide Switch 12. Handset Retainer Tab 22. speaker Volume Slide Switch 13. Button 23. Telephone Line Jack 14. Telephone Number Card 24. ringer Volume Switch (Hi/Med/Low) 15. Numeric Keypad 16. call LED 11 8 9 10 12 13 14 15 20 21 16 22 17 18 19 23 24 12 FUNCTIONS
ページ13に含まれる内容の要旨
INSTALLATION FP102-OM.qxd 7/12/98 09:27 Page 13 INSTALLATION HANDSET CORD CONNECTION Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the telephone. TELEPHONE LINE CORD CONNECTION Plug one end of the line cord (straight) into the telephone line jack on the back of the telephone and the other end into the wall outlet. NOTE: Most phone equipment available now use modular jacks. Phone cords are fitted with a molded plastic connector wh
ページ14に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 14 INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the Telephone. • Use the screws (supplied) with anchoring devices suitable for the wall material where
ページ15に含まれる内容の要旨
USING YOUR FP101 FP102-OM.qxd 7/12/98 09:27 Page 15 USING YOUR FP101 MEMORY DIAL NUMBERS 20 one touch speed dial numbers can be stored into the memory of your telephone. NOTE: There are 5 x Pre-Programmed memories and 15 x One Touch Memories. Each memory location can store a maximum of 32 digits. STORING ONE-TOUCH SPEED DIAL MEMORIES 1. To program One-Touch Memories ( ~ ). a. Pickup the Handset or press the button. b. Press the button. c. Enter telephone number that you want to program. d.
ページ16に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 16 USING YOUR FP102 PAUSE During the memory storage procedure you may enter a 4 second delay between numbers (for accessing a switchboard, or long distance service) by pressing the button on the Handset at the point in the number sequence you wish to pause. The button counts as one digit. Pressing more than once will increase the length of the pause between numbers. DIALING STORED NUMBERS For example, to dial memory 3 from the telephone 1. Pick up the Handset
ページ17に含まれる内容の要旨
USING YOUR FP102 FP102-OM.qxd 7/12/98 09:27 Page 17 USING YOUR FP102 ADJUSTING THE RINGER VOLUME CONTROL While the phone is ringing, you can adjust the ringer volume of your telephone by moving the ringer switch to the desired low/medium/high position. ADJUSTING THE RINGER TONE CONTROL While the phone is ringing, you can adjust the Ringer Tone of your telephone by moving the tone slide control to the desired position. ADJUSTING THE SPEAKERPHONE VOLUME CONTROL During a SpeakerPhone conversatio
ページ18に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 18 USING YOUR FP102 LED indicators 1. call LED indicator: Red light which flashes when the telephone is ringing. This is sometimes referred to as a ‘Visual Ringing Indicator’. 2. status LED indicator: a. Solid red light when ‘In Use’. b. Solid green light when in Speakerphone mode. c. Flashing green light when on ‘Hold’. PLACING A TELEPHONE CALL 1. Remove the Handset from the Base, or press the button. 2. Press the keypad buttons to dial the phone number you
ページ19に含まれる内容の要旨
USING YOUR FP102 FP102-OM.qxd 7/12/98 09:27 Page 19 USING YOUR FP102 ACCESSING THE CALL WAITING SERVICE USING THE CALL WAITING BUTTON (Australian Model only) 1. While talking, you hear the call waiting signal (series of beep tones). 2. Press the button then to switch call and put the current call on hold. 3. To switch back to original call, press the button then . NOTE: The + call waiting procedure toggles call between the incoming and the original call (vice versa). The + procedure will
ページ20に含まれる内容の要旨
FP102-OM.qxd 7/12/98 09:27 Page 20 USING YOUR FP102 To make a SpeakerPhone call, press the button, listen for the dial tone then use the keypad to dial the number you want to call. Lift the Handset to resume normal conversation. During a regular telephone conversation you can press the button and replace the Handset. The status LED turns green and you can begin your SpeakerPhone conversation. NOTE: The status LED turns green during SpeakerPhone use, and red during normal use. NOTE: It is no
