ページ1に含まれる内容の要旨
Operating Instructions
Digital Cordless Phone
Model No. KX-TCD440AL
Digital Cordless Answering System
Model No. KX-TCD445AL
This unit is Caller ID compatible. To display the caller’s phone
number, you must subscribe to Caller ID service.
Charge the batteries for about 7 hours before initial use.
Please read these Operating Instructions before using the unit and save them for
future reference.
ページ2に含まれる内容の要旨
Table of Contents Preparation Useful Information Accessory information . . . . . . . . . . . . . . .3 Troubleshooting . . . . . . . . . . . . . . . . . . . 36 Important information . . . . . . . . . . . . . . . .4 Technical information. . . . . . . . . . . . . . . 38 Location of controls . . . . . . . . . . . . . . . . .7 Connections . . . . . . . . . . . . . . . . . . . . . . .8 Index Battery installation . . . . . . . . . . . . . . . . . .8 Index . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
Preparation Preparation Accessory information Thank you for purchasing a new Panasonic digital cordless phone. Dear Purchaser, You have acquired a product made in compliance with the digital enhanced cordless telecommunications (DECT) standard. DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. Included accessories AC adaptor Telephone lin
ページ4に含まれる内容の要旨
Preparation Warning: L To prevent the risk of fire or electrical Important information shock, do not expose this product to rain or any other type of moisture. General L The cordless handsets are magnetised L Use only the power supply included with and may retain small metallic objects. this product, noted on page 3. L Do not connect the AC adaptor to any AC Location outlet other than a standard 220–240 V For maximum distance and noise-free AC outlet. operation, place your b
ページ5に含まれる内容の要旨
Preparation Instructions to customer Installation Attached to this telephone is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular te
ページ6に含まれる内容の要旨
Preparation If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed. Should the Permitted Attachment not operate when plugged into a socket, it
ページ7に含まれる内容の要旨
Preparation I Receiver J Display Location of controls K {R} (Redial/Pause) L {j} (Menu/OK) Handset M {ih} (Off/Power) N {C/T} (Clear/Mute) I O {INT} (Intercom) P Microphone A J Display descriptions K L Icons Meaning B M w Within range of base unit C N Out of range, no registration D 0w4 or no power on base unit E Paging, intercom mode or x accessing base unit F O k Making or answering a call G C Phonebook mode G l Setting mode P H 7 Battery strength is low A Speaker 5 Battery st
ページ8に含まれる内容の要旨
LINE LINE Preparation Base unit Battery installation A 1 Insert the batteries negative (−) terminal first. B A Charge contacts B {x} (Page) Connections 2 Close the battery cover. Hooks (220–240 V, Note: 50 Hz) L Use only rechargeable batteries (page 3). Note: L If the handset is not charged, you cannot make or answer calls. L Never install telephone wiring during a lightning storm. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel wa
ページ9に含まれる内容の要旨
Preparation Battery life Battery charge After your Panasonic batteries are fully charged, you can expect the following Place the handset on the base unit for performance: about 7 hours before initial use. Ni-MH batteries (typical 700 mAh) Operation Operating time While in use (talking) 10 hours max. While not in use 200 hours max. (standby) Ni-Cd batteries (typical 250 mAh) Operation Operating time While in use (talking) 4 hours max. Note: While not in use 60 hours max. L Clean
ページ10に含まれる内容の要旨
Preparation Battery replacement Turning the power on/off If 074 flashes even when the handset Power on batteries have been fully charged, both Press {ih} for about 1 second. batteries must be replaced. L The display will change to the standby Important: mode. L Please use only the Panasonic batteries, noted on page 3. Power off L Use only rechargeable batteries. If you install non-rechargeable batteries and Press {ih} for about 2 seconds. start charging, the batteries may le
ページ11に含まれる内容の要旨
Preparation Setting the time and date Wall mounting 8 cm Important: L Confirm that the AC adaptor is connected. L Ensure that w is not flashing. 1 Press {j}. Screws Hooks Hook 2 Press {v} repeatedly to display “SETTING BS”, then press {>}. 3 Press {*}. 4 Enter the current hour and minute by selecting 2 digits for each (24-hour time entry). Note: Example: 15:15 L Make sure the screws are securely Press {1}{5} {1}{5}. fastened to the wall. L If you make a mistake, press {C/T}.
ページ12に含まれる内容の要旨
Telephone Telephone flash and mute is automatically turned on. Note: Making calls L Automatic redial is cancelled when the 1 Lift the handset and dial the phone navigator or any button is pressed. number. L If mute does not turn off after the line is L To correct a digit, press {C/T}, then connected, press {C/T}. enter the correct number. To make a call using the redial list 2 Press {C}. The last 10 phone numbers dialled are 3 When finished talking, press {ih} or stored in th
ページ13に含まれる内容の要旨
Telephone 4 Press {v} repeatedly to display “YES”, Note: then press {>}. L Emergency calls cannot be made until key L To erase other numbers, repeat from lock is turned off. step 2. L Key lock is turned off when the handset is turned off. 5 Press {ih}. R button (to use the recall feature) To store a number from the redial list into the phonebook {R} is used to access optional telephone services. Contact your service provider for 1 Press {R}. details. 2 Press {v} repeatedly to
ページ14に含まれる内容の要旨
Telephone an outside call. Important: Answering calls L Before recording a conversation, you should inform the other party that the 1 Lift the handset and press {C} or {s} conversation will be recorded. when the unit rings. L You can also answer a call by pressing 1 Press {j} during a conversation. any dial key from {0} to {9}, {*}, {#}, 2 Press {#}. or {INT}. (Any key talk feature) L “RECORDING” is displayed and 2 When finished talking, press {ih} or recording starts. place
ページ15に含まれる内容の要旨
Telephone L If there is no space to store new entries, “MEMORY FULL” will be displayed. Erase Phonebook unnecessary entries. Storing phone numbers and To edit/correct a mistake names 1 Press {<} or {>} to move the cursor to the right of where you want to correct the Up to 20 phone numbers can be stored in number/character. the phonebook for quick access. 2 Press {C/T} to erase a digit, then enter 1 Press {j} 2 times. the correct number/character. 2 Enter a phone number (24 d
ページ16に含まれる内容の要旨
Telephone 2 Press {>}. Making calls using the 3 Press {v} repeatedly to display “YES”, phonebook then press {>}. Before using this feature, store the desired 4 Press {ih}. phone numbers and names into the Note: phonebook (page 15). L The number erased from a hot key will not 1 Press {k}. be erased from the phonebook. To erase from the phonebook, see page 15. 2 Press {e} or {v} repeatedly to display the desired entry. Making calls using a hot key 3 Press {C} or {s}. 1 Press a
ページ17に含まれる内容の要旨
Telephone information while talking. After you hear a call-waiting tone, the caller’s phone number Caller ID service will be displayed. You can answer the second call, keeping Important: the first call on hold. Follow Telstra or your L This unit is Caller ID compatible. To service provider instructions using {R}. display the caller’s phone number, you L If the phone number is stored in the must subscribe to Caller ID service. After phonebook with its name, the caller’s su
ページ18に含まれる内容の要旨
Telephone Example: 4 Press {ih}. *1 Storing caller information into the phonebook 1 Press {e} or {v} repeatedly to display the desired entry, then press {>}. 2 Press {v} repeatedly to display “SAVE *1 Shown when this call has already been TEL NO”, then press {>}. viewed or answered. 3 Press {j}. 3 Press {C} or {s} to call back the 4 Enter the party’s name (9 characters displayed party. max.; see the character table on page Note: 15). L When no calls have been received, the
ページ19に含まれる内容の要旨
Useful Telephone Settings Useful Telephone Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. Details of each item can be found on the corresponding pages. To enter the 2nd menu, first press {>}. Press {v} repeatedly to display “SETTING HS”, then press {>}. 2nd menu 3rd menu Default setting Page “TIME ALARM”“SET TIME” page 20 “SET ALARM”“OFF” page 20 “RINGER OPT”“RINGER VOL” Level 6 page 20 “EXT
ページ20に含まれる内容の要旨
Useful Telephone Settings ALARM”, then press {>}. Handset settings 4 Press {v} repeatedly to display “SET ALARM”, then press {>}. 5 Press {v} repeatedly to select the Time alarm desired setting, then press {>}. An alarm will sound for 3 minutes at the set 6 Press {ih}. time once or daily. “ONCE”: The alarm will ring only once. Ringer options “REPEAT DAILY”: The alarm will ring at the set time everyday. Ringer volume “OFF”: Turns this feature off. Set the time and date beforeha
