ページ1に含まれる内容の要旨
Sirius™ Connect USB interface board
Installation Instructions
This is for the SIR-ALP1
Disclaimers:
• Modifying the radio may void any outstanding warranty it may have.
• This product is not affiliated with Sirius Satellite Radio in any way.
• There are no warranties expressed or implied by purchase of this product.
• All boards are tested and verified 100% before shipping.
• While every care has been taken to provide a quality product, I cannot guarantee the board to
function corr
ページ2に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Separate the two sections (neat engineering huh?) Page 2 of 13 Created On Tuesday, March 14, 2006
ページ3に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Remove the top, and remove the pc board inside There are 4 screws that need to removed be removed. Install the new board. Secure with same screws. (Look, I even put some in.) Page 3 of 13 Created On Tuesday, March 14, 2006
ページ4に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Begin assembling the radio… Page 4 of 13 Created On Tuesday, March 14, 2006
ページ5に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions USB Digital Audio & Analog Audio Out 12 Volts DC The left connector has analog audio on standard 1/8” (3.5mm) jack. A cable is provided. Also available on this same jack is optical digital audio; an adaptor is provided to allow use of standard Toslink cables. The center connector is the power supply for the tuner. Center pin is positive. The right connector is USB. When the suspend signal is sent from the
ページ6に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Driver installation: Connect USB cable to PC. Select: Install from a list of specific location Click: Next Page 6 of 13 Created On Tuesday, March 14, 2006
ページ7に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions If your drivers are on your HD Set the location of the search. If your installing the Drivers from the CDROM supplied, check that box Click: Continue Anyway (I can’t afford Microsoft WHQL !) They are WHQL before I make the simple string name changes! Page 7 of 13 Created On Tuesday, March 14, 2006
ページ8に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Click: Finish (another device will automatically detect) Click: Next Page 8 of 13 Created On Tuesday, March 14, 2006
ページ9に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Same as above, click: Continue Anyway Click: Finish DONE! Page 9 of 13 Created On Tuesday, March 14, 2006
ページ10に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions My Sirius Communication soft will only supports Com1 – com9 (Yeah, I know…) So if I need to move com ports around (Who has more then 9 things?!) Use Device Manager. Windows Key - Break Right Click: MJS Sirius Interface -> Properties Page 10 of 13 Created On Tuesday, March 14, 2006
ページ11に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Select Port Settings tab. Click: Advanced Page 11 of 13 Created On Tuesday, March 14, 2006
ページ12に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Change to a new comport COM1 – COM9 Click OK and a bunch more OKs Page 12 of 13 Created On Tuesday, March 14, 2006
ページ13に含まれる内容の要旨
Sirius™ Connect USB interface board Installation Instructions Enjoy! Remember the tuner needs 12 Volts DC too! Use supplied plug, or Wall Wart! For support and software please visit www.rush2112.net Thanks for you purchase of this interface board -Mitch Thanks Alex for the wonderful application, Sirius Recorder. P.S. What exactly is a double sided mirror? And last time I checked, Home Depot sells elbow grease in isle 9. Page 13 of 13 Created On Tuesday, Marc
