ページ1に含まれる内容の要旨
Cat 5 High-Density KVM Over the NET™
KH1508i / KH1516i
User Manual
www.aten.com
ページ2に含まれる内容の要旨
KH1508i / KH1516i User Manual FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
ページ3に含まれる内容の要旨
KH1508i / KH1516i User Manual User Information Online Registration Be sure to register your product at our online support center: International http://support.aten.com North America ATEN TECH http://www.aten-usa.com/product_registration ATEN NJ http://support.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 North America ATEN TECH 1-888-999-ATEN ATEN NJ 1-732-356-1703 User Notice All information, documentation, and specifications contained in this
ページ4に含まれる内容の要旨
KH1508i / KH1516i User Manual Package Contents The KH1508i / KH1516i package consists of: 1 KH1508i or KH1516i Cat 5 High-Density KVM Over the NET™ Switch 1 Firmware Upgrade Cable 1Power Cord 1 Rack Mount Kit 1 Foot Pad Set (4 pcs.) 1 User Manual* 1 Quick Start Guide Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures
ページ5に含まれる内容の要旨
KH1508i / KH1516i User Manual Contents FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Telephone Support . . . . . . .
ページ6に含まれる内容の要旨
KH1508i / KH1516i User Manual Chapter 3. Basic Operation Port Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Keyboard Hotkeys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Hot Plugging . . . .
ページ7に含まれる内容の要旨
KH1508i / KH1516i User Manual Adapter Cable Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Starting the Upgrade:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Upgrade Succeeded:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Adapter Cable Firmware Upgrade Recovery . . . . . . . . . . . . . . . . . . .49 Chapter 5. Browse
ページ8に含まれる内容の要旨
KH1508i / KH1516i User Manual Working Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 I/O Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 The Configuration Page . . . . . . . . . . . . . . . . . . . . .
ページ9に含まれる内容の要旨
KH1508i / KH1516i User Manual Chapter 9. The Log Server Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 Starting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 The Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Configure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Events . . . .
ページ10に含まれる内容の要旨
KH1508i / KH1516i User Manual The Java Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 The Log Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Panel Array Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Sun Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Additional Mouse Synchronization Procedures. . . . . . . . . . . .
ページ11に含まれる内容の要旨
KH1508i / KH1516i User Manual About This Manual This User Manual is provided to help you get the most from your KH1508i / KH1516i system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Overview Chapter 1, Introduction, introduces you to the KH1508i / KH1516i system. Its purpose, features and benefits are presented, and its front and back panel components are described. Chapter 2, Hardware Setup, descr
ページ12に含まれる内容の要旨
KH1508i / KH1516i User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. Indicates keys you should press. For example, [Enter] means [ ] to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. Numbered lists represent procedures with sequential steps. 1. Bullet lists provide information, but do not involve sequential ♦ steps. Indicates selecting the o
ページ13に含まれる内容の要旨
Chapter 1 Introduction Overview The KH1508i / KH1516i KVM Switches are control units that allow access to multiple computers from a single KVM (keyboard, monitor, and mouse) console. A single KH1508i / KH1516i can control up to 8 / 16 computers. As many as 15 additional KH1508 / KH1516 switches can be daisy chained from the original unit, so that up to 256 computers can all be controlled from the original KVM console. Note: Aten ACS1208 / ACS1216 switches can also be installed on a KH1508i
ページ14に含まれる内容の要旨
KH1508i / KH1516i User Manual For local access, the KH1508i / KH1516i supports resolutions of up to 1600 x 1200, as well as 1280 x 1024 @ 75Hz for an extended distance of up to 40 m. For remote access, the switches support up to 1280 x 1024 @ 75Hz. The switches feature RJ-45 connectors and CAT 5 cable to link to the computers. Utilizing PS/2, USB, and serial KVM Adapter Cables for the final linkup, the KH1508i / KH1516i permits any combination of PCs, Macs, Sun computers, and serial devices
ページ15に含まれる内容の要旨
Chapter 1. Introduction Features A single console controls up to 8 (KH1508i) or 16 (KH1516i) computers Dedicated chain ports - daisy chain up to 15 additional units - control up to 256 computers from a single console Extends the distance between computers and switch - up to 30m for resolutions of 1600 x 1200 @ 60Hz; up to 40 m for resolutions of 1280 x 1024 @ 75Hz Custom ASIC (patent pending) auto-senses station's position on daisy chained installations - no need for manual DIP switch s
ページ16に含まれる内容の要旨
KH1508i / KH1516i User Manual Requirements General For best results, we recommend that the computers used to access the KH1508i / KH1516i have at least a P III 1 GHz processor, and that their screen resolution is set to 1024 x 768 For best results, we recommend an Internet connection speed of at least 128 kbps Browsers must support 128 bit data encryption To run the Windows client, you must have DirectX 8.0 or higher installed To run the Java client, you must have Sun’s JRE 6 update 3or
ページ17に含まれる内容の要旨
Chapter 1. Introduction KVM Adapter Cables Cat 5 (or higher) cable is required to connect the KH1508i / KH1516i to a KVM Adapter Cable (see Single Station Installation, page 12). The following KVM Adapter Cables are required for use with the KH1508i / KH1516i: Function Module Connect to devices with PS/2 ports KA9520 Connect to devices with USB ports KA9570 Connect to Sun Legacy systems (with 13W3 port) KA9130 Connect to Sun USB systems KA9131 Connect to serial based devices KA9140 Supporte
ページ18に含まれる内容の要旨
KH1508i / KH1516i User Manual Components Front View KH1508i 1&2 3 4 5 67 KH1516i 1&2 35 467 6
ページ19に含まれる内容の要旨
Chapter 1. Introduction Compo- No. Description nent 1Port Press a switch to give the KVM focus to the computer attached Selection to its corresponding port. Switches Simultaneously pressing Buttons 1 and 2 for 3 seconds performs a Keyboard and Mouse Reset. Simultaneously pressing Buttons 7 and 8 starts Auto Scan Mode. 2 Port LEDs The Port LEDs are built into the Port Selection Switches. The left ones are the On Line LEDs; the right ones are the Selected Port LEDs: An ONLINE LED light
ページ20に含まれる内容の要旨
KH1508i / KH1516i User Manual Rear View KH1508i 12 34 5 6 7 KH1516i 12 34 5 6 7 No. Component Description 1 Power Socket The AC power cord plugs in here. 2 Power Switch This rocker switch powers the unit on and off. 3 LAN Port The cable that connects the KH1508i / KH1516i to the Internet plugs in here. The LEDs indicate data transmission speed: ORANGE for 10 Mbps; GREEN for 100 Mbps. 4 PON Port This connector is provided for a Power over the Net™ (PON) unit to plug into. A PON device allows c
