ページ1に含まれる内容の要旨
Operating Instructions
5.8 GHz Digital Cordless Phone
Model No. KX-TG6021NZ
with 2 Handsets
Model No. KX-TG6022NZ
Model shown is KX-TG6021NZ.
This unit is compatible with Caller ID. To use this feature, you must
subscribe to the appropriate service offered by your service provider/
telephone company.
Charge the handset battery for 7 hours before initial use.
Please read these Operating Instructions before using the unit and save for
future reference.
ページ2に含まれる内容の要旨
Table of Contents Introduction Index Product information . . . . . . . . . . . . . . 3 Index . . . . . . . . . . . . . . . . . . . . . . . . 39 Accessory information. . . . . . . . . . . . 4 Important safety instructions . . . . . . . 5 For best performance . . . . . . . . . . . . 7 Preparation Setting up the base unit. . . . . . . . . . . 9 Setting up the handset . . . . . . . . . . . 9 Controls. . . . . . . . . . . . . . . . . . . . . . 12 Display. . . . . . . . . . . . . . . . . . . . . . . 1
ページ3に含まれる内容の要旨
Introduction Product information Thank you for purchasing a Panasonic cordless telephone. These operating instructions can be used for the following models: KX-TG6021 KX-TG6022 Important: LThe suffix (NZ) in the following model numbers will be omitted in these instructions: KX-TG6021NZ/KX-TG6022NZ LReferences in these operating instructions to the charger and multiple handsets are for KX-TG6022 only. Special feature NHandset voice enhancer This feature clarifies the voice of the person you are
ページ4に含まれる内容の要旨
Introduction Accessory information Included accessories Quantity No. Accessory item KX-TG6021 KX-TG6022 1 AC adaptor for base unit 1 1 2 Telephone line cord 1 1 3 Wall mounting adaptor 1 1 4 Battery 1 2 *1 5 Handset cover 12 6 Charger – 1 7 AC adaptor for charger – 1 *1 The handset cover comes attached to the handset. 12 3 4 56 7 Additional/replacement accessories Accessory item Order number Rechargeable nickel metal hydride HHR-P107 (Ni-MH) battery 4
ページ5に含まれる内容の要旨
Introduction 11. To reduce the risk of electric shock, do not disassemble the product. Important safety Take the product to an authorised service centre when service is instructions required. Opening or removing When using the product, basic safety covers may expose you to precautions should always be followed dangerous voltages or other risks. to reduce the risk of fire, electric shock, Incorrect reassembly can cause or personal injury. electric shock when the product is 1. Read all
ページ6に含まれる内容の要旨
Introduction LNever touch uninsulated telephone WARNING: wires or terminals unless the LTo prevent the risk of fire or electrical telephone line has been shock, do not expose the product to disconnected at the network rain or any type of moisture. interface. LUnplug the product from power LUse caution when installing or outlets if it emits smoke, an abnormal modifying telephone lines. smell, or makes an unusual noise. LDo not touch the plug with wet hands. These conditions can cause fi
ページ7に含まれる内容の要旨
Introduction shielded from external RF (radio electromagnetic interference. Any frequency) energy. (The product modifications to any part of the operates in the frequency range of system or to any peripherals may void 5.76 GHz to 5.84 GHz, and the power the EMC compliance of the system or output is 200 mW (max.).) Do not use the peripherals. the product in health care facilities if LNot all telephones will respond to any regulations posted in the area incoming ringing when connected to i
ページ8に含まれる内容の要旨
Introduction – at a convenient, high, and central underground, near metal objects such location with no obstructions as wire fences, etc. between the handset and base unit LOperating the product near electrical in an indoor environment. appliances may cause interference. – away from electronic appliances Move away from the electrical such as TVs, radios, personal appliances. computers, wireless devices or other phones. Routine care – avoid facing radio frequency LWipe the outer surface
ページ9に含まれる内容の要旨
Preparation LThe unit is not designed to be used with rotary (pulse dialling) services. Setting up the base If you subscribe to an ADSL service unit Please attach a noise filter (contact your ADSL provider) to the telephone line Connecting the AC adaptor between the base unit and the and telephone line cord telephone line socket in the event of the Connect the telephone line cord until it following: clicks into the base unit and telephone – Noise is heard during conversations. line socket
ページ10に含まれる内容の要旨
Preparation Battery installation/ Battery charge Place the handset on the base unit or replacement charger for 7 hours before initial use. 1 Press the notch of the handset cover LWhile charging, “Charging” is firmly, and slide it in the direction of displayed and the charge indicator on the arrow. the handset lights in amber. When the LIf necessary, remove the old battery is fully charged, “Charge battery. completed” is displayed and the indicator lights in green. Base unit: 2 Insert th
ページ11に含まれる内容の要旨
Preparation the handset, base unit, and charger charger, even when the handset is not with a soft, dry cloth once a month. in use. Clean more often if the unit is subject LAfter the handset is fully charged, to the exposure of grease, dust, or displaying “Charge completed”, it high humidity. may be left on the base unit or LWhen the battery is empty, “Charge charger without any ill effect on the for 7h” is displayed and the charge battery. indicator does not light for about 5 LThe batter
ページ12に含まれる内容の要旨
Preparation Handset Controls J Base unit K L A M B N C B D A O E P B F C A IN USE indicator G B {LOCATOR} H C Charge contacts I KX-TG6021 KX-TG6022 Q R A Speaker B Soft keys C Headset socket D {C} (TALK) E Navigator key ({^}{V}{<}{>}) F {s} (SP-PHONE) G {RECALL}{CALL WAIT} H Microphone I Charge contacts J Lanyard/strap eyelet K Charge indicator Ringer indicator Message indicator 12
ページ13に含まれる内容の要旨
Preparation L Receiver M Display Display N {MENU} O {OFF} Handset display items P {PAUSE}{REDIAL} Q {HOLD} Displayed Meaning R {HOLD}{INTERCOM} item J Voice enhancer is on. Using the navigator key 5 Battery level The handset navigator key can be used to navigate through menus and to select Example: The handset’s items shown on the display by pressing [1] extension number {^},{V},{<}, or {>}. (example shown here: *1 handset 1) Adjusting audio volume Press {^} or {V} repeatedly while *1 KX-
ページ14に含まれる内容の要旨
Preparation Setting the unit before use Important: LTo program features by scrolling through the display menus, see page 23. Date and time Set the correct date and time. – To display the date and time when the calls were received in the caller list. – To use the available alarm function (page 27). 1 {MENU}i{4}{1} 2 Enter the current day, month, and year by selecting 2 digits for each. Example: 15 August, 2007 {1}{5}{0}{8}{0}{7} 3 Enter the current hour and minute (12-hour clock format) by
ページ15に含まれる内容の要旨
Making/Answering Calls Erasing a number in the redial list Making calls 1 {REDIAL} 2 {V}/{^}: Select the desired phone 1 Dial the phone number. number. LTo correct a digit, press {Clear}. 3 {Erase}i{Yes}i{OFF} 2 Press {C} or {Call}. 3 When you finish talking, press {OFF} PAUSE button (for PBX/long or place the handset on the base unit distance service users) or charger. A pause is sometimes required when Note: making calls using a PBX or long L“Line in use” is displayed when distance servi
ページ16に含まれる内容の要旨
Making/Answering Calls Answering calls Useful features during a call When a call is being received, the ringer indicator flashes rapidly. HOLD button 1 Press {C} or {s}. This feature allows you to put an LYou can also answer the call by outside call on hold. pressing any dial key from {0} to KX-TG6021 {9},{*}, or {#}. (Any key talk Press {HOLD} during an outside call. feature) 2 When you finish talking, press KX-TG6022 {OFF}. Press {HOLD} 2 times during an outside call. Note: LYou can ch
ページ17に含まれる内容の要旨
Making/Answering Calls LWhen this feature is turned off RECALL button manually during a call, it does not turn Pressing{RECALL} allows you to use on automatically during the same call. special features of your host PBX such LWhile this feature is turned on the as transferring an extension call, or battery operating time is shortened accessing optional telephone services (page 11). such as Call Waiting. Note: Handset voice enhancer LTo change the recall time, see page This feature can si
ページ18に含まれる内容の要旨
Phonebook Key Character Handset phonebook {9} w xyzWX Y Z 9 {0} 0Space You can add up to 50 items to the handset phonebook and search for {*} ; phonebook items by name. {#} # LTo enter another character that is Adding items to the located on the same dial key, first phonebook press {>} to move the cursor to the 1 {Phonebook} next space. 2 {Add} Editing/correcting a mistake 3 Enter the name (max. 16 Press {<} or {>} to move the cursor to characters). i{Next} the character or number you wa
ページ19に含まれる内容の要旨
Phonebook L If there is no item corresponding to phonebook as one phonebook item, the letter you selected, the next press {PAUSE} to add pauses after item is displayed. the number and PIN as necessary (page 15). 3 Press {V} to select the desired item. 4 Press {C} to dial the phone number. Copying handset Editing items in the phonebook items phonebook Available model: 1 Find the desired item (page 18). i KX-TG6022 {Option} 2 {V}/{^}: “Edit”i{Select} You can copy one or all of the phonebook
ページ20に含まれる内容の要旨
Caller ID Service Caller information for the last 50 callers is logged in the caller list by the most Using Caller ID service recent call to the oldest. LIf the unit cannot receive caller Important: information, the following is LThis unit is Caller ID compatible. To displayed: use Caller ID features, you must –“Out of area”: The caller dialled subscribe to your service provider/ from an area which does not telephone company’s Caller ID provide Caller ID service. service. –“Private call
