ページ1に含まれる内容の要旨
Mid-Span Power Hub
20-Port and 10-Port
User’s Guide
Title
P/N 9033928-02
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Electrical Hazard: Only qualified personnel should perform installation procedures. Notice Enterasys Networks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such changes have been made. The hardware, firmware, or software described in this document is subject to change without notice. IN NO EVENT SHALL ENTERASYS NETWORK
ページ4に含まれる内容の要旨
Industry Canada Notice This digital apparatus does not exceed the class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. Class A ITE Notic
ページ5に含まれる内容の要旨
Declaration of Conformity Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Enterasys Networks, Inc. Manufacturer’s Address: 50 Minuteman Road Andover, MA 01810 USA European Representative Address: Enterasys Networks, Ltd. Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EN 55022 EN 55024 EC Directive 73/23/EEC EN 60950 Equipment Type/Environment: Networking Equi
ページ6に含まれる内容の要旨
Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between the end user (“You”) and Enterasys Networks, Inc. on behalf of itself and its Affiliates (as hereinafter defined) (“Enterasys”) that sets forth Your rights and obligations with respect to the Enterasys software program/firmware installed on the Enterasys product (including any accompanying documentation
ページ7に含まれる内容の要旨
3. APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and federal courts of the Commonwealth of Massachusetts without regard to its conflicts of laws provisions. You accept the personal jurisdiction and venue of the Commonwealth of Massachusetts courts. None of the 1980 United Nations Convention on Contracts for the International Sale of Goods, the United Nations Convention on the Limitation Period in the International Sale of Goods, and the Unif
ページ8に含まれる内容の要旨
8. AUDIT RIGHTS. You hereby acknowledge that the intellectual property rights associated with the Program are of critical value to Enterasys and, accordingly, You hereby agree to maintain complete books, records and accounts showing (i) license fees due and paid, and (ii) the use, copying and deployment of the Program. You also grant to Enterasys and its authorized representatives, upon reasonable notice, the right to audit and examine during Your normal business hours, Your books, records,
ページ9に含まれる内容の要旨
Contents About This Guide Purpose ................................................................................................................................................ ix Who Should Use This Guide ................................................................................................................ ix Document Conventions ........................................................................................................................ ix Getting Help ..................
ページ10に含まれる内容の要旨
Figures 2-1 BL-89420ENT, BL-89520ENT, BL-89620ENT, or BL-89720ENT 20-Port Mid-Span Power Hub 2-2 2-2 BL-89710ENT 10-Port Mid-Span Power Hub...............................................................................2-2 2-3 BL-89420ENT, BL-89520ENT, BL-89620ENT, or BL-89720ENT Power Hub with Splitter..........2-4 2-4 Individual Module for the 20- and 10-Port Chassis (BL-89400ENT, BL-89500ENT, BL-89600ENT, and BL-89700ENT) ...........................................2-6 Tables 3-1 Troubleshooti
ページ11に含まれる内容の要旨
About This Guide Purpose This guide provides information and procedures on hardware installation, setup, configuration, and management of the Enterasys Networks 20-port and 10-port Mid-Span Power Hubs. Who Should Use This Guide Electrical Hazard: Only qualified personnel should perform the installation procedures described in this guide. This guide is intended for administrative and technical personnel responsible for installing and managing Enterasys Networks products. To use this guide ef
ページ12に含まれる内容の要旨
Getting Help For additional support related to the Mid-Span Power Hub or this document, contact Enterasys Networks using one of the following methods: World Wide Web http://www.enterasys.com/support Phone 603-332-9400 1-800-872-8440 (toll-free in U.S. and Canada) For the Enterasys Networks Support toll-free number in your country: http://www.enterasys.com/support/gtac-all.html Internet mail support@enterasys.com To expedite your message, please type [eth] in the subject line. To send comments
ページ13に含まれる内容の要旨
1 Introduction Functions and Features The BL-89220ENT, BL-89420ENT, BL-89520ENT, BL-89620ENT, and BL-89720ENT 20-port Mid-Span Power Hub and the BL-89210ENT and BL-89710ENT 10-port Mid-Span Power Hub support applications in which AC power is difficult to access, such as VoIP phones, wireless LAN access points or Internet security cameras. The Enterasys 20-port and 10-port Mid-Span Power Hubs act as “patch panels” and add ~48 VDC to unused (non-data) wires in standard Category 5, 5e, or 6 Et
ページ14に含まれる内容の要旨
Port Indicators 1-2 Introduction
ページ15に含まれる内容の要旨
2 Installation and Connection Electrical Hazard: Only qualified personnel should install or service this unit. Verifying the Kit Unpack the unit and verify that you have all of the following items (See Figure 2-1 and Figure 2-2 on page 2-2): • Enterasys’ 20-port or 10-port Mid-Span Power Hub •Power Cord •User’s Guide Mid-Span Power Hub 20-Port and 10-Port User’s Guide 2-1
ページ16に含まれる内容の要旨
User’s Guide User’s Guide Kit Contents Kit Contents Figure 2-1 BL-89420ENT, BL-89520ENT, BL-89620ENT, or BL-89720ENT 20-Port Mid-Span Power Hub Power Cord Figure 2-2 BL-89710ENT 10-Port Mid-Span Power Hub Power Cord The 20-port Mid-Span Power Hub may be placed on a shelf or mounted in a standard 19-inch rack. The 10-port Mid-Span Power Hub may be placed on a shelf or mounted in a standard 19-inch rack using the BL-89210-RMENT rack mount kit (optional). 2-2 Installation and Connection
ページ17に含まれる内容の要旨
Technical Considerations Technical Considerations Before you mount the unit to a fixed location, consider the following: • Determine optimal placement. • Collect and document network information as required. • Ensure the cable length from the Ethernet network source to the powered device does not exceed 100 meters. Note: The unit is not a repeater and does not amplify the Ethernet data signal. Caution: Observe the following requirements when mounting the Enterasys 20-port or 10-port Mid-span P
ページ18に含まれる内容の要旨
Using a Splitter with the 20-Port and 10-Port Mid-Span Power Hubs Using a Splitter with the 20-Port and 10-Port Mid-Span Power Hubs Some products require a BL-89705ENT or BL-89712ENT splitter (sold separately) that splits power and data into separate cables, and converts the ~48 VDC into 5.0 VDC or 12.0 VDC for input power. To ensure compliance with class A requirements, use category 5, 5e, or 6 shielded twisted pair straight-through cables. Figure 2-3 shows a typical configuration
ページ19に含まれる内容の要旨
Powering Up Powering Up Simply plug one end of the power cord into the unit, and the other end into a grounded AC power source. Units are typically connected to a power strip or other power outlet that may be cycled on and off. An uninterruptible power supply may also be used. Check to make sure each module installed displays a green Power LED (see Figure 2-4). Verify that any module that does not display a green LED is properly seated in the chassis backplane. Power Sensing Considerations T
ページ20に含まれる内容の要旨
Powering Up Figure 2-4 Individual Module for the 20- and 10-Port Chassis (BL-89400ENT, BL-89500ENT, BL-89600ENT, and BL-89700ENT) !"! &' () * "+ ' " %",+-
!"! ." 2-6 Installation and Connection
