ページ1に含まれる内容の要旨
User’s manual
1856
Speakerphone/
answering system with
caller ID/call waiting
ページ2に含まれる内容の要旨
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important product information on pages 36-37 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: 1856 Product name: Speakerphone/answering system S
ページ3に含まれる内容の要旨
You must install the See page 5 power adapter before STOP! for easy instructions. using the telephone. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Read and understand all instructions in the user’s manual. • Avoid using a telephone during a thunderstorm. •
ページ4に含まれる内容の要旨
User’s manual 1856 Speakerphone/ answering system with caller ID/call waiting Table of contents Getting started Answering system operation Quick reference guide .........................2 Answering system operation ........19 Parts checklist .........................................3 Answering system mode ..............20 Before you install ..................................4 Day & time announcements .........21 Telephone base installation .............5 Outgoing announcements .............22
ページ5に含まれる内容の要旨
Getting started Quick reference guide FLASH CID During a call, press to receive When the telephone is idle, an incoming call if call waiting is press to display caller ID infor- activated (page 11). mation (page 17). While enter- ing numbers, press twice to insert a three-second dialing DISPLAY DIAL pause (page 13). Press to dial the number cur- REMOVE rently displayed (page 17). Press to delete caller ID cu
ページ6に含まれる内容の要旨
Getting started Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Check to make sure the telephone package includes the following: User’s manual Quick start guide 1856 1856 Speakerphone/ Speakerphone/ answering system with answering system with caller ID/call waiting caller ID/call waiting User's manual Quick start guide Telephone base with wall Handset Handset cord mount bracket attached Power adapter Telepho
ページ7に含まれる内容の要旨
Getting started Before you install Choose a central location close to a telephone jack and an electrical outlet not controlled by a wall switch. The telephone can be placed on a flat surface or mounted on a standard wall plate. Avoid placing the telephone base too close to: • Excessive heat sources. • Excessive dust sources such as a workshop or garage. • Excessive moisture. • Extremely low temperature. • Mechanical vibration or shock such as on top of the washing machine or work bench.
ページ8に含まれる内容の要旨
Getting started Telephone base installation Install the telephone as shown below. Choose a location where the telephone is not exposed to excessive heat, cold, dust or moisture. 1. Plug one end of the telephone line cord into the telephone jack at the back of the telephone. 4 2. Plug the small end of the power adapter into the power 5 jack at the back of the tele- phone. 3. Route cords through slots. 4. Plug the other end of the tele- phone line cord into a telephone 2 1 3 jack. 5. Plug th
ページ9に含まれる内容の要旨
Getting started Installation options NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions. Wall mount Tabletop mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting plate with studs may be available for purchase from many hardware or consumer electronics
ページ10に含まれる内容の要旨
Getting started Installation options 3. Connect the telephone line cord and power adapter to the jacks on the back of the telephone base. Bundle the tel- ephone cord, and secure it with a twist tie before placing it inside the bracket. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs.
ページ11に含まれる内容の要旨
Telephone operation Telephone settings You can change settings to program how the telephone works. Press CID/SETUP repeatedly until the feature you want is displayed. Press or CID to change set- tings. Press CID/SETUP again to accept the new setting and move to next feature. Press FLASH any time to exit. Contrast There are five contrast levels (1-5). Press or CID MSG# to adjust screen contrast to maximize readability in 0 4 different lighting conditions. SET CONTRAST Call history P
ページ12に含まれる内容の要旨
Telephone operation Telephone settings Language Press or CID to select the language used in MSG# all menus and screen displays. You can choose 0 ENGLISH, ESPANOL or FRANCAIS. WHICH LANGUAGE? Home area code/local area codes You can program this phone to recognize one home area code and up to four local area codes. If you simply dial the last seven digits of a tel- ephone number to make a call within your own area code, you should enter your own area code into the telephone as the home
ページ13に含まれる内容の要旨
Telephone operation Telephone operation Making and answering calls To make a call, lift the handset or press SPEAKER, then dial a number. Replace the handset or press SPEAKER to hang up. To answer a call, lift the handset, or press SPEAKER to use the speakerphone. Last number redial MSG# The most recently dialed number is displayed 0 5550100 when you lift the handset or press SPEAKER. REDIAL Press REDIAL to dial it. To adjust ringer volume To adjust the ringer volume, press the VOLUM
ページ14に含まれる内容の要旨
Telephone operation Options while on calls volume level To adjust listening volume MSG# While on calls, press VOLUME to adjust the lis- 4 tening volume. 5550100 There are eight volume levels for the speakerphone, and four levels for the handset. Press or once to increase or lower the listening volume by one level. FLASH If you subscribe to a call waiting service with your local telephone service provider and the CID-CALL WAIT feature is on, you will hear a beep and the screen will di
ページ15に含まれる内容の要旨
Directory Directory Memory capacity MSG# The telephone can store up to 12 (three one- 0 5550100 touch and nine speed dial) numbers in memory locations for quick dialing. Each memory location can store a number up to 24 digits. Timeouts and error messages If you pause for too long while creating an entry, the procedure will time out and it will be neces- sary to start again. If you store a number in a memory location that is already in use, the old Directory card number will be overwritte
ページ16に含まれる内容の要旨
Directory Speed dialing You can enter nine speed dial numbers of up to 24 digits. Each number is stored in a one-digit speed dial location (1-9). MSG# 0 5550100_ To store a number in speed dial ENTER NUMBER 1. Press PROG/MEM. 2. Enter a telephone number (up to 24 digits), or import one by pressing REDIAL. 3. Press PROG/MEM. 4. Press a digit to select a speed dial location (1-9). Press to erase numbers if you make a mistake. MSG# Press CID twice to enter a three-second dial- 0 ing
ページ17に含まれる内容の要旨
Directory One-touch dialing Telephone numbers called most frequently can be stored in one-touch locations so that they can be dialed with only one key press. You can enter three telephone numbers up to 24 digits. There are three (M1, M2, M3) one-touch MSG# keys on your telephone. 0 5550100_ ENTER NUMBER To store number in one-touch 1. Press PROG/MEM. 2. Enter a telephone number (up to 24 digits), or import one by pressing REDIAL. 3. Press PROG/MEM. 4. Press a one-touch key (M1, M2,
ページ18に含まれる内容の要旨
Caller ID history Caller ID history Information about caller ID with call waiting This product has a caller ID function with call waiting feature which works with service from your local telephone company. Caller ID with call waiting lets you see the name and telephone number of the caller before NEW MSG# answering the telephone, even when on another No: 1 12:34 10-23 PM 0 call. 555-0100 PAT WILLIAMS It may be necessary to change your telephone service to use this feature. Contact you
ページ19に含まれる内容の要旨
Caller ID history Caller ID history How caller ID works If you subscribe to caller ID service provided by your local telephone company, information about each caller will be displayed between the first and second ring. NEW 12:34 10-23 MSG# No: 1 PM MSG# 0 555-0100 0 PAT WILLIAMS 22 CALLS 4 NEW New calls (unviewed) Total calls New call (un-reviewed) Time/date of call Repeat call NEW REP MSG# No: 1 12:34 10-23 PM Light on: un- Call number reviewed call(s) 0 555-0100 (1-50) PA
ページ20に含まれる内容の要旨
Caller ID history To review the call history To review the call history 12:55 10-23 PM MSG# No: 2 Press or CID to display the most recent call. 0 555-4321 Press or CID repeatedly to scroll through the CHRIS THOMPSON list of earlier calls. To return a call To dial a number that is currently displayed, press MSG# No: 12:34 10-23 PM DISPLAY DIAL and then lift the handset or press 1 0 555-0100 SPEAKER (see below for important dialing PAT WILLIAMS options). If you forget to lift the h
