ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Welcome/Features 3 Using the Speed Dial Memory 20 Storing Names and Numbers in Speed Dial Memory 20 Controls and Functions 4 Storing Caller ID messages in Speed Dial Memory 23 Terms Used in this Manual 5 Making Calls from Speed Dial Memory 24 Accessibility 6 Caller ID and CIDCW (Caller ID on Call Waiting) 25 Installing the Phone 7 Viewing the Caller ID Message List 26 A. Choose the best location 7 Deleting Information from the Caller ID List 27 B. Install the rechargeable battery pack i
ページ3に含まれる内容の要旨
Congratulations on your purchase of the Uniden cordless phone. This cordless phone is Welcome designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless telephone may vary. • 5.8GHz Extended Range Technology • Last Number Redial Features • Integrated Answering Device • Tone/Pulse Dialing •
ページ4に含まれる内容の要旨
Controls and Functions 1. Handset antenna 2. Beltclip hole 1 3. Optional headset jack 4. Handset ringer speaker 5. Handset battery compartment 6. Handset earpiece 6 7. LCD display 2 8. (volume & scroll down) key 9. Call id (Caller ID)/menu key 10. (repeat/rewind) key 7 11. (delete) key 3 12. (stop) key 8 16 4 13. /tone/ (left cursor) key 9 17 14. Redial/pause key 15. Select/remote key 18 10 16. (volume & scroll up) key 19 20 17. End key 11 5 18. Talk/flash key 12 19. (skip/fast forward) key
ページ5に含まれる内容の要旨
26. Base antenna 43 44 27. Charge/in use LED 26 28. Memo/record key 29. (answer on/off) key 30. (repeat/rewind) key 31. Menu/clock key 32. Base charging contacts 33. Ringer key 27 34 34. Greeting key 28 35 35. (delete) key 36 29 36. (skip/fast forward) key 30 37 37. (play/stop) key 31 38 38. Find hs key 39 32 39. Set key 40 40. Volume/select (up) key 33 41 41. Volume/select (down) key 42 42. Mic (microphone) 43. Telephone line jack 44. DC IN 9V jack Terms Used in this Manual • Standby Mode - The
ページ6に含まれる内容の要旨
Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we will call you back. Information is also available on our web site, www.un
ページ7に含まれる内容の要旨
INSTALLING THE PHONE Installing the Phone Do the following steps: A. Choose the Best Location B. Install the Rechargeable Battery Pack into the Handset C. Connect the Base Unit and Charge the Handset D. Mount the Base Unit on a Wall If your home has specially wired alarm A. Choose the best location equipment connected to Before choosing a location for your new phone. Here are some important guidelines the telephone line, be you should consider: sure that installing the Avoid heat sources, such a
ページ8に含まれる内容の要旨
B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. Use only the Uniden 1) Press down on the handset battery case cover (use the (BT-905) rechargeable finger indention for a better grip) and slide the cover battery pack supplied downward to remove. with your phone. 2) Plug the battery pack connector (red & black wires) into the small jack inside the batte
ページ9に含まれる内容の要旨
INSTALLING THE PHONE C. Connect the Base Unit and Charge the Handset 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Place the handset in the base unit with the • Use only the supplied keypad facing forward. AD-314 AC adapter. Do not use any other 3) Make sure that the charge/in use LED AC adapter. illuminates. • Do not place the If the LED does not illuminate, check to see that power cord where it the AC adapter is plugged in and that the handset creat
ページ10に含まれる内容の要旨
D. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the AC adapter to the DC IN 9V jack. 1 Wall 2) Route the AC adapter cord through the molded 6 plate wiring channel as shown. 4 5 3) Plug the AC adapter into a standard 120V AC wall outlet. 6 AC 4) Plug the telephone line cord into the TEL outlet LINE jack. Route the cord through the molded 2 wiring channel as shown. AC adapter 3 5) Plug the telephone line cord into the t
ページ11に含まれる内容の要旨
INSTALLING THE PHONE Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. •
ページ12に含まれる内容の要旨
Headset Installation Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See back cover page.) [ 12 ] INSTALLING THE PHONE www.uniden.com
ページ13に含まれる内容の要旨
BASIC SETUP Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating AutoTalk AutoTalk allows you to answer the phone simply by removing the handset from the base. You do not have to press any keys. 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the select/remote key to turn AutoTalk on. 3) Press the end key to complete the s
ページ14に含まれる内容の要旨
Entering Your Area Code If you can make a call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. If you get a call from within your area code, you'll only see the 7-digit phone number. If you get a call from outside your area code, you'll see all 10 digits. 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the key twice to select Area Code. 3) Press the select/remote key. If an area code
ページ15に含まれる内容の要旨
BASIC SETUP 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the key three times to select Dial. 3) Press the select/remote key to set the phone to pulse dialing. If your phone system 4) Press the end key to complete the setting. The handset returns to standby mode. requires pulse dialing and you need to send Setting the language the DTMF tones for certain situations You can change the language the menu display uses. Choose from
ページ16に含まれる内容の要旨
Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the base. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the base. 2) Dial the number. 3) Press the talk/flash key. Receiving a call To turn on the AutoTalk feature, see "Activating 1) Remove the handset from the base. (If AutoTalk is on, the phone will Autotalk" on page 13. automatically answer the call when you pick it up.) 2) Press the talk/flash k
ページ17に含まれる内容の要旨
USING YOUR PHONE Redialing the Last Dialed Number 1) Remove the handset from the base. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Press the redial/pause key. OR 1) Remove the handset from the base. 2) Press the redial/pause key. 3) Press the talk/flash key. Adjust the Earpiece Volume To change the earpiece volume, press the or key during a call. You can only mute the Temporarily Mute Ringer handset ringer if the If the handset is off the base while an incoming call is ringi
ページ18に含まれる内容の要旨
Tone Dialing Switch-over If your telephone company requires pulse dialing, you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated such as telephone bank tellers, telephone prescription refills, customer support menus,etc. If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the /tone/ key. Any digits you enter from then on will be sent as tone digits. When this particular call
ページ19に含まれる内容の要旨
USING YOUR PHONE Find Handset To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds. To cancel paging, press any key on the handset or the find hs key on the base, or return the handset to the base. Paging is also canceled when the phone receives an incoming call. Using Call Waiting If you have Call Waiting, you can receive calls while on the line. 1) If a call comes in while you are on the phone, you will hear a call waiting tone. If you have CIDCW activated
ページ20に含まれる内容の要旨
Using the Speed Dial Memory The speed dial memory allows you to store up to 10 names and numbers in the handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number When editing the speed (up to 20 digits) that you need to enter once your call connects. This is referred to dial memory, you must as Chain Dialing. For example, you can save your bank account number to speed dial press a key within 30 memory. When y
