ページ1に含まれる内容の要旨
® ®
OmniView SMB OmniView SMB
KVM-over-IP Switch KVM-over-IP Switch
User Manual
F1DP108G
F1DP116G
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents 1. Introduction ...................................................................................... 1 Package Contents ......................................................................... 1 2. Overview .......................................................................................... 2 Remote-Management Features ..................................................... 2 Other Features ..............................................................................
ページ4に含まれる内容の要旨
Table of Contents 5. Using the Switch from a Remote Console ...................................... 43 Starting a Remote Session .................................................................... 43 Using the Quick-Access Toolbar .......................................................... 45 Mouse Configuration and Settings ...................................................... 46 Keyboard Configuration and Settings ................................................ 50 Video Configuration and
ページ5に含まれる内容の要旨
section Introduction Congratulations and thank you for purchasing the Belkin OmniView SMB KVM-over-IP Switch (the Switch). This Switch provides enterprise-class, 1 remote server management and allows you to monitor and control your servers from any location over a Transmission Control Protocol/Internet 2 Protocol (TCP/IP) connection. This round-the-clock access enables you to troubleshoot servers faster and more efficiently, reducing server downtime 3 and service costs. This User Manual p
ページ6に含まれる内容の要旨
Overview Remote-Management Features • Digital or Local User The Switch allows one user to access and control multiple servers from a local console, or from any remote console over a TCP/IP connection. • W eb-Browser Based You can access the Switch from any computer connected to the LAN, WAN, or Internet using Microsoft Internet Explorer version 6.0 or higher. • BIOS-Le vel Access The Switch allows you to remotely access the basic input/output system (BIOS) of your servers to make changes
ページ7に含まれる内容の要旨
section Overview Other Features 1 • CAT5 Technology Integrated CAT5 technology enables you to connect the Switch to your 2 servers up to 100 feet (30m) away using standard CAT5 cabling and compact Server Interface Modules. CAT5 cabling reduces cable bulk, 3 simplifies deployment, and allows for greater airflow in your racks, increasing the life span of your equipment. 4 • Keep-Alive Intelligence Belkin’s compact Server Interface Modules feature keep-alive intelligence, 5 which allows
ページ8に含まれる内容の要旨
Overview Equipment Requirements Server Interface Modules Connecting the Switch to a server requires a custom Belkin OmniView SMB Server Interface Module and a standard CAT5 patch cable. OmniView SMB Server Interface Modules: F1DP101A-AP F1DP101A-AP (PS/2 style) F1DP101A-AU (USB style) ™ F1DP101A-AL (Legacy Sun miniDIN8 style) F1DP101A-AP-8PK (PS/2 style, 8-pack) Note: Product codes and availability may vary. F1DP101A-AU F1DP101A-AL 4 4
ページ9に含まれる内容の要旨
section Overview Cables 1 Belkin highly recommends you use Belkin Category 5e, FastCAT5e, or Category 6 Patch Cables for your SMB 2 KVM-over-IP Switch to help ensure the superior performance of your video. 3 These Cables offer the highest quality possible to ensure optimal data and video transmission. 4 A3L791-XX-YYY Belkin UTP Patch Cables: A3L850-XX-YYY 5 A3L980-XX-YYY A3L791-XX-YYY (CAT5e) ™ A3L850-XX-YYY (FastCAT 5e) A3L980-XX-YYY (CAT6) 6 Note: Use CAT6 solid cables for 7 optimal
ページ10に含まれる内容の要旨
Overview System Requirements Operating-System (OS) Platforms The SMB KVM-over-IP Switch is compatible with CPUs running on, but not limited to, the following OS platforms: ® ® • Windows NT , 2000, XP, Server 2003 ® • Microsoft DOS 5.x and above ® ® • Red Hat Linux 8.x and above ™ • Sun ™ • Novell 5.x ™ • Solaris 8.x and above Keyboards • PS/2-compatible Mice • PS/2-compatible with 2, 3, 4, or 5 buttons • PS/2-compatible wireless and optical mice Monitors • CRT and LCD (with VGA support) Remote-
ページ11に含まれる内容の要旨
section Overview Unit Display Diagrams 1 Front View 2 3 AutoScan Button 7-Segment LED for 4 BANK Identification LED Indicators for Port Identification 5 � ���� � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� 6 Port Selectors 7 BANK Scroll Buttons 8 (F1DP116G model shown) 9 10 Back View Daisy-Chain Port Console VGA Serial-Device Port Monitor Port AC Power CPU Connections Using CAT5 Cabling ��� �� ��� ������ � ��� ������� � ��� ��� ���� �� �� Ethernet Cooling Fan Connection Console
ページ12に含まれる内容の要旨
Overview Specifications Part No.: F1DP108G, F1DP116G No. of Users Supported: 1 digital or 1 local No. of Servers Supported: 8 and 16 respectively for 8- and 16-port models Daisy-Chain: Maximum of 16 Switches* Enclosure: Metal enclosure with high-impact plastic faceplate Power Requirements: 100–240VAC @ 47–63Hz/1A Operating Temp: 32° to 104° F (0° to 40° C) Storage Temp: -4° to 140° F (-20° to 60° C) Humidity: 0-80% RH, non-condensing Video-Resolution Support: Local analog port: Up to 1
ページ13に含まれる内容の要旨
section Overview Dimensions: (F1DP108G) 17.25 x 1.75 x 7.5 in. (438 x 45 x 190mm) 1 (F1DP116G) 17.25 x 1.75 x 7.5 in. (438 x 45 x 190mm) 2 Weight: (F1DP108G) 5.0 lbs. (2.3kg.) (F1DP116G) 5.0 lbs. (2.3kg.) 3 *May be daisy-chained with up to 15 OmniView SMB and PRO2 KVM Switches. OmniView SMB KVM-over-IP Switches may not be daisy-chained together. 4 **Typical bandwidth is defined as typical “non-intensive” administrative use at 16-bit color, 1024x768 resolution. 5 Note: Specifications
ページ14に含まれる内容の要旨
Overview SMB Server Interface Module, USB Part No.: F1DP101A-AU Emulation: Keyboard and mouse signals Power: Via attached server Keyboard/Mouse Connection: USB Type A Monitor Connection: HDDB15 male (VGA) Resolution Support: Up to 1600x1200 @ 75Hz Max. Distance Supported: 100 ft. (30m) Weight: 0.25 lbs. (0.11kg.) Unit Dimensions: 1.8 x 3.5 x 0.9 in. (46 x 89 x 23mm) VGA-Cable Length: 8 in. (203mm) USB-Cable Length: 19 in. (483mm) SMB Server Interface Module, Legacy Sun Part No.: F1DP101A-AL Emu
ページ15に含まれる内容の要旨
section Local Installation Pre-Configuration 1 � � ������� �� 2 ������� ����� ����� � ���������� ���� 3 4 ���� �� ��� ��� �� � �������������� ����� �� �������� �� � 5 6 7 ��� ��������� � 8 9 (Typical Switch configuration) 10 Where to place the Switch: The enclosure of the Switch is designed for stand-alone or rack-mount configuration. The Switch can be mounted to a standard 19-inch server rack using the included rack-mount brackets and screws. Consider the following when deciding where to pla
ページ16に含まれる内容の要旨
Local Installation Cable-Distance Requirements (for PS/2, USB, and Sun Servers) VGA signals transmit best up to 100 feet (30m). Beyond that length, the probability of video degradation increases. For this reason, Belkin recommends that the length of the CAT5 UTP cable between the Switch and the connected servers does not exceed 100 feet (30m). Note: The Belkin CAT5 Extender (F1D084) may be used to extend your console (keyboard, mouse, and monitor) by up to 300 feet (91m). Warning: Avoid pla
ページ17に含まれる内容の要旨
section Local Installation Step 1 Mounting the Switch 1 Note: Before you begin, locate the MAC address and device number on the back of the Switch. You will need these numbers later in the installation process, 2 so it is highly recommended that you record these numbers below before mounting the Switch to your rack. 3 MAC Address Device Number 4 The Switch includes adjustable mounting brackets ideal for installation in 5 19-inch racks. The mounting brackets feature three adjustment positi
ページ18に含まれる内容の要旨
Local Installation Step 2 Connecting the Console to the Switch 2.1 Connect your monitor VGA cable to the VGA port on the back of the Switch in the “Console” section. (Refer to diagram below.) ��� �� ��� ������ � ��� ������� � ��� ��� ���� �� �� 2.2 Connect your keyboard and mouse PS/2 cables to the PS/2 keyboard and mouse ports on the back of the Switch in the “Console” section. (Refer to diagram below.) ��� �� ��� ������ � ��� ������� � ��� ��� ���� �� �� 14
ページ19に含まれる内容の要旨
section Local Installation 2.3 Locate and connect a cable from your local area network to the RJ45 Ethernet port on the back of the Switch. (Refer to diagram below.) 1 2 3 ��� �� ��� ������ � ��� ������� � ��� ��� ���� �� �� 4 5 6 2.4 Attach the power cord to the IEC power jack on the back of the Switch, and power up the Switch. (Refer to diagram below.) 7 8 ��� �� ��� ������ � ��� ������� � ��� ��� ���� �� �� 9 10 15
ページ20に含まれる内容の要旨
Local Installation Step 3 Connecting Servers to the Switch (PS/2 Connection) 3.1 Make sure your server is powered off. 3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2 (F1DP101A-AP), connect the VGA connector to the monitor port on your server. (Refer to diagram below.) Server Server Interface Module 3.3 Connect the PS/2 mouse and keyboard connectors to the mouse and keyboard ports on the server. (Refer to diagram below.) 16
