ページ1に含まれる内容の要旨
Preparation Cordless Telephone Useful Information
9
3
1 2
4 5 6
7 8
0
R INT
C
TCD400AL_e.book Page 1 Wednesday, August 20, 2003 6:29 PM
Digital Cordless Phone
Operating Instructions
Model No. KX-TCD400AL
Contents
Preparation
Before Initial Use ......................... 2
Important Information .................. 3
Setting up .................................... 6
Cordless Telephone
Using the Telephone ................. 11
Making Calls.............................. 12
Answering Calls...........
ページ2に含まれる内容の要旨
TCD400AL_e.book Page 2 Wednesday, August 20, 2003 6:29 PM Before Initial Use Thank you for purchasing your new Panasonic digital cordless telephone. Dear purchaser, You have acquired a KX-TCD400AL, which is a product made in regard with the Digital Enhanced Cordless Telecommunications (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. Accessories (included) AC Adaptor Telephone Line Cord Rechargeable Bat
ページ3に含まれる内容の要旨
Preparation TCD400AL_e.book Page 3 Wednesday, August 20, 2003 6:29 PM Important Information Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attac
ページ4に含まれる内容の要旨
TCD400AL_e.book Page 4 Wednesday, August 20, 2003 6:29 PM Important Information If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed. Should the Permitt
ページ5に含まれる内容の要旨
Preparation 400AL_e_02.fm Page 5 Tuesday, September 9, 2003 4:15 PM Important Information Only use the power supply included with WARNING: the product. TO PREVENT THE RISK OF FIRE OR Do not connect the AC Adaptor to any AC ELECTRICAL SHOCK, DO NOT outlet other than the standard AC230 V. EXPOSE THIS PRODUCT TO RAIN The apparatus is approved for use with OR ANY TYPE OF MOISTURE. PQLV200AL power supply. THE CORDLESS HANDSET IS This apparatus is unable to make MAGNETISED AND MAY RETAIN e
ページ6に含まれる内容の要旨
LINE TCD400AL_e.book Page 6 Wednesday, August 20, 2003 6:29 PM Setting up Connection Plug in the AC adaptor and the telephone line cord in order 1, 2, 3, 4. Hooks 1 2 4 Fasten the AC adaptor cord to prevent it from being disconnected. 3 The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • Never install telephone wiring during a lightning storm. • KX-TCD400AL is not designed to be used with rotary (pulse dialling) services. Battery Ins
ページ7に含まれる内容の要旨
Preparation TCD400AL_e.book Page 7 Wednesday, August 20, 2003 6:29 PM Setting up Battery Charge Battery Life At the time of shipment, the batteries are Battery life is dependent on use and not charged. To charge, place the conditions but in general when using fully handset on the base unit. Please charge charged Ni-MH batteries (700 mAh): the batteries for about 7 hours before Talk time: 10hrs approx. initial use. During charging, the battery Standby time: 120hrs approx. icon is as shown be
ページ8に含まれる内容の要旨
TCD400AL_e.book Page 8 Wednesday, August 20, 2003 6:29 PM Setting up Symbols Used in This Operating Instructions Symbol Meaning To search the desired item, press UP or DOWN. To select the desired item, press RIGHT. To search and then to select the desired item, press UP or DOWN then RIGHT. To move the cursor to the right or to the left, press RIGHT or LEFT. To go to the next step. " " The words in " " indicate the words in display. Replacing the Batteries If the icon flashes after a few tel
ページ9に含まれる内容の要旨
Preparation 9 3 1 2 4 5 6 7 8 0 R INT C TCD400AL_e.book Page 9 Wednesday, August 20, 2003 6:29 PM Setting up Location of Controls Handset 1 - : PHONEBOOK Button Receiver 2 - TALK Button 3 - Navigator Key Display 1 4 - REDIAL/PAUSE Button 6 2 7 R 5 - RECALL Button 3 4 8 6 - : MENU/OK Button 7 - OFF/POWER Button 5 Charge 9 C C 8 - CLEAR Button Contact Charge Microphone INT Contact 9 - HOLD Button Handset Display Within range of a base unit Call BAR ON (p. 22) Out of range/No power on base unit
ページ10に含まれる内容の要旨
TCD400AL_e.book Page 10 Wednesday, August 20, 2003 6:29 PM Setting up Wall Mounting This unit can be mounted on a wall. - Insert screws into the wall. The centre of the screw hole should be 8 cm horizontally apart. - Connect the AC adaptor and the telephone line cord. - Arrange the wires as shown, then mount the unit. 8 cm Screws Hooks Wall Template 8 cm 10
ページ11に含まれる内容の要旨
Cordless Telephone 400AL_e_03.fm Page 11 Monday, August 25, 2003 8:12 PM Using the Telephone Power On/Off Power on Power off Press for more than 1 second.*1 Press for more than 2 seconds.*2 *1 When button is released, the display changes to the standby mode. *2 The display goes blank. Making a Call Pre-dialling Post-dialling Phone Number*1 Phone Number 11 2 2 Press TALK. Press TALK. *1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers. Answering a Call Ter
ページ12に含まれる内容の要旨
TCD400AL_e.book Page 12 Wednesday, August 20, 2003 6:29 PM Making Calls Redialling The last 10 numbers dialled are stored in the redial list automatically. Dialling with the Redial List Dialling the Last Number Dialled 11 23 2 Press Search the desired Press Press TALK. Press REDIAL. REDIAL.*1 dialled item. TALK. Editing the Dialled Number in the Redial List The 1st digit of 1 23 the desired dialled Press REDIAL.*1 Search/Select the Search/Select number blinks. desired dialled item. "EDIT CAL
ページ13に含まれる内容の要旨
Cordless Telephone TCD400AL_e.book Page 13 Wednesday, August 20, 2003 6:29 PM Answering Calls Auto Talk If you set Auto Talk to on, you can answer the phone by lifting the handset off the base unit. 12 3 4 5 Press Search/Select Search/Select Search/Select Search/Select MENU. "SETTING HS". "OTHER OPT". "AUTO TALK". "ON" or "OFF". • To exit the operation, press any time. Temporary Bell Off When an external call is incoming, you can temporarily turn off the handset ringer. This function will
ページ14に含まれる内容の要旨
TCD400AL_e.book Page 14 Wednesday, August 20, 2003 6:29 PM Phonebook You can store up to 20 caller information in the phonebook. Storing a Caller Information Phone Number 1 23 4 Press MENU. Select Enter phone number. Press OK. "NEW PHONE". (max. 24 digits) *1 Name 56 Enter name. Press OK.*2 (max. 9 characters)*1 • To exit the operation, press any time. *1 If you need to make a correction, press RIGHT or LEFT to move cursor then clear digit/character by pressing CLEAR, and/or enter digits/ch
ページ15に含まれる内容の要旨
Cordless Telephone TCD400AL_e.book Page 15 Wednesday, August 20, 2003 6:29 PM Phonebook Editing a Caller Information The 1st digit of the 1 23 desired phone Press Search/Select Select "EDIT". number blinks. PHONEBOOK.*1 desired item. AND/ C Number 6 4 5 OR Edit the phone Move cursor. Press CLEAR.*2 Press OK. number.*3 AND/ C Name 78 9 OR Move cursor. Edit the name.*4 Press CLEAR.*2 Press OK. Clearing a Caller Information 12 3 4 Search/Select Search/Select Search/Se
ページ16に含まれる内容の要旨
TCD400AL_e.book Page 16 Wednesday, August 20, 2003 6:29 PM Phonebook Storing the Phone Number into the Phonebook When Pre-dialling Phone Number*1 Name 1 23 4 Enter name.*2 Press OK to Press OK twice. store the number. 5 Press OK. • To exit the operation, press any time. *1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers. *2 To enter characters, see Character Selection on page 14. Storing the Number from the Redial List into the Phonebook 1 23 4 Press O
ページ17に含まれる内容の要旨
Cordless Telephone TCD400AL_e.book Page 17 Wednesday, August 20, 2003 6:29 PM Phonebook Hot Key You can assign the dialling buttons 1 through 9 as hot keys. You can choose 9 phone numbers from the phonebook. Registering a Phone Number as a Hot Key 1 23 4 Press Search/Select Search/Select Search/Select PHONEBOOK.*1 desired item. "HOT KEY REG". desired dialling button number.*2 5 Search/Select "YES". Dialling with Hot Key Press and hold the dialling button registered as a hot key. 12 Press T
ページ18に含まれる内容の要旨
TCD400AL_e.book Page 18 Wednesday, August 20, 2003 6:29 PM Handset Settings : Time Alarm Before programming, please follow steps 1 to 3. You must set the clock before setting the time alarm. 12 3 Press MENU. Search/Select Search/Select "SETTING HS". "TIME ALARM". Setting Alarm Time Time 45 6 7 Search/Select Enter time. Search/Select Press OK. "SET TIME". 4-digit "OFF", (24 hour clock) "ONCE" or "REPEAT DAILY". Setting Time Alarm On/Off 45 Search/Select Search/Select "SET ALARM". "OFF", "ON
ページ19に含まれる内容の要旨
Cordless Telephone 400AL_e_03.fm Page 19 Monday, August 25, 2003 8:12 PM Handset Settings : Ringer Option Before programming, please follow steps 1 to 3. 12 3 Press MENU. Search/Select Search/Select "SETTING HS". "RINGER OPT". Setting the Ringer Volume The choices are 6 levels and off. 45 Search/Select Search/Select "RINGER VOL". desired ringer volume. • If "RINGER OFF" is selected, is displayed. Setting the Ringer Pattern for External Call/Alarm There are 20 patterns available on each rin
ページ20に含まれる内容の要旨
TCD400AL_e.book Page 20 Wednesday, August 20, 2003 6:29 PM Handset Settings : Tone Option You can set the following sounds on or off. Key Tone: Key tone will sound when you press any key, and a confirmation tone and an error tone will be heard during operation. Range Warning Alarm: Alarm will sound when you move out of range of a base unit. Battery Low Alarm: Alarm will sound when the batteries need to be charged. 1 23 4 Press MENU. Search/Select Search/Select Search/Select "SETTING HS". "T
