ページ1に含まれる内容の要旨
Issue 1 Jan 2006
LKA-200
_________________________________________________________________________________________________
PRODUCT SPECIFICATION
LKA-200 SINGLE LINE TELEPHONE
DISTRIBUTION:
Sales & Marketing 1 copy
Engineering team 1 copy
QA team 1 copy
Manufacturing team 1 copy
Documentation 1 copy
Customer Service 1 copy
________________________________________________________________
ページ2に含まれる内容の要旨
Issue 1 Jan 2006 LKA-200 _________________________________________________________________________________________________ 1.0 REVISION HISTORY DATE REVISION DESCRIPTION January 15, Preliminary Issue Standard version 2006 1 2.0 GENERAL DESCRIPTION The LKA-200 is a single-line telephone which primarily intended to be used in PBX, Key System, Hybrid, and Central Office applications. Most of the telephone features provide a solution that meets the necessary requirement
ページ3に含まれる内容の要旨
Issue 1 Jan 2006 LKA-200 _________________________________________________________________________________________________ Ringer melody and volume control - The Ringer Melody and volume can be adjusted by user. There are three different melodies with high, medium, low and off sound level. See section 5.0 for programming procedure. 4.0 HARDWARE REQUIREMENTS Each telephone model is comprised of the following major components: - Baseset - Handset - Handset cord - Line cord
ページ4に含まれる内容の要旨
Issue 1 Jan 2006 LKA-200 _________________________________________________________________________________________________ 6.0 ELECTRICAL CHARACTERISTICS 6.1 TRANSMISSION CHARACTERISTICS 6.1.1 Loudness Rating Transmit, receive and sidetone objective loudness ratings shall be determined in accordance with the requirements of TBR21 standard. Data measure in term of separate numerical ratings for transmit (TOLR), receive (ROLR), and sidetone (SOLR) for each of the following li
ページ5に含まれる内容の要旨
Issue 1 Jan 2006 LKA-200 _________________________________________________________________________________________________ 6.2.3 Frequency Deviation The accuracy for each of the two fundamental frequencies compare to DTMF frequency table. Required result: Less than + 1.5 % 6.2.4 DTMF Signal Duration Required results: Signal duration time : More than 65 ms Inter-digit time : More than 65 ms 6.2.5 DTMF Total Harmonic Distortion Required result: Less tha
ページ6に含まれる内容の要旨
Issue 1 Jan 2006 LKA-200 _________________________________________________________________________________________________ 6.4 DC CHARACTERISTICS 6.4.1 on-hook AC impedance Required result: f < 200 Hz : More than 25 kohm 697 < f < 1,633 Hz : More than 80 kohm f > 3,200 Hz : More than 60 kohm 6.4.2 off-hook AC impedance Required result: 400 ~ 1,400 ohm 6.4.3 Return Loss Required result: More than 10 dB through frequency range 200 ~ 3,200 Hz 6.5 CA
