ページ1に含まれる内容の要旨
R R R Ru u u ug g g gg g g ge e e ed d d dS S S Sw w w wiiiit t t tc c c ch h h h
R R R RS S S S5 5 5 50 0 0 00 0 0 0
I In ns st ta alllla at tiio on n G Gu uiid de e
I In ns st ta alllla at tiio on n G Gu uiid de e
RuggedCom Inc.
30 Whitmore Road,
Woodbridge, Ontario
Canada L4L 7Z4
Web: www.ruggedcom.com
Tel: (905) 856-5288
Fax: (905) 856-1995
Toll Free: (888) 264-0006
ページ2に含まれる内容の要旨
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and cad radiate radio frequency energy and, if not installed and used in accordance with the instruction man
ページ3に含まれる内容の要旨
Table of Contents 1 Product Overview.....................................................................................................................4 1.1 Functional Overview............................................................................................... 4 1.2 Feature Highlights.................................................................................................. 4 1.3 RS500 Front Panel Description .............................................................
ページ4に含まれる内容の要旨
1 Product Overview 1.1 Functional Overview The RuggedSwitch RS500 is a substation hardened, fiber optical Ethernet switch specifically designed to operate in harsh environments such as those found in electric utility substations and harsh industrial environments. The RS500 provides 4 10BaseFL fiber optical ports and one 100BaseFX port. Specifically tested to the same standards as mission critical protective relaying equipment (i.e. ANSI/IEEE C37.90 and IEC 60255) the RS500 is idea
ページ5に含まれる内容の要旨
1.3 RS500 Front Panel Description Front Panel View 10BaseFL Ports 100BaseFX Port ST Connectors MTRJ Connector LED Indicators LINK/Activity POWER LED Rx (Receive) Tx (Transmit) Failsafe Output Power Relay DC(+) Normally Open Common DC(-) Surge Ground Normally Closed Reset Safety Ground Stud Fig. 1.3.1 RS500 Front Panel Detail ITEM Activity Comments LINK LED (Yellow) Solid Link Established Blinking – Once per second Tx, Rx Activity Tx LED (Red) Blinking Tx (Transmit) Activity Rx LED
ページ6に含まれる内容の要旨
1.4 RS500 Top and Bottom View Top View DIN Rail Mounting Bracket 100BaseFX Port 10BaseFL Ports MTRJ Connector ST Connectors Safety Ground Bottom View Reset Stud Failsafe Output Relay DC(+) DC(-) DIN Rail Mounting Bracket Surge Ground Fig. 1.4.1 RS500 Top and Bottom View 6 2008 RuggedCom Inc. All rights reserved Rev101
ページ7に含まれる内容の要旨
2 Installation 2.1 DIN Rail Mounting RS500 DIN Rail Mounting & Release Front View Side View DIN RAIL DIN RAIL Mounting Latch DIN RAIL Release Slot Release Direction Release Action Screw Driver Fig. 2.1.1 RS500 Rail Mounting 7 2008 RuggedCom Inc. All rights reserved Rev101
ページ8に含まれる内容の要旨
2.2 Power Supply Wiring and Grounding Safety Ground Stud DC(+) DC(-) Surge Ground Fig. 2.2.1 RS500 Power Supply Inputs The power supply input is connected as follows: 1. + = DC (+) is connected to the positive (+) terminal if the power source is DC or to the (Hot) terminal if the power source is AC. 2. - = DC (-) is connected to the negative (-) terminal if the power source is DC or to the (Neutral) terminal if the power source is AC. 3. Surge Ground is used as the ground conductor fo
ページ9に含まれる内容の要旨
2.2.1 Power Supply - DC Input Fig. 2.2.2 Power Supply – DC Input Note: Ground bus can either be connected to the Ground Stud on the rear of the RS500 chassis, or the Surge Ground port on the screw-in terminal block. 9 2008 RuggedCom Inc. All rights reserved Rev101
ページ10に含まれる内容の要旨
2.3 HIPOT (Dielectric Strength) Testing HIPOT Dielectric strength testing cannot be performed in the field due to transient/surge suppression circuitry connected to the RS500 Surge/Chassis Ground. All RuggedSwitch products are HIPOT tested according to IEC 60255-5 (Section 6) during final test. 10 2008 RuggedCom Inc. All rights reserved Rev101
ページ11に含まれる内容の要旨
2.4 Failsafe Output Wiring and Specifications The “Failsafe” output relay is provided to signal critical error conditions that may occur on the RS500. The contacts are energized upon power up of the unit and remain energized until a critical error occurs. RS500 Failsafe Relay Outputs Normally Closed Common Normally Open *** Normal contact state prior to power being applied to unit. *** 11 2008 RuggedCom Inc. All rights reserved Rev101
ページ12に含まれる内容の要旨
3 Technical Specifications 3.1 Power Supply Specifications Power Supply Type Minimum Maximum Fuse Rating Maximum Power Input Input Consumption 24 VDC 18 VDC 36 VDC 5A(F) 48 VDC 36 VDC 59 VDC 3.15A(T) 10 W HI (110 VDC) 88 VDC 150 VDC 3.15A(T) NOTES: 1. (T) denotes time-delay fuse 2. For continued protection against risk of fire, replace only with same type and rating of fuse. 3.2 Failsafe Relay Specifications Parameter Value (Resistive) Max Switching Voltage 30VAC, 80VDC
ページ13に含まれる内容の要旨
3.4 Fiber Optical Specifications Ports 1 to 4 Uplink Parameter 10Mbps Ports 100Mbps Port Multi-Mode Single-Mode* Multi-Mode Single-Mode* Speed Standard 10BaseFL 100BaseFX Connector Type ST MTRJ LC Segment Length 2 km 15 km 2 km 15 km Optical Wavelength 820nm 1310nm 1300nm 1310nm Cable Size 62.5/125μm 9/125μm 62.5/125μm 9/125μm Core/Cladding Optical Tx Power -13.5/-7.6 -23/-15 -16/-11 -15/-8 Min/Max (dBm Peak) Optical Rx Sensitivity -34.4 -38 -33.5 -31 (dBm Average) Max Optical
ページ14に含まれる内容の要旨
3.6 Type Test Specifications Electrical Safety Levels Comments Dielectric Withstand 2 kV rms for 1 minute ANSI/IEEE C37.90 (1989) IEC 60255-5 (Section 6) High Voltage Impulse 5 kV peak IEC 60255-5 (Section 8) Insulation Resistance 500 VDC for 1 minute IEC 60255-5 (Section 6 Electrical Environment Levels Comments High Frequency Disturbance 2.5 kV @ 1MHz for 2s ANSI/IEEE C37.90.1 (Oscillatory) IEC 60255-22-1 IEC Surge 4 kV / 2 kV IEC 61000-4-5 (Level 4) IEC Fast Transient 2 kV / 1
ページ15に含まれる内容の要旨
3.7 Operating Environment Parameter Range Comments Ambient Operating Ambient Temperature as -40 to 85°C Temperature measured from a 30cm radius surrounding the center of the R500 enclosure. Ambient Relative Humidity 5% to 95% Non-condensing Ambient Storage -40 to 85°C Temperature 3.8 Physical Dimensions 15 2008 RuggedCom Inc. All rights reserved Rev101
ページ16に含まれる内容の要旨
Parameter Value Comments (Length x Width x Height) Dimensions 8.0 x 6.84 x 2.43 inches with mounting brackets (203,20) x (173,74) x (61,72) mm installed Weight 5 lb (2.25 Kg) Enclosure 18 gauge Galvanized Steel 3.9 Agency Approvals Agency Standards Comments CSA C22.2 No. 60950, UL 60950, EN 60950 cCSAus, CE Approved EN 61000-6-2 FCC FCC Part 15, Class A Approved 4 Warranty RuggedCom warrants this product for a period of five (5) years from date of purchase. For wa
