ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
STATION BUSY/NO ANSWER OPTIONS ....... 7 GENERAL INFORMATION .................... 1 Automatic Callback .......................... 7 DIGITAL TELEPHONE HEADSETS .............. 1 Callback Request ............................ 7 Step Call .................................... 7 ANSWERING CALLS .......................... 3 Tone/Voice Switching ........................ 7 Internal Ringing Calls ........................ 3 Tone Override ............................... 7 Voice Announced Interna
ページ3に含まれる内容の要旨
INTERNAL CALLS INTERNAL RINGING CALLS 0 Lift handset OR press SPKR key Lage LED flashing red 0' Lift handset O Dial extension number 0 Converse OR Press Feature Access key or One Touch key VOICE ANNOUNCED INTERNAL CALLS programmed for Direct Station Selection (DSS) 0 Ensure MIC LED is lit NOTE : When calling a station that is not busy, 0 Respond handsfree or lift handset dialling 1 after the station number will change OUTSIDE RINGING CALtS ringing tone to voice or voice to ringing
ページ4に含まれる内容の要旨
LAST NUMBER REDIAL PAGING . To redial the last outside number called 0 Lift handset 0 Press LNR/SPD key O Dial Paging code: O Dial # All lnternal Zones 70 O Lift handset Internal Zone A 71 Internal Zone B 72 AUTOMATIC RED IAL Internal Zone C 73 After originating a busy or unanswered outside call All External Zones 75 on the handset External Zone A 76 O Press SPKR key External Zone B 77 0 Replace handset External Zone C 78 O Press FNC key O Page O Press LNW
ページ5に含まれる内容の要旨
HOLDING CALLS TRANSFERRING CALLS NON-EXCLUSIVE HOLD With a call In progress With a call in progress O Press the HOLD key O Press HOLD key O Enter the desired station number O Replace handset OR Press Feature Access key or One Touch key EXCLUSIVE HOLD programmed for Direct Station Selection With a call in progress O Announce the transfer when the party answers, O Press FNC key press RECALL key and replace handset O Press HOLD key. Only your station can OR retrieve this call Press
ページ6に含まれる内容の要旨
ANSWER A CAMPED- ON CALL REPEAT Receive camp-on tone through handset while To redial the outside number stored on a call O press LN R/ SPD key 0 Hang up on present call. Telephone will 0 Dial * then ring Lift handset O Lift handset and convene with second party HANDSFREE MICROPHONE ON/OFF OR Press key O Press HOLD key to place present call on Hold 0 Dial 1 U Press the (camped-on) green flashing Line key NOTE : Lit MlC LED indicates MIC on. associated with the second party and co
ページ7に含まれる内容の要旨
TONE/VOlCE SWITCHING AUTOMATIC CALLBACK When calling a station that is not busy SET il Dial 1 to switch from tone ringing to voice or When calling a busy internal telephone voice to tone ringing. 0 Dial 0 0 Replace handset TONE OVERRIDE ANSWER SET While calling a busy digital telephone When both telephones are idle, originating ;;I Dial * telephone rings 0 Lift handset Q Wait for signalled party to answer Call is placed automatically ANSWER CA LL BACK REQUEST With a call in pr
ページ8に含まれる内容の要旨
DO NOT DlSTURB (DND) CALL FORWARD ALL CALLS (CWA) With handset in cradle SET SET 0 Lift handset 0 Press FNC key O Dial 6* 0 Dial 60 O Dial destination station number 0 Press FNC key 0 Replace handset CANCEL CANCEL 0 Press FNC key O Lift handset O Dial 69 O Dial 6# O Press FNC key 0 Replace handset NOTE : The FNC LED will flash intemittently CALL FORWARD NO ANSWER (CF/NA) when your telephone is set for Do Not Disturb SET or a Call Forward. 0 Lift handset NOTE 2: A customiz
ページ9に含まれる内容の要旨
STATION/SYSTEM SPEED DW FEATURE ACCESS KEYS Each station can have 10 speed dial memories Only available for keys not designated as Line keys and can access the system's 90 Speed dial or Call Park keys. With the handset in the cradle memories. With the handset in the cradle SET SET 2 Press FNC key Press FNC key 3 Press LNR/SPD key 0 Press LNR/SPD key 2 Dial Speed Dial Memory location 90-99 O Dial Speed Dial Memory location: 3 Press Feature Access key to be programmed 90-99 for you
ページ10に含まれる内容の要旨
ONE TOUCH KEYS Only available for digital telephones with One From designated digital telephones only. Touch keys. With the handset in cradle With the handset in cradle SET O Press FNC key O Press FNC key O Dial 9#. FNC LED flashes, changing the mode O Press LNR/SPD key to time adjustment mode. O Press One Touch key to be programmed 0 Adjust the hours and minutes with the dial pad. O Program one of the following: Dial# to move the display cursor to the right. mOUTSIDE CALL - Dial 0
ページ11に含まれる内容の要旨
