ページ1に含まれる内容の要旨
16-Port Gigabit Switch
24-Port Gigabit Switch
Belkin Tech Support Belkin Ltd.
US: 877-736-5771 7 Bowen Crescent, West Gosford
310-898-1100 ext. 2263 NSW 2250, Australia
Europe: 00 800 223 55 460 +61 (0) 2 4372 8600
Australia: 1800 235 546 +61 (0) 2 4372 8603 fax
New Zealand: 0800 235 546
Singapore: 800 616 1790 Belkin B.V.
Boeing Avenue 333
Belkin Corporation 1119 PH Schiphol-Rijk, The Netherlands
501 West Walnut Street +31 (0) 20 654 7300
Los Angeles, CA 90220-5221, USA +31 (0) 20 654 7349 fax
ページ2に含まれる内容の要旨
16-Port Gigabit Switch 24-Port Gigabit Switch Share large files at faster network speeds, with maximum efficiency � � � � � � � � � � � � User Manual � � � � � � � � � � � F5D5141-16 F5D5141-24 � � � � � � � � � � � � � � � � � � � � � � � � � ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ���� � � � � � � � � �
ページ3に含まれる内容の要旨
Table of Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Getting to Know your Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Connecting Networking Devices to your Switch. . . . . . . . . . . . . . . . 4
ページ4に含まれる内容の要旨
section Introduction Congratulations on your purchase of this high-quality Belkin 16- or 1 24-Port Gigabit Switch. Backward-compatible with 10/100 networks, each Switch easily integrates into a new or existing network for instant high performance. It delivers dedicated 100Mbps links to 2 each directly attached LAN segment or PC, enabling your servers and workstations to transfer large AV and graphic files efficiently 3 throughout your network. This makes the Switch an excellent way to incr
ページ5に含まれる内容の要旨
Introduction Features - High-speed, dedicated 10/100/1000 Ethernet ports • 16 ports (Belkin 16-Port Gigabit Switch F5D5141-16) • 24 ports (Belkin 24-Port Gigabit Switch F5D5141-24) - Standards • IEEE 802.3 z/ab 1000Base-T • IEEE 802.3u 100Base-Tx • IEEE 802.3 10Base-T - Place on your desk or 19-inch rack - Internal power supply (100–240VAC/50–60Hz universal input) - Auto MDI/MDIX ports - Auto-negotiation between 10-, 100-, and 1000Mbps on all ports - Auto-negotiation for full and hal
ページ6に含まれる内容の要旨
section Introduction Getting to Know your Switch 1 Front-Panel LEDs Belkin 16- or 24-Port Gigabit Switches feature two rows of LEDs 2 that provide information about connection speed, link/activity, plus a separate Power LED. 3 (b) 4 5 � � � � � � � � � � � � � � � � � � � � � � 6 (a) (c) (a) Power (POWER) LED 7 • Green – Power on, normal operation • Off – Power off, no power to the Switch 8 (b) Link and Activity (Link/Act) LED • Solid Green – Network device is correctly connected to the Sw
ページ7に含まれる内容の要旨
C Co on nn ne ec ct ti in ng g N Ne et tw wo or rk ki in ng g D De ev vi ic ce es s t to o y yo ou ur r S Sw wi it tc ch h Connecting your Switch to your Computers 1. Power down all your equipment. 2. Connect a Category 5e or 6 Ethernet cable between each computer’s network interface card (NIC) and one of the numbered ports on the front of the Switch. 3. All switch ports can automatically negotiate speeds at full- and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and
ページ8に含まれる内容の要旨
section Connecting Networking Devices to your Switch 1 Connecting your Switch to another Switch 1. Connect a Category 5e or 6 cable between one of the numbered 2 ports on the front of the Switch and one of the numbered ports on the other Switch to which you are cascading or connecting. 3 2. All switch ports can automatically negotiate speeds at full-and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1000Base-T network switches or hubs. 4 3. All ports support auto MDI an
ページ9に含まれる内容の要旨
Applications This Switch segments your network, significantly increasing both bandwidth and throughput. Each port on the Switch can be attached to any Ethernet, Fast Ethernet, or Gigabit Ethernet device, such as another switch, or a server’s network adapter. All ports operate at 10/100Mbps full and half duplex, or 1000Mbps full duplex, providing up to 2Gbps of bandwidth to the attached device. Bridging Functions This Switch provides fully transparent bridging functions. It automatically le
ページ10に含まれる内容の要旨
section Placement of the Switch 1 The Switches can be placed on a flat surface or in a 19-inch rack. Placement on a Flat Surface 2 1. Affix the four included rubber feet on the bottom of the Switch in the area that is clearly marked on each of the four corners. 3 2. Make sure the Switch is placed in an area that allows for proper ventilation. 4 3. Place on a flat surface. 5 Placement in a 19-Inch Rack 1. Do not affix the four rubber feet on the Switch when rack-mounting. If already affixed, r
ページ11に含まれる内容の要旨
P Pr ro od du uc ct t S Sp pe ec ci if fi ic ca at ti io on ns s P P Ph h hy y ys s si i ic c ca a al l l C C Ch h ha a ar r ra a ac c ct t te e er r ri i is s st t ti i ic c cs s s Standards Conformance IEEE Std 802.3-2002 Communication Rate 10-, 100-, and 1000Mbps Communication Mode Full or half duplex at 10/100Mbps Full duplex at 1000Mbps Media Supported 10Base-T: 100-Ohm Category 3 or better twisted-pair 100Base-Tx: 100-Ohm Category 5 or better twisted-pair 1000Base-T: 100-Ohm Category
ページ12に含まれる内容の要旨
section Product Specifications 1 Switching Criteria Network Bridging Function Filtering, forwarding, and learning 2 Switching Method Store-and-forward MAC Address Table F 5D5141-16: 8K entries 3 F5D5141-24: 8K entries Packet Buffer F5D5141-16: 320Kb F5D5141-24: 480Kb 4 5 6 7 8 9 9
ページ13に含まれる内容の要旨
T Tr ro ou ub bl le es sh ho oo ot ti in ng g Diagnosing Switch Indicators Symptom Power LED does not light after power on. Probable Causes AC power cord may be defective. Possible Solutions • Check for loose connections. • Check the power outlet by using it for another device. • Replace the AC power cord. Symptom Port (Link/Act) LED does not light after connection is made. Probable Causes Switch port, network card, or cable may be defective. Possible Solutions • C heck that the Switch and
ページ14に含まれる内容の要旨
section Troubleshooting Power and Cooling Problems 1 If the power indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, 2 power cord, or internal power supply as explained in the previous section. However, if the unit powers off after running for a while, check for loose power connections, power losses 3 or surges at the power outlet, and verify that the fan on the right side of the unit (F5D5141-24) is unobstructed and running 4 prior
ページ15に含まれる内容の要旨
I In nf fo or rm ma at ti io on n EMI Certification FCC Class A Certification (USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful in
ページ16に含まれる内容の要旨
section Information RFI Emission: 1 • Limit class A according to EN 55022:1998, IEC 60601-1-2 (EMC, medical) 2 • Limit class A for harmonic current emission according to EN 61000-3-2/1995 • L imitation of voltage fluctuation and flicker in low-voltage supply 3 system according to EN 61000-3-3/1995 4 Immunity: • Product family standard according to EN 55024:1998 • Electrostatic Discharge according to EN 61000-4-2:1995 5 (Contact Discharge: ±4kV, Air Discharge: ±8kV) • R adio-frequenc
ページ17に含まれる内容の要旨
I In nf fo or rm ma at ti io on n Safety Compliance Please read the following safety information carefully before installing the Switch: Warning: Do not plug a phone-jack connector into the RJ45 port. This may damage this device. Warning: This product does not contain any user-serviceable parts. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground AC-outlet line to prevent electrical hazards and to comply wi
ページ18に含まれる内容の要旨
section Information Belkin Corporation Limited Lifetime Product Warranty 1 What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin 2 product that the product shall be free of defects in design, assembly, material, or workmanship. 3 What the period of coverage is. Belkin Corporation warrants the Belkin product for the lifetime of the product. 4 What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any def
ページ19に含まれる内容の要旨
I In nf fo or rm ma at ti io on n Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost,
ページ20に含まれる内容の要旨
section Information 1 2 3 4 5 6 7 8 17 17
