ページ1に含まれる内容の要旨
PRINTER’S INSTRUCTIONS:
INSTR,ACCESS LOCAL PROGRAMMING - LINEAR P/N: 228505 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - FOLDING: ALBUM-FOLD - BINDING: SADDLE-STITCH
AE1000Plus
AE2000Plus
AM3Plus
Local Programming
Addendum
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.linearcorp.com
ページ2に含まれる内容の要旨
Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Local Programming Note for Network Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Keypad Data Entry Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
1 Introduction Linear has added a local programming option for the AE1000Plus, AE2000Plus, and AM3Plus access control panels. Local programming is suitable for the system installers during the early stages of new building construction projects where a computer is not accessible for programming or when telephone lines are not yet available for connecting to the panels. Local programming allows for the setting of commonly programmed options directly from the panel keypad for the AE1000Plus an
ページ4に含まれる内容の要旨
4 Visual Feedback On the AE2000Plus and AE1000Plus systems, a text prompt will be shown on the system display for guidance. On the AM3Plus system, the LED on the PBUS keypad will be used to provide visual feedback. A long “amber” LED will signify an error, two short fl ashing green LED will signify the successful entry of a programming fi eld, and three short fl ashing green LED will signify the successful entry of a complete programming step. 5 Audible Feedback When entering data, one long bee
ページ5に含まれる内容の要旨
8 Local Programming Functions Function 01: Change Master Password CHANGE MASTER PASSWORD FCN 01 The master password is used to protect the database that was entered via local programming. The master password can be changed using 01#PW#PW# this function. Default password “123456” still should be used (instead of the changed PW = NEW 6-DIGIT PASSWORD Master Password) when AB2000 or AXNET connection is used to connect to the controller. FACTORY SETTING: 123456 Function 02: Directory Code Lengt
ページ6に含まれる内容の要旨
8 Local Programming Functions (Continued) Function 20: PBX Dialing Digit PBX DIALING DIGIT FCN 20 (AE1000Plus and AE2000Plus Only) A PBX Dialing Digit can be programmed using this function (the default 20#VALUE# is none). This digit plus a four second delay will be added before the telephone number being dialed. Entering 10 removes the PBX Dialing VALUE = DIALING DIGIT 0 - 9 Digit. 10 = NONE FACTORY SETTING: NONE Function 21: Enter Directory Codes ENTER DIRECTORY CODES FCN 21 (AE1000Plus an
ページ7に含まれる内容の要旨
8 Local Programming Functions (Continued) Function 31: Enter Entry Codes ENTER ENTRY CODES FCN 31 Entry Codes can be added using this function. In AccessBase2000 system, Entry Codes may have variable length from one to eight digits. 31#CODE#CODE# However, in Local Programming mode, the length of Entry Code is fi xed at four digits. CODE = THE FOUR-DIGIT ENTRY CODE TO ADD Function 33: Delete Entry Codes DELETE ENTRY CODES FCN 33 Entry codes can be deleted from the Controller using this function
ページ8に含まれる内容の要旨
8 Local Programming Functions (Continued) Function 44: Set Button Schedule SET BUTTON SCHEDULE FCN 44 Access relays can be programmed to activate from a specifi c button on multi-button transmitters. Use this function to assign a button for each 44#RLY-A#RLY-B#RLY-C#RLY-D# relay. Enter the button position number (0-8) for each relay. Enter # for 4 = TOP any relay that will not have a transmitter button assigned. RLY A = RELAY A BUTTON 0 = NONE 5 = TOP LEFT RLY B = RELAY B BUTTON 1 = ANY 6 = TO
ページ9に含まれる内容の要旨
8 Local Programming Functions (Continued) Function 57: Welcome Display Text EDIT WELCOME DISPLAY TEXT FCN 57 The welcome text displayed by the Controller can be modifi ed using this function. Refer to the keypad alphanumeric key fi gure shown on Page 4 for keypad details. 57#LINE 1#LINE 2# LINE 1 = TEXT FOR FIRST LINE OF THE DISPLAY LINE 2 = TEXT FOR THE SECOND LINE OF THE DISPLAY SET TALK TIME FCN 64 Function 64: Set Talk Time (AE1000Plus and AE200Plus Only) 64#TIME# The length of time allowed
ページ10に含まれる内容の要旨
9 Programming Worksheet FCN # USAGE FACTORY DEFAULT CUSTOM SETTING 01 CHANGE MASTER PASSWORD 123456 __________ MASTER PASSWORD (6-DIGITS) 02 DIRECTORY NUMBER LENGTH 3 DIGITS _____ DIGITS (1-4 DIGITS) 20 PBX DIALING DIGIT NONE _____ (0-9, 10 = NONE) 64 MAXIMUM VISITOR TALK TIME 60 SECONDS _____ SECONDS (15-255 SECONDS) 67 POSTAL KEY RELAY CHANNEL RELAY A ❑ RELAY “A” ❑ RELAY “B” ❑ RELAY “C” ❑ RELAY “D” FUNCTION 06 TIME ZONES TIME ZONE # ACTIVE DAYS 1ST START HR/MIN 1ST END HR/MIN 2ND START HR/
ページ11に含まれる内容の要旨
FUNCTION 65 REMOTE DEVICE SETUP DEVICE # DEVICE TYPE ACTIVATION OUTPUT ❑ NONE (0) ❑ REMOTE KEYPAD (1) ❑ RADIO (2) ❑ WIEGAND26 (3) ❑ RELAY A (1) ❑ RELAY B (2) ❑ RELAY C (3) ❑ RELAY D (4) DEVICE #1 ❑ WIEGAND30 (4) ❑ WEIGAND31 (5) ❑ TELEPHONE INTERFACE (7) ❑ BUTTONS(5) ❑ NONE (0) ❑ REMOTE KEYPAD (1) ❑ RADIO (2) ❑ WIEGAND26 (3) ❑ RELAY A (1) ❑ RELAY B (2) ❑ RELAY C (3) ❑ RELAY D (4) DEVICE #2 ❑ WIEGAND30 (4) ❑ WEIGAND31 (5) ❑ TELEPHONE INTERFACE (7) ❑ BUTTONS(5) ❑ NONE (0) ❑
ページ12に含まれる内容の要旨
Copyright © 2008 Linear LLC 228505 A
