ページ1に含まれる内容の要旨
8 ports 10/100/1000Mbps
Gigabit Ethernet Desktop Switch Layer 2
USER’S GUIDE
ページ2に含まれる内容の要旨
The Atlantis Land logo is a registered trademark of Atlants Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc
ページ3に含まれる内容の要旨
TABLE OF CONTENTS ABOUT THIS GUIDE ..................................................1 TERMS..................................................................................... 1 OVERVIEW OF THIS USER’S GUIDE ............................................ 1 INTRODUCTION ...........................................................2 GIGABIT ETHERNET TECHNOLOGY............................................. 2 FAST ETHERNET TECHNOLOGY ................................................. 3 SWITCHIN
ページ4に含まれる内容の要旨
FRONT PANEL ........................................................................ 10 REAR PANEL .......................................................................... 11 LED INDICATORS.................................................................... 11 PRODUCT SUPPORT .............................................13 TECHNICAL SPECIFICATIONS........................14 ii
ページ5に含まれる内容の要旨
ABOUT THIS GUIDE This user’s guide tells you how to install your 8-port 10/100/1000Mbps Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the 8-port 10/100/1000Mbps Gigabit Ethernet Switch, and “switch” (first letter lower case) to refer to all Ethernet switches, including the 8-port 10/100/1000Mbps Gigabit Ethernet Switch. Overview of this User’s Guide ♦
ページ6に含まれる内容の要旨
INTRODUCTION This section describes the features of the 8-port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over 10
ページ7に含まれる内容の要旨
Gigabit Ethernet enables fast optical fiber connections to support video conferencing, complex imaging, and similar data- intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethernet, servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time. In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage of today and tomorrow’s
ページ8に含まれる内容の要旨
disruptive and smooth evolution nature, and the dominating potential market base, virtually guarantee cost effective and high performance Fast Ethernet solutions in the years to come. 100Mbps Fast Ethernet is a new standard specified by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps Ethernet standard with the ability to transmit and receive data at 100Mbps, while maintaining the CSMA/CD Ethernet protocol. Since the 100Mbps Fast Ethernet is compatible with all other 10
ページ9に含まれる内容の要旨
The switch acts as a high-speed selective bridge between the individual segments. Traffic that needs to go from one segment to another is automatically forwarded by the switch, without interfering with any other segments. This allows the total network capacity to be multiplied, while still maintaining the same network cabling and adapter cards. Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies.
ページ10に含まれる内容の要旨
Performance features ♦ Auto MDI/MDI-X for each port ♦ Support Full/Half duplex transfer mode for 10 and 100Mbps ♦ Support Full duplex transfer mode for 1000Mbps ♦ Wire speed reception and transmission ♦ Store-and-Forward switching method ♦ Supports 4K absolute MAC addresses ♦ Supports 3.5MBit RAM for data buffering ♦ Extensive front-panel diagnostic LEDs ♦ IEEE 802.3x flow control for full-duplex ♦ Back pressure flow control for half-duplex UNPACKING AND SETUP This chapter pr
ページ11に含まれる内容の要旨
♦ One 8-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four rubber feet with adhesive backing ♦ One external power adapter ♦ This User’s Guide (CD-Rom) If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Switch can be performed using the following steps: ♦ The surface must support at least 5 kg. ♦ Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operation temperature a
ページ12に含まれる内容の要旨
♦ Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the objects around it. Gigabit Ethernet Switch installed on a Desktop or Shelf Connecting Network Cable The 8-Port
ページ13に含まれる内容の要旨
ports runs both half duplex and full duplex while they’re running in 10Mbps or 100Mbps and runs full duplex while they’re running in 1000Mbps. These ports are Auto-MDI type port, these ports can auto transform to MDI-II or MDI-X type, so you can just make an easy connection that without worrying if you are using a standard or crossover cable. Power on The 8-port Gigabit Ethernet Switch can be used with DC power adapter [200~240V AC, 50~60 Hz].
ページ14に含まれる内容の要旨
IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The front panel of the Switch consists of 8 Gigabit Ethernet port, and LED indicators. Front panel view of the 8-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Eight 10/100/1000Mbps Gigabit Ethernet ports ♦ Comprehensive LED indicators that display the conditions of the Switch and status of the network. A description of these LED indicators follows (see
ページ15に含まれる内容の要旨
Rear Panel The rear panel of the Switch consists of an DC power connector. The following figure shows the rear panel of the Switch. Rear panel view of the 8-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ DC Power Jack: Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. LED Indicators The LED indicators of the Switch include Power, Link/Act, 1000Mbps and 100Mbps. The following shows
ページ16に含まれる内容の要旨
The 8-port 10/100/1000Mbps Gigabit Ethernet Switch LED indicators ♦ POWER: This indicator lights green when the Switch is receiving power, otherwise, it is off. ♦ LINK/ACT: These LED indicators are lighted up when there is a secure connection (or link) to the desired port. The LED indicators blinking whenever there is reception or transmission (i.e. Activity—Act) of data occurring at a port. ♦ 1000Mbps : These LED indicators are lighted up when there is a secure connection (or lin
ページ17に含まれる内容の要旨
PRODUCT SUPPORT If you continue to have problems you should contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Via De Gasperi 122 20017 Mazzo di Rho(MI) Tel: 02/93906085, 02/93907634(help desk) Fax: 02/93906161 Email: info@atlantis-land.com or tecnici@atlantis-land.com WWW: http://www.atlantisland.it or www.atlantis-land.com
ページ18に含まれる内容の要旨
TECHNICAL SPECIFICATIONS General IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Standards: IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 Auto-negotiation IEEE 802.3x Full duplex Flow Control Protocol: CSMA/CD Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) Data Transfer Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) Rate: Gigabit Ethernet: 2000 Mbps (full-duplex) Topology Star Ethernet: 2-pair UTP Cat. 3/4/5 Network Fast Etherne
ページ19に含まれる内容の要旨
Physical and Environmental DC inputs: 200 – 240 VAC, 50/60 Hz Power 11 watts max (8 ports) Consumption: Operating 0 ~ 40 degrees Celsius Temperature: Storage -10 ~ 55 degree Celsius Temperature: Humidity: 5% ~ 95% RH, non-condensing Dimensions: 190 mm x 120 mm x 38 mm EMI: FCC Class A, CE Mark Class A, VCCI-A Safety: UL (UL 1950), TUV/GS (EN60950) Performance Transmission Store-and-forward Method: RAM Buffer: 3.5Mbit per device Filtering Address 4K MAC address per device
