ページ1に含まれる内容の要旨
FPC 5084
All-in-One
8.4” SVGA TFT Fanless Touch Panel
TM
®
Computer with Intel Atom N270
Processor Onboard
User’s Manual
ページ2に含まれる内容の要旨
Disclaimers This manual has been carefully checked and believed to contain accurate information. Acnodes Corporation assumes no responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use. ACNODES does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. ACNODES does not make any commitment to update the information in this
ページ3に含まれる内容の要旨
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with proper instructions, this equipment might generate or radiate radio frequency energy and cause harmful interference to radio
ページ4に含まれる内容の要旨
Safety Precautions Before getting started, please read the following important safety precautions. 1. The FPC 5084 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static- shielded devices. Most electronic components are se
ページ5に含まれる内容の要旨
Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist- grounding strap, available from most electronic component stores. Trademarks Acknowledgments ACNODES is a trademark of ACNODES Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of Internationa
ページ6に含まれる内容の要旨
Table of Contents Disclaimers ..........................................................................ii Safety Approvals................................................................. iii Safety Precautions..............................................................iv CHAPTER 1 INTRODUCTION ....................................... 1 1.1 General Description ............................................ 1 1.2 Specifications...................................................... 2
ページ7に含まれる内容の要旨
CHAPTER 4 DRIVERS INSTALLATION...................... 58 4.1 System .............................................................. 58 4.2 Touch Screen ................................................... 59 4.2.1 Specification.............................................................. 59 4.2.2 Driver Installation- Windows XP ............................... 59 4.3 Embedded O.S. ................................................ 62 4.3.1 Windows XP Embedded .............
ページ8に含まれる内容の要旨
MEMO viii
ページ9に含まれる内容の要旨
FPC 5084 User Manual CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the FPC 5084. Chapter 1 includes the following sections: General Description Specification Dimensions I/O Outlets Package List 1.1 General Description The FPC 5084 is a fan-less and compact-size touch panel computer, equipped with a 8.4” TFT LCD display and low power consumption TM ○ R Intel Atom N270 1.6GHz proce
ページ10に含まれる内容の要旨
FPC 5084 CompactFlash™ card, which makes it suitable for vibration environments. Embedded O.S. Supported ® The FPC 5084 not only supports Windows XP, but also ® supports embedded OS, such as Windows CE.NET, and ® Windows XP embedded. For storage device, the FPC 5084 830 supports CompactFlash™ card. Industrial-grade Product Design The FPC 5084 has an incredible design to be used in different industrial environments. The front bezel meets the IP65/NEM
ページ11に含まれる内容の要旨
FPC 5084 User Manual 1.2.2 I/O System Standard I/O One RS-232 and one RS-232/422/485 Two USB 2.0 Ethernet One RTL81111b Gigabit Ethernet Audio One Line-out Expansion One Mini card Storage One socket for CF card Box-header Two 2×5 box header for COM3, COM4 1.2.3 System Specification 8.4” TFT LCD Heat Dispensing Design Net Weight 1.3 Kgs (2.87 lb) Dimension (Main Body Size) 251x205x 44
ページ12に含まれる内容の要旨
FPC 5084 NOTE All specifications and images are subject to change without notice. NOTE If it is operated in high temperature environment, the wide temperature DRAM is reommended. Introduction 4
ページ13に含まれる内容の要旨
FPC 5084 User Manual 1.3 Dimensions This diagram shows you dimensions and outlines of the FPC 5084 830. Introduction 5
ページ14に含まれる内容の要旨
FPC 5084 Introduction 6
ページ15に含まれる内容の要旨
FPC 5084 User Manual 1.4 I/O Outlets Please refer to the following illustration for I/O locations of the FPC-5084. No Function 1 POWER SWITCH (ATX) 2 10-30VDC POWER Input 3 COM 1 (RS-232/422/485) 4 COM 2 (RS-232) 5 VGA 6 ETHERNET (RJ-45) 7 USB 2.0 X 2 8 AUDIO (LINE-OUT) Introduction 7
ページ16に含まれる内容の要旨
FPC 5084 1.5 Packing List When you receive the FPC 5084, the bundled package should contain the following items: FPC 5084 x 1 Panel Mount Kit x 6 Driver CD x1 Wall-Mount Kit x1 Desktop Stand Kit (optional) VESA ARM (optional) Power Adapter (optional) If you can not find the package or any items are missing, please contact ACNODES distributors immediately. Introduction 8
ページ17に含まれる内容の要旨
FPC 5084 User Manual CHAPTER 2 HARDWARE INSTALLATION The FPC 5084 provides rich I/O ports and flexible expansions for you to meet different demand, for example, CF card. The chapter will show you how to install the hardware. It includes: CompactFlash™ Card Serial Port Ethernet Mounting Way Dram Wireless LAN Card 2.1 CF card Installation The FPC 5084 provides one CF socket for users to install CompactFlash™ card. Please refer to the following in
ページ18に含まれる内容の要旨
FPC 5084 Step 2 Find out the cover on the side of the system. TM Step 3 Locate the CompactFlash socket, and insert the card into the socket. 10 Hardware Installation
ページ19に含まれる内容の要旨
FPC 5084 User Manual 2.2 Serial Ports Interface The FPC 5084 has two onboard serial ports, COM1 (RS-232/ 422/ 485) and COM2 (RS-232). The following table shows you the pin assignments of this connector: Pin Signal Pin Signal 1 Data Carrier Detect (DCD) 6 Data Set Ready (DSR) 2 Receive Data (RXD) 7 Request To Send (RTS) 3 Transmit Data (TXD) 8 Clear To Send (CTS) 4 Data Terminal Ready (DTR) 9 Ring Indicator (RI) 5 Ground (GND) In addition, COM1 can be set for
ページ20に含まれる内容の要旨
FPC 5084 When COM1 is set to RS-422 or RS-485, the pin assignments are listed below: Signal Name Pin # RS-422 RS-485 1 TX- DATA- 2 TX+ DATA+ 3 RX+ No connector 4 RX- No connector 5 No connector No connector 6 No connector No connector 7 No connector No connector 8 No connector No connector 9 GND GND 12 Hardware Installation
