ページ1に含まれる内容の要旨
CL330
MULTIFUNCTION TELEPHONE
User guide P2
2LMC59YY
Notice D'utilisation P38
1
ページ2に含まれる内容の要旨
CONTENTS CONTENTS 1 INTRODUCTION 3 Unpacking the Telephone 4 DESCRIPTION 5 General Description 5 LCD Screen Description 7 Menu Navigation 7 INSTALLATION 8 Setting Up 8 Wall Mounting 10 SETTINGS 11 Language Setting 11 Screen Contrast Setting 12 Time Setting 13 Voice Function Setting 14 Flash (Recall) Setting 15 Dialling Mode (Tone/Pulse) Setting 15 Ringer Volume Setting 16
ページ3に含まれる内容の要旨
CONTENTS CALLER DISPLAY 22 View Caller Display List 23 Dial a Number from the Caller Display List 23 Delete an Entry from the Caller Display List 24 Delete all Entries from the Caller Display List 24 Copying a Number to the Phone Book 25 PHONE BOOK 26 Create a Phone Book Entry 26 Store/Change a Name Recording 28 Delete a Name Recording 29 View Phone Book Entries 29 Dialling using a Phone Book Entry 30 Modify a Phone Book Entry 30
ページ4に含まれる内容の要旨
INTRODUCTION Congratulations on purchasing your Geemarc CL330 telephone. This is a multifunction telephone which offers features such as hands free use, phone book, caller display* and voice announcing. Its is important that you read the instructions below in order to use your Geemarc telephone to its full potential. Keep this user guide in a safe place for future reference. This guide explains how to use the following telephone: CL330 *To use the caller display facility
ページ5に含まれる内容の要旨
INTRODUCTION Unpacking the Telephone When unpacking the telephone, you should find the following in the box: • 1 CL330 unit • 1 CL330 handset with curly cord • 1 Mains power adaptor • 1 Telephone line cord • 1 User Guide For product support and help visit our website at www.geemarc.com Telephone 01707 384438 Or fax 01707 372529 4
ページ6に含まれる内容の要旨
DESCRIPTION General Description 1 CALL# CLIP 2 11 12 OK MENU C 3 13 4 14 TONE VOLUME 5 15 M1 6 ? 16 7 M2 17 8 18 M3 M4 19 9 20 21 22 R 23 24 10 25 26 5
ページ7に含まれる内容の要旨
DESCRIPTION 1= LED (flashes when a new call has been received)* 2= Delete 3= Call back, confirm 4= Tone slide control 5= Amplify LED 6= Caller ID mode button 7= Amplify button 8= Speakerphone volume slide control 9= Handset 10= Mute 11= Scroll left 12= Menu 13= Scroll right 14= Earpiece volume control 15= Quick Dial M1 (emergency call number 1) 16= Phone book 17= Quick Dial M2 (emergency call number 2) 18= Quick Dial M3 (emergency call number 3) 19= Quick Dial M4 (em
ページ8に含まれる内容の要旨
DESCRIPTION LCD Screen Description Battery Low Icon level Time and Date 9:52 9/12 TOTAL:04 NEW:02 New Calls Calls Received Received This LCD display shows the total number of calls and the number of new calls ready to be reviewed. In this example you have a total of 4 calls which includes two new calls. 9:52 9/12 call# 02 Caller’s Number 01517222277 Caller’s Name ROBERT JONES Menu Naviga
ページ9に含まれる内容の要旨
INSTALLATION Setting Up Connect the handset to one end of the curly cord. The connector at the end of the curly cord plugs into the socket on the left hand side of the CL330 unit. Open the battery compartment (push the small clip backwards and then upwards). Insert 4 good quality alkaline batteries (AA size, 1.5V type, not supplied) into the battery compartment located on the base of the telephone. Replace the battery cover. If the batteries are running low, the low battery icon
ページ10に含まれる内容の要旨
INSTALLATION Note: Mains power is required to power the multifunction features of the telephone. Fit 4 x AA sized batteries in order to save and use stored numbers in case of mains power failure. Without mains or battery power, the telephone can still be used to answer calls or to manually dial out calls but all the multifunction features will not be available. If no batteries are inserted, the low battery icon will be displayed on the LCD display.
ページ11に含まれる内容の要旨
INSTALLATION Wall Mounting Drill two holes vertically one above the other, 83mm apart, and leave the screws protruding from the wall by 5mm. Caution: Ensure there are no electrical lines, water pipes etc. in the wall where the holes are drilled. Turn the hook in the receiver cradle so that the receiver can be placed on-hook. Then hang up the telephone directly into the screws 10
ページ12に含まれる内容の要旨
SETTINGS Language Setting You can choose between 5 different languages. Each language has voice announcements available in that language. Press MENU Use ⊳ or to select LANGUAGE Press OK to confirm Use ⊳ or to select the desired language Press OK to confirm Press or C to exit 11
ページ13に含まれる内容の要旨
SETTINGS Screen Contrast Setting Your screen has a backlight which automatically switches off after 15 seconds of inactivity. The contrast of the backlight against the text can be increased or decreased. Press MENU Use ⊳ or to select LCD CONTRAST Press OK to confirm Use ⊳ or to select the desired contrast setting (3=normal) Press OK to confirm Press to exit 12
ページ14に含まれる内容の要旨
SETTINGS Time Setting If you subscribe to a Caller Display service, the date and time will be set whenever you receive a call. However, if you do not subscribe to this service, you will need to set the date and time manually. Press MENU Use ⊳ or to select TIME/DATE Press OK to confirm The HOUR digit will flash. Use ⊳ or to select the correct hour Press OK to confirm The MINUTE digits will flash. Use ⊳ or to select the correct minute
ページ15に含まれる内容の要旨
SETTINGS Voice Function Setting When the VOICE function is ON, in pre-dial mode numbers 0-9, numbers held in the call log, numbers held in the phone book and a caller’s name (if recorded, see Phonebook Chapter – Storing Name Recording) will be announced in the loudspeaker. Press MENU Use ⊳ or to select VOICE Press OK to confirm Use ⊳ or to select ON/OFF Press OK to confirm Press to exit 14
ページ16に含まれる内容の要旨
SETTINGS Flash (Recall) Setting Your phone works with a time break recall for United Kingdom (R=100ms). In France, flash time setting should be R=300ms. This value can be set to 100, 300 or 600. Press MENU Use ⊳ or to select FLASH Press OK to confirm Use ⊳ or to select 100/300/600 Press OK to confirm Press to exit Dialling Mode (Tone/Pulse) Settings In the UK, all telephone exchanges now use Tone dialing. If your phone does not dial o
ページ17に含まれる内容の要旨
SETTINGS Ringer Volume Setting A switch located on the right side of the CL330 unit allows the ringer to be switched to LOW, MEDIUM or HIGH. Ringer Tone Setting 3 choices are available Press MENU Use ⊳ or to select RINGER TONE Press OK to confirm Use ⊳ or to select 1 , 2 or 3 Press OK to confirm 16
ページ18に含まれる内容の要旨
USING THE TELEPHONE Making a Call Pick up the handset. When you hear the dialling tone, dial the number on the keypad. The number will be displayed on the LCD display To end the call simply replace the handset in the cradle Pre-dialling If VOICE is activated, once you press the number keys 0-9 you will hear the number being dialled. Key in the required number without lifting the handset.. Use C if necessary to cancel and correct a wrong digit Lift
ページ19に含まれる内容の要旨
USING THE TELEPHONE Making a Call – Hands Free Dial the number on the keypad in the on-hook position Use C if necessary to cancel and correct a wrong digit Press and the number will be dialled automatically. The handsfree function (speaker) is now activated and the LED indicator next to the button will be illuminated. When the third party answers the call, you may speak with the telephone in the hands free mode ( handset in the cradle). Speak towards the mi
ページ20に含まれる内容の要旨
USING THE TELEPHONE Receiving a Call When an incoming call is received, the telephone rings. If the caller can be identified (due to subscription to a Caller Display service), the caller’s telephone number will be displayed. The caller’s name will also be displayed provided that the number and name stored are in the phone book. If the VOICE setting is ON and the caller can be identified and a voice recording is associated with the incoming call, the voice recording will be heard thr
